Questions About No Limit Bolt in IFS For 62 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

forestb · 01-20-2009, 09:56 PM

Hi I am new to the sight and was wondering if anybody has any experience with the No Limit Bolt in IFS for a 62 C-10? Or if anybody has any information on how difficult it would be to swap the 62's frame for a 63-66 c-10's frame? It currently has torsion bars in the front and am looking to lower it more than just the 2 1/2 inches that drop spindles provide and at the same time improve the ride quality.

*LILRED66* · 01-20-2009, 10:21 PM

forestb:

Welcome to the forums from Kansas City, KS.

There are a number of guys that can speak to the swap you are attempting.

Remember to post early and often...especially photos.

Rokcrln · 01-21-2009, 12:31 AM

I am not sure but I believe Nate from www.porterbuiltstreetrods.com has a bolt in DropMember for your ride that will give down in the weeds stance with the addition of a power rack for better handling as well. He is here on the board as well.

Kevin
LFD Inc.

forestb · 01-21-2009, 09:53 PM

Hi, thanks for the info I will take a look.

orange71 · 01-21-2009, 11:35 PM

I have purchased the drop member from nate and love it. i live in upland if you want to stop by and check i out! Worth the money!

forestb · 01-22-2009, 10:03 PM

Im sorry maybe I am just out of the loop, but who or what is nate?
Thanks

PBFAB.COM · 01-22-2009, 11:46 PM

Here's a link to the 60-62 Dropmember version:

http://www.67-72chevytrucks.com/vboa...d.php?t=295365

It has also been updated to the V3 design:

http://www.67-72chevytrucks.com/vboa...d.php?t=323437

edflores · 01-22-2009, 11:56 PM

Quote:

Originally Posted by orange71

I have purchased the drop member from nate and love it. i live in upland if you want to stop by and check i out! Worth the money!

can i go check it out? any link to your project?

orange71 · 01-23-2009, 01:19 AM

http://www.sportruck.com/events/bloo...-2008/i32.html Here is a pic from a local show. the truck is now stripped to a rolling chassis. let me know if you want to come by and check i out

edflores · 01-23-2009, 04:28 AM

i didnt realize it had a dropmember. i saw it in person at that show.

orange71 · 01-23-2009, 11:59 AM

Ya the hood was on the entire time of the show. It didnt have hood hinges so it was stuck

edflores · 01-23-2009, 03:30 PM

Quote:

Originally Posted by orange71

Ya the hood was on the entire time of the show. It didnt have hood hinges so it was stuck

are you taking it to forbidden?
is your chassis from the firewall back or a full custom frame?
i already bought my dropmember for my 81, however, i am still trying to convinvce my buddy to get one for his 70 k5.

orange71 · 01-23-2009, 04:07 PM

The truck might go to forbidden, im not sure yet. I want to get it powdercoated by then but we will see. The frame is new from the cab back all designed on the computer.

abadsvt · 01-23-2009, 05:33 PM

Quote:

Originally Posted by orange71

The truck might go to forbidden, im not sure yet. I want to get it powdercoated by then but we will see. The frame is new from the cab back all designed on the computer.

Sweet looking truck! Very clean! Got anymore pics?

Josh

orange71 · 01-23-2009, 06:15 PM

I am planning on starting a build thread to show the current state of the truck. Thanks for the compliments! I will try to get some up by tomorrow

01-20-2009, 09:56 PM	#1
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Questions About No Limit Bolt in IFS For 62 C-10 Hi I am new to the sight and was wondering if anybody has any experience with the No Limit Bolt in IFS for a 62 C-10? Or if anybody has any information on how difficult it would be to swap the 62's frame for a 63-66 c-10's frame? It currently has torsion bars in the front and am looking to lower it more than just the 2 1/2 inches that drop spindles provide and at the same time improve the ride quality. Last edited by forestb; 01-20-2009 at 09:57 PM.

01-20-2009, 10:21 PM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Questions About No Limit Bolt in IFS For 62 C-10 forestb: Welcome to the forums from Kansas City, KS. There are a number of guys that can speak to the swap you are attempting. Remember to post early and often...especially photos.

01-21-2009, 12:31 AM	#3
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Questions About No Limit Bolt in IFS For 62 C-10 I am not sure but I believe Nate from www.porterbuiltstreetrods.com has a bolt in DropMember for your ride that will give down in the weeds stance with the addition of a power rack for better handling as well. He is here on the board as well. Kevin LFD Inc. Last edited by Rokcrln; 01-21-2009 at 12:32 AM.

01-21-2009, 09:53 PM	#4
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Questions About No Limit Bolt in IFS For 62 C-10 Hi, thanks for the info I will take a look.

01-21-2009, 11:35 PM	#5
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Questions About No Limit Bolt in IFS For 62 C-10 I have purchased the drop member from nate and love it. i live in upland if you want to stop by and check i out! Worth the money!

01-22-2009, 10:03 PM	#6
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Questions About No Limit Bolt in IFS For 62 C-10 Im sorry maybe I am just out of the loop, but who or what is nate? Thanks Last edited by forestb; 01-22-2009 at 10:04 PM.

01-22-2009, 11:46 PM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Questions About No Limit Bolt in IFS For 62 C-10 Here's a link to the 60-62 Dropmember version: http://www.67-72chevytrucks.com/vboa...d.php?t=295365 It has also been updated to the V3 design: http://www.67-72chevytrucks.com/vboa...d.php?t=323437 __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-23-2009, 01:19 AM	#9
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Questions About No Limit Bolt in IFS For 62 C-10 http://www.sportruck.com/events/bloo...-2008/i32.html Here is a pic from a local show. the truck is now stripped to a rolling chassis. let me know if you want to come by and check i out

01-23-2009, 04:28 AM	#10
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: Questions About No Limit Bolt in IFS For 62 C-10 i didnt realize it had a dropmember. i saw it in person at that show.

01-23-2009, 11:59 AM	#11
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Questions About No Limit Bolt in IFS For 62 C-10 Ya the hood was on the entire time of the show. It didnt have hood hinges so it was stuck

01-23-2009, 04:07 PM	#13
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Questions About No Limit Bolt in IFS For 62 C-10 The truck might go to forbidden, im not sure yet. I want to get it powdercoated by then but we will see. The frame is new from the cab back all designed on the computer.

01-23-2009, 06:15 PM	#15
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Questions About No Limit Bolt in IFS For 62 C-10 I am planning on starting a build thread to show the current state of the truck. Thanks for the compliments! I will try to get some up by tomorrow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.