1966 bagged burban brake issues - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOBOTY · 01-26-2009, 10:26 AM

I have a 1966 suburban. It is bagged w/ 73-87 drop spindles calipers and rotors. My problem is how the brake line tucks up under the top control arm. The bolt connection on the caliper is on a 45 degree towards the front of the truck w/ the hard line mount back towards the back of the top bag mount on the cross member. So when the air is out it tucks under the control arm leaving it there after it is raised back looking like the brake line is in a bind. Anybody have any ideas????

shaneschevys · 01-26-2009, 11:08 AM

Welcome from FT Worth.

LOBOTY · 01-26-2009, 11:10 AM

Thank you this is an awsome site

**scotts62** · 01-26-2009, 11:10 AM

I would re route the lines in a safer spot. Its all fun and games until you cant stop.

Oh and

from OKC!

You may get a better responce in the 60-66 or suspension side.

LOBOTY · 01-26-2009, 11:36 AM

That was the plan to do some kind of re-route but wanted to see what or if someone else had a similar problem.

**scotts62** · 01-26-2009, 11:39 AM

Maybe put in the suspension area and post a couple of pics, you never know someone may have the same problem.

LOBOTY · 01-26-2009, 11:41 AM

10-4 new to this site so still learing where to post thanks

jsbgump · 01-26-2009, 12:00 PM

Welcome to the board from Texas

joe231 · 01-26-2009, 12:58 PM

yeah what scotts62 said and definitely post up some pics!!!

And

LOBOTY · 01-26-2009, 01:03 PM

10-4 will try and post some pics tonight.

72BlckButy · 01-26-2009, 02:17 PM

to the board from Mid-MO!!!

As you have found out, this place will become your second home. There's tons of information, friends, parts, .... and so much more.

And as mentioned above, try posting your question in other parts of the board for a better response. (60-66 and the Suspension forums)

Best of luck!

CHuf · 01-26-2009, 04:29 PM

Welcome from L,NC

Cyclone44 · 01-26-2009, 11:08 PM

from Knoxville Tn....

TimE · 01-31-2009, 12:37 PM

from south Alabama!!

robmrtnbb5 · 02-01-2009, 11:10 AM

welcome from missouri

DREAMS OF A 67 · 02-02-2009, 05:04 PM

Welcome from knoxville tn!!!

krue · 02-04-2009, 05:13 AM

Welcome to the board from South Mississippi!

01-26-2009, 10:26 AM	#1
LOBOTY Registered User Join Date: Aug 2008 Location: SPRING TX Posts: 16	1966 bagged burban brake issues I have a 1966 suburban. It is bagged w/ 73-87 drop spindles calipers and rotors. My problem is how the brake line tucks up under the top control arm. The bolt connection on the caliper is on a 45 degree towards the front of the truck w/ the hard line mount back towards the back of the top bag mount on the cross member. So when the air is out it tucks under the control arm leaving it there after it is raised back looking like the brake line is in a bind. Anybody have any ideas????

01-26-2009, 11:08 AM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 1966 bagged burban brake issues Welcome from FT Worth. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-26-2009, 11:10 AM	#3
LOBOTY Registered User Join Date: Aug 2008 Location: SPRING TX Posts: 16	Re: 1966 bagged burban brake issues Thank you this is an awsome site

01-26-2009, 11:10 AM	#4
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1966 bagged burban brake issues I would re route the lines in a safer spot. Its all fun and games until you cant stop. Oh and from OKC! You may get a better responce in the 60-66 or suspension side. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 01-26-2009 at 11:40 AM.

01-26-2009, 11:36 AM	#5
LOBOTY Registered User Join Date: Aug 2008 Location: SPRING TX Posts: 16	Re: 1966 bagged burban brake issues That was the plan to do some kind of re-route but wanted to see what or if someone else had a similar problem.

01-26-2009, 11:39 AM	#6
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1966 bagged burban brake issues Maybe put in the suspension area and post a couple of pics, you never know someone may have the same problem. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 01-26-2009 at 11:40 AM.

01-26-2009, 11:41 AM	#7
LOBOTY Registered User Join Date: Aug 2008 Location: SPRING TX Posts: 16	Re: 1966 bagged burban brake issues 10-4 new to this site so still learing where to post thanks

01-26-2009, 12:00 PM	#8
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 1966 bagged burban brake issues Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

01-26-2009, 12:58 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1966 bagged burban brake issues yeah what scotts62 said and definitely post up some pics!!! And __________________ *CHEVY ONLY* Last edited by joe231; 01-26-2009 at 12:59 PM.

01-26-2009, 01:03 PM	#10
LOBOTY Registered User Join Date: Aug 2008 Location: SPRING TX Posts: 16	Re: 1966 bagged burban brake issues 10-4 will try and post some pics tonight.

01-26-2009, 02:17 PM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1966 bagged burban brake issues to the board from Mid-MO!!! As you have found out, this place will become your second home. There's tons of information, friends, parts, .... and so much more. And as mentioned above, try posting your question in other parts of the board for a better response. (60-66 and the Suspension forums) Best of luck! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-26-2009, 04:29 PM	#12
CHuf Registered User Join Date: Jan 2009 Location: Winston-Salem,NC Posts: 54	Re: 1966 bagged burban brake issues Welcome from L,NC __________________

01-26-2009, 11:08 PM	#13
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 1966 bagged burban brake issues from Knoxville Tn....

01-31-2009, 12:37 PM	#14
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: 1966 bagged burban brake issues from south Alabama!! __________________ Just hopin' I live long enough to finish something!!!

02-01-2009, 11:10 AM	#15
robmrtnbb5 Registered User Join Date: Nov 2008 Location: archie mo Posts: 2,242	Re: 1966 bagged burban brake issues welcome from missouri __________________ bondo bob http://s424.photobucket.com/albums/p...albumview=grid <<<link to my stuff and project 68 step side build



Register or Log In To remove these advertisements.

02-02-2009, 05:04 PM	#16
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: 1966 bagged burban brake issues Welcome from knoxville tn!!! __________________ Joe

02-04-2009, 05:13 AM	#17
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: 1966 bagged burban brake issues Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Register or Log In To remove these advertisements.