Pro Street C-10 is ROLLING!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BOOB · 02-04-2009, 07:36 PM

FINALLY!!! The chassis is 100% finished, and done right. Of course the front will come down significantly. Kind of a crappy pic.

thirdstreettito · 02-04-2009, 07:43 PM

Looks good!

bigguy69 · 02-04-2009, 08:05 PM

i like it . what areyour plans for motor

BOOB · 02-04-2009, 08:18 PM

It's built to race with intentions to be a daily. I'll be using the 327 out of my Vette while I build my big block. I know the 327 is small but dont let it fool you, it was aproaching 450 at the wheels before I tore the car apart... and it'll turn almost 8,500 RPM!!! I'm piecing together a simple, reliable yet STOUT 454. Stock heads and bottom with a simple 4-71 blower and it should be tons of reliable fun.

yellowGT · 02-04-2009, 09:13 PM

BOOB, How did you do your rearend? My brother is going with a 20x14 wheel on the back. Wheels have a 4.5" of backspace so he will have to narrow the rearend and tub the bed out. Is this what you did? What rearend are you using? Back-halfed?

dirtdobber · 02-04-2009, 09:25 PM

that looks really good I would like to something like that to mine one day nice truck

C20-67_N_MO · 02-04-2009, 09:25 PM

Looking good!

Keep us updated!

BOOB · 02-04-2009, 09:50 PM

Complete back half, narrowed custom 2x4 rails to 27" outside to outside. I narrowed the 9 inch myself...4 link and wishbone.

nuke1 · 02-04-2009, 09:53 PM

that looks great, more pics though, PLEASE

big_al_71 · 02-04-2009, 10:13 PM

looks good but I would like to see the rear set up..

**lolife99** · 02-04-2009, 11:09 PM

Stick a Dropmember up front and the chassis will be done!

custom72c20 · 02-05-2009, 01:14 AM

that tnlooks bad!!!!

post up more pics please!!!

72BlckButy · 02-05-2009, 07:34 AM

Lookin' good!

BOOB · 02-05-2009, 11:19 AM

Quote:

Originally Posted by lolife99

Stick a Dropmember up front and the chassis will be done!

More pics soon.

I've seen those the board a few times. I'm considering it. Does the dropmember actually lower the front end a little on its own or is it strictly for added clearance? I really dont want to run a bag setup.

*project 67 sub* · 02-05-2009, 02:47 PM

im sure porterbuilt can build you one to run with springs or coilovers instead of bags

BOOB · 10-13-2009, 11:37 PM

Old thread but I decided to go with a dropmember! Im talking to Nate right now about the details. You cant tell me that dropping the front end just below the current rear for a SLIGHT rake wouldn't be SICK! AHHHHH!!!! I can't wait! I've been woring on an '52 panel for a guy ever since I posted this thread and just finished it last night. So now I've got a fistfull of cash and plenty of time!!!

*vegaschevy* · 10-14-2009, 12:06 AM

looks *****in. cant wait to see it done

nastyc10 · 10-14-2009, 12:08 AM

Sweet ride! I'm not to far from you. You will love the dropmember. I have one on my 70' with a slight rake and I think its killer!

BOOB · 10-24-2009, 01:06 AM

I haven't made progress 'cause I was working on this.....

http://67-72chevytrucks.com/vboard/s...d.php?t=328265

BOOB · 11-06-2009, 12:25 PM

Uh oooooohhhhh........

BOOB · 11-06-2009, 12:28 PM

I'm sure the 454 i'm building will work fine in something else

prostreetC-10 · 11-06-2009, 12:38 PM

LOL I had to look twice. I thought someone was telling me that my truck was rolling into the street or something. Congrats fellow tubber!!!

BOOB · 11-06-2009, 12:45 PM

That's funny!

**Dieselwrencher** · 11-06-2009, 06:14 PM

Very nice truck! It will be sweet when it's done! Shoot, it's sweet as a roller! LOL

**Hart_Rod** · 11-06-2009, 06:17 PM

Tubs are cool...............

.

02-04-2009, 07:36 PM	#1
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Pro Street C-10 is ROLLING!!! UPDATE FINALLY!!! The chassis is 100% finished, and done right. Of course the front will come down significantly. Kind of a crappy pic. Attached Images __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker Last edited by BOOB; 01-25-2010 at 11:07 PM.

02-04-2009, 07:43 PM	#2
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Pro Street C-10 is ROLLING!!! Looks good! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-04-2009, 08:05 PM	#3
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pro Street C-10 is ROLLING!!! i like it . what areyour plans for motor __________________ members met: redbaron69, billsbowtie,nc67

02-04-2009, 08:18 PM	#4
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! It's built to race with intentions to be a daily. I'll be using the 327 out of my Vette while I build my big block. I know the 327 is small but dont let it fool you, it was aproaching 450 at the wheels before I tore the car apart... and it'll turn almost 8,500 RPM!!! I'm piecing together a simple, reliable yet STOUT 454. Stock heads and bottom with a simple 4-71 blower and it should be tons of reliable fun. __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

02-04-2009, 09:13 PM	#5
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Pro Street C-10 is ROLLING!!! BOOB, How did you do your rearend? My brother is going with a 20x14 wheel on the back. Wheels have a 4.5" of backspace so he will have to narrow the rearend and tub the bed out. Is this what you did? What rearend are you using? Back-halfed? __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

02-04-2009, 09:25 PM	#6
dirtdobber Registered User Join Date: Jul 2008 Location: fort walton beach, fl Posts: 35	Re: Pro Street C-10 is ROLLING!!! that looks really good I would like to something like that to mine one day nice truck

02-04-2009, 09:25 PM	#7
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Pro Street C-10 is ROLLING!!! Looking good! Keep us updated! __________________ Coming Soon: Project 1970 Country Truck

02-04-2009, 09:50 PM	#8
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Complete back half, narrowed custom 2x4 rails to 27" outside to outside. I narrowed the 9 inch myself...4 link and wishbone. __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

02-04-2009, 09:53 PM	#9
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Pro Street C-10 is ROLLING!!! that looks great, more pics though, PLEASE __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-04-2009, 10:13 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Pro Street C-10 is ROLLING!!! looks good but I would like to see the rear set up.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-04-2009, 11:09 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: Pro Street C-10 is ROLLING!!! Stick a Dropmember up front and the chassis will be done! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-05-2009, 01:14 AM	#12
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: Pro Street C-10 is ROLLING!!! that tnlooks bad!!!! post up more pics please!!! __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

02-05-2009, 07:34 AM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pro Street C-10 is ROLLING!!! Lookin' good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-05-2009, 02:47 PM	#15
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Pro Street C-10 is ROLLING!!! im sure porterbuilt can build you one to run with springs or coilovers instead of bags

10-13-2009, 11:37 PM	#16
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Old thread but I decided to go with a dropmember! Im talking to Nate right now about the details. You cant tell me that dropping the front end just below the current rear for a SLIGHT rake wouldn't be SICK! AHHHHH!!!! I can't wait! I've been woring on an '52 panel for a guy ever since I posted this thread and just finished it last night. So now I've got a fistfull of cash and plenty of time!!! __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker



Register or Log In To remove these advertisements.

10-14-2009, 12:06 AM	#17
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Pro Street C-10 is ROLLING!!! looks *****in. cant wait to see it done

10-14-2009, 12:08 AM	#18
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Pro Street C-10 is ROLLING!!! Sweet ride! I'm not to far from you. You will love the dropmember. I have one on my 70' with a slight rake and I think its killer!

10-24-2009, 01:06 AM	#19
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! I haven't made progress 'cause I was working on this..... http://67-72chevytrucks.com/vboard/s...d.php?t=328265 __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:25 PM	#20
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Uh oooooohhhhh........ Attached Images __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:28 PM	#21
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! I'm sure the 454 i'm building will work fine in something else __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:38 PM	#22
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Pro Street C-10 is ROLLING!!! LOL I had to look twice. I thought someone was telling me that my truck was rolling into the street or something. Congrats fellow tubber!!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

11-06-2009, 12:45 PM	#23
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! That's funny! __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 06:14 PM	#24
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Pro Street C-10 is ROLLING!!! Very nice truck! It will be sweet when it's done! Shoot, it's sweet as a roller! LOL __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-06-2009, 06:17 PM	#25
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: Pro Street C-10 is ROLLING!!! Tubs are cool................ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Register or Log In To remove these advertisements.