20s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe14 · 01-20-2009, 11:18 PM

any body know if a 20 inch wheel will fit my truck. With a 4/6 drop on it.

flamingbig10 · 01-21-2009, 12:15 AM

they will, there's a bunch but coy's c-5 are the ones I know most about http://www.coyswheel.com/coys.html

joe14 · 01-21-2009, 12:43 AM

yeah that wat i had in mind but dont know what backspace to get and the bolt pattern. The truck is a 1985 the wheel width that i had in mind was 20x8.5 in front and 20x10 rear

flamingbig10 · 01-21-2009, 01:04 AM

the bolt pattern is 5x5, for the bs 5 1/4 front and rear 5 1/2, that what I would go

**N2TRUX** · 01-21-2009, 01:06 AM

joe14- There is tons of information to be found here and in the suspension forum to answer these questions.
Please do not turn this in to a wanted to buy post or it will be closed and infractions issued...

flamingbig10 · 01-21-2009, 01:13 AM

This might help
http://67-72chevytrucks.com/vboard/s...d.php?t=320893
http://67-72chevytrucks.com/vboard/s...d.php?t=323014

joe14 · 01-22-2009, 01:54 AM

my bad did not want to make it as a wanted to buy post will try not to do it anymore oh thnks flamingbig 10

flamingbig10 · 01-22-2009, 03:53 PM

no problem

Rollinsqrbdy · 01-22-2009, 09:55 PM

Quote:

Originally Posted by N2TRUX

joe14- There is tons of information to be found here and in the suspension forum to answer these questions.
Please do not turn this in to a wanted to buy post or it will be closed and infractions issued...

Okay so what is the deal? how was it he was trying to sell something. It seemed like he was just given information. Did i miss something? Dont take it wrong i know theirs rules but, i guess i just missed it.

redrat · 01-23-2009, 06:50 PM

the C-5's will fit just fine. you asked about the 20x10 and 20x8.5. Thats the exact set up im runing with more than a 4-6 drop and i have no problems at all.

joe231 · 01-23-2009, 06:52 PM

Quote:

Originally Posted by redrat

the C-5's will fit just fine. you asked about the 20x10 and 20x8.5. Thats the exact set up im runing with more than a 4-6 drop and i have no problems at all.

what is your back spacing?

joe14 · 01-23-2009, 09:13 PM

i was reading other post and read that coys will need grinding on the rotors to fit the front of chevy trucks. Or thats the earlier trucks

68c10owner · 01-23-2009, 09:37 PM

Quote:

Originally Posted by redrat

the C-5's will fit just fine. you asked about the 20x10 and 20x8.5. Thats the exact set up im runing with more than a 4-6 drop and i have no problems at all.

very nice truck

redrat · 01-23-2009, 11:28 PM

Quote:

Originally Posted by joe231

what is your back spacing?

5 1/4 front and 5 1/2 rear

Quote:

Originally Posted by joe14

i was reading other post and read that coys will need grinding on the rotors to fit the front of chevy trucks. Or thats the earlier trucks

That must be the earlier trucks. No grinding was needed for these to fit.

**N2TRUX** · 01-23-2009, 11:43 PM

Quote:

Originally Posted by Rollinsqrbdy

Okay so what is the deal? ..... i guess i just missed it.

Yes, you missed what I had to edit out. I don't think it was intended to be a "wanted to buy" so I cleaned it up and left the thread open.

joe14-Thanks for being understanding...

joe231 · 01-23-2009, 11:43 PM

Quote:

Originally Posted by redrat

5 1/4 front and 5 1/2 rear

thanks, you have any more pics? front, rear, 3/4 view?
what size tires?

love the truck BTW

Rollinsqrbdy · 01-24-2009, 12:07 AM

Quote:

Originally Posted by N2TRUX

Yes, you missed what I had to edit out. I don't think it was intended to be a "wanted to buy" so I cleaned it up and left the thread open.

joe14-Thanks for being understanding...

ohhhhh okay. Didnt mean to be rude, i just didnt know what was up. Thanks for clearing it up.

**N2TRUX** · 01-24-2009, 01:21 AM

That's cool.

Now back to the thread we hijacked...

NEVERENOUGH · 01-24-2009, 11:39 AM

Redrat that truck is sikk what are the specs of the suspension?

01-20-2009, 11:18 PM	#1
joe14 Registered User Join Date: Jan 2009 Location: Tyler,TX Posts: 67	20s any body know if a 20 inch wheel will fit my truck. With a 4/6 drop on it. Last edited by N2TRUX; 01-21-2009 at 01:04 AM. Reason: Only subscribing members can post "Wanted to Buy"

01-21-2009, 12:15 AM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 20s they will, there's a bunch but coy's c-5 are the ones I know most about http://www.coyswheel.com/coys.html __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-21-2009, 12:43 AM	#3
joe14 Registered User Join Date: Jan 2009 Location: Tyler,TX Posts: 67	Re: 20s yeah that wat i had in mind but dont know what backspace to get and the bolt pattern. The truck is a 1985 the wheel width that i had in mind was 20x8.5 in front and 20x10 rear

01-21-2009, 01:04 AM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 20s the bolt pattern is 5x5, for the bs 5 1/4 front and rear 5 1/2, that what I would go __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-21-2009, 01:06 AM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 20s joe14- There is tons of information to be found here and in the suspension forum to answer these questions. Please do not turn this in to a wanted to buy post or it will be closed and infractions issued... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-21-2009, 01:13 AM	#6
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 20s This might help http://67-72chevytrucks.com/vboard/s...d.php?t=320893 http://67-72chevytrucks.com/vboard/s...d.php?t=323014 __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 01-21-2009 at 01:16 AM.

01-22-2009, 01:54 AM	#7
joe14 Registered User Join Date: Jan 2009 Location: Tyler,TX Posts: 67	Re: 20s my bad did not want to make it as a wanted to buy post will try not to do it anymore oh thnks flamingbig 10

01-22-2009, 03:53 PM	#8
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 20s no problem __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-23-2009, 06:50 PM	#10
redrat gearhead Join Date: Jun 2007 Location: Tulsa OK Posts: 144	Re: 20s the C-5's will fit just fine. you asked about the 20x10 and 20x8.5. Thats the exact set up im runing with more than a 4-6 drop and i have no problems at all. Attached Images __________________ 2003 GMC Z71 Daily driver 1982 Chevy 2wd short bed, project, boxerdra@hotmail.com

01-23-2009, 09:13 PM	#12
joe14 Registered User Join Date: Jan 2009 Location: Tyler,TX Posts: 67	Re: 20s i was reading other post and read that coys will need grinding on the rotors to fit the front of chevy trucks. Or thats the earlier trucks

01-24-2009, 01:21 AM	#18
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 20s That's cool. Now back to the thread we hijacked... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-24-2009, 11:39 AM	#19
NEVERENOUGH Registered User Join Date: Jul 2004 Location: Chino Valley Az Posts: 210	Re: 20s Redrat that truck is sikk what are the specs of the suspension?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.