Check this out!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazntn · 02-04-2009, 10:34 PM

Saw this today!!!

http://www.gaugemagazine.com/2009/February/TechArticle/

stunna · 02-04-2009, 10:53 PM

good to see nate getting some publicity! I'm proud to say i own one!

**N2TRUX** · 02-07-2009, 08:23 PM

Cool, Nate gets another article Good thing since he got snubbed in the latest Classic Trucks.

pig rig · 02-07-2009, 08:30 PM

the more I read articals and see work done by nate I'm starting to think that nate might need to meet my truck and become freinds with my wallet

Sweet 85 C10 · 02-08-2009, 10:13 AM

Very Cool! I like the way they used the factory control arms!!!

gringoloco · 02-08-2009, 02:42 PM

Quote:

Originally Posted by blazntn

Saw this today!!!

http://www.gaugemagazine.com/2009/February/TechArticle/

Cool. So that's how you do that...

Quote:

Originally Posted by N2TRUX

Cool, Nate gets another article Good thing since he got snubbed in the latest Classic Trucks.

Details? I must have missed it...

**N2TRUX** · 02-08-2009, 10:18 PM

Quote:

Originally Posted by gringoloco

Cool. So that's how you do that...

Details? I must have missed it...

I "think" it was Classic Truck. but I was reading at the mag rack in Wal-Mart and didn't buy it. One of the recent truck mags had several companies showing their "Lowered Crossmembers"
and Porterbuilt was not in there. At least I didn't see it.

gringoloco · 02-09-2009, 12:29 AM

Aaahh yes... CCT- there was a similar design mentioned...

68 short step · 02-09-2009, 12:33 AM

the dropmember is hands down great quality, but are the other companies poor quality???
also i only knew of one other company selling a simular product, is there another???

gringoloco · 02-09-2009, 11:01 AM

Looks like the other stuff mentioned in the article is of good quality. There are parts from Scott's, Fatman, SD, ART, etc. I guess PB's PR didn't get the word out to that particular mag...

blazntn · 02-09-2009, 02:31 PM

I just want to say that Nate and his work is incredible. I am the one that did the install on Gauge Magazine. Nate worked with me well, he had an answer for everything. He was very patient with me and my sllllllooooowwww install!!!

I am sure that the other companies have qualtiy parts. But, there is no way they have the customer support that Nate offers.

I want to thank him for giving me the oportunity to do the story. This was my first tech article and I just hope I did it justice!!!

Thanks
Brad Walker

lowdownstar · 02-09-2009, 04:58 PM

I can tell you if Nathan can put up with me he can handle anyone! It was his way of doing business that got me to buy from him. His customer service is top notch and he really cares and loves what he does and that means alot today in my book. way to go Nathan

Ray

PBFAB.COM · 02-10-2009, 01:46 AM

Thanks for the link Brad! And thanks to all the others who have supported and purchased my products.

Sometimes with all the hats I wear certain things don't get the proper attention... I am suffering in the PR department these days!

There are plenty of similar products out there, and they all seem to be well built... but there's only ONE Porterbuilt! (Had to try some more PR there).

02-10-2009, 04:26 PM

well nate gets an a+ in my book. his customer support is top notch along with all of his products! good write up too blazntn. you do know nate that with more publicity and advertisement equals more products sold.....looks like you'll need to learn how to weld with your feet too!

SCOTI · 02-10-2009, 07:01 PM

Every time we try to do some PR work for you, we're accused of having a man crush

.

PBFAB.COM · 02-10-2009, 07:50 PM

Quote:

Originally Posted by SCOTI

Every time we try to do some PR work for you, we're accused of having a man crush

.

I was thinking about getting some T-shirts made that say something about a "man crush" and Porterbuilt Street Rods.... I thought it would be kind of funny.

lowdownstar · 02-10-2009, 10:17 PM

Nathan GET OUT OF THE SUN!!!!!! its messing with your head....

joe231 · 02-10-2009, 10:27 PM

Quote:

Originally Posted by porterbuilt

I was thinking about getting some T-shirts made that say something about a "man crush" and Porterbuilt Street Rods.... I thought it would be kind of funny.

that would be killer!!

SCOTI · 02-11-2009, 12:36 AM

Hhmmm . . ....

"You say man crush like it's a bad thing....."
Porterbuilt Streetrods

PBFAB.COM · 02-11-2009, 01:33 AM

Quote:

Originally Posted by SCOTI

Hhmmm . . ....

"You say man crush like it's a bad thing....."
Porterbuilt Streetrods

Maybe we could put that on our "Members Only" jackets.

02-04-2009, 10:34 PM	#1
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Check this out!!! Saw this today!!! http://www.gaugemagazine.com/2009/February/TechArticle/

02-04-2009, 10:53 PM	#2
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: Check this out!!! good to see nate getting some publicity! I'm proud to say i own one!

02-07-2009, 08:23 PM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Check this out!!! Cool, Nate gets another article Good thing since he got snubbed in the latest Classic Trucks. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-07-2009, 08:30 PM	#4
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: Check this out!!! the more I read articals and see work done by nate I'm starting to think that nate might need to meet my truck and become freinds with my wallet __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

02-08-2009, 10:13 AM	#5
Sweet 85 C10 OG Join Date: Sep 2007 Location: Orlando Florida Posts: 146	Re: Check this out!!! Very Cool! I like the way they used the factory control arms!!!

02-09-2009, 12:29 AM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Check this out!!! Aaahh yes... CCT- there was a similar design mentioned... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-09-2009, 12:33 AM	#9
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Check this out!!! the dropmember is hands down great quality, but are the other companies poor quality??? also i only knew of one other company selling a simular product, is there another???

02-09-2009, 11:01 AM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Check this out!!! Looks like the other stuff mentioned in the article is of good quality. There are parts from Scott's, Fatman, SD, ART, etc. I guess PB's PR didn't get the word out to that particular mag... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-09-2009, 02:31 PM	#11
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: Check this out!!! I just want to say that Nate and his work is incredible. I am the one that did the install on Gauge Magazine. Nate worked with me well, he had an answer for everything. He was very patient with me and my sllllllooooowwww install!!! I am sure that the other companies have qualtiy parts. But, there is no way they have the customer support that Nate offers. I want to thank him for giving me the oportunity to do the story. This was my first tech article and I just hope I did it justice!!! Thanks Brad Walker

02-09-2009, 04:58 PM	#12
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: Check this out!!! I can tell you if Nathan can put up with me he can handle anyone! It was his way of doing business that got me to buy from him. His customer service is top notch and he really cares and loves what he does and that means alot today in my book. way to go Nathan Ray

02-10-2009, 01:46 AM	#13
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Check this out!!! Thanks for the link Brad! And thanks to all the others who have supported and purchased my products. Sometimes with all the hats I wear certain things don't get the proper attention... I am suffering in the PR department these days! There are plenty of similar products out there, and they all seem to be well built... but there's only ONE Porterbuilt! (Had to try some more PR there). __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-10-2009, 04:26 PM	#14
sddwtcb Guest Posts: n/a	Re: Check this out!!! well nate gets an a+ in my book. his customer support is top notch along with all of his products! good write up too blazntn. you do know nate that with more publicity and advertisement equals more products sold.....looks like you'll need to learn how to weld with your feet too!

02-10-2009, 07:01 PM	#15
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Check this out!!! Every time we try to do some PR work for you, we're accused of having a man crush . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 02-10-2009 at 07:01 PM.

02-10-2009, 10:17 PM	#17
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: Check this out!!! Nathan GET OUT OF THE SUN!!!!!! its messing with your head.... Last edited by lowdownstar; 02-10-2009 at 10:17 PM.

02-11-2009, 12:36 AM	#19
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Check this out!!! Hhmmm . . .... "You say man crush like it's a bad thing....." Porterbuilt Streetrods __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 02-11-2009 at 12:36 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.