a lifted `62 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

michael bustamante · 02-06-2009, 06:13 PM

thought you guys might like to see a truck i'm re-wiring, the beds not on it but its a fleet longbed, Its got a 6" suspension lift on a `79 chevy 4x4 rolling chasis and a 3" body lift.

JTR · 02-06-2009, 06:33 PM

Quote:

Originally Posted by michael bustamante

thought you guys might like to see a truck i'm re-wiring, the beds not on it but its a fleet longbed, Its got a 6" suspension lift on a `79 chevy 4x4 rolling chasis and a 3" body lift.

got anymore pics? I would like to see how the front body mount was done? Looks like a good start.

michael bustamante · 02-06-2009, 07:14 PM

Quote:

Originally Posted by JTR

got anymore pics? I would like to see how the front body mount was done? Looks like a good start.

we had to custom make some body mount brackets and weld them to the frame using the stock locations in the cab and radiator support. ill try to get more pics tonight

62 short step · 02-06-2009, 11:55 PM

Looks good! Would like to see some more pics too!

66Gilbert · 02-07-2009, 12:19 AM

Hello from Arizona,

I too would like to see more and larger pics of this build. I can't believe how many 4x4 Builds of these years of trucks that have come up on this board in the last few weeks. It's Great!!! Have you been over to the 4x4 Forum and checked out the thread "Post Pics, Lets See How Many 4x4's Are out There". If you haven't go on over and check it out. Lots of neat 4x4's, stock and converted.

**Captainfab** · 02-08-2009, 01:05 AM

From past experience I would guess that the 3" body lift was the result of the custom mounts to fit the '62 body on the '79 frame.

michael bustamante · 02-09-2009, 11:13 AM

Quote:

Originally Posted by Captainfab

From past experience I would guess that the 3" body lift was the result of the custom mounts to fit the '62 body on the '79 frame.

tht is exactly right! we had to lift the body so that it could sit properly on the frame. when we tried lining up without the extended mounts, the body lines just werent lining up
sorry about the hang up on the pics, Ive been battling a flu and losing, but I`ll be going to my friends house tonight so i should get some pics then

1Bad62Pro/Street · 02-09-2009, 03:14 PM

Quote:

Originally Posted by michael bustamante

thought you guys might like to see a truck i'm re-wiring, the beds not on it but its a fleet longbed, Its got a 6" suspension lift on a `79 chevy 4x4 rolling chasis and a 3" body lift.

NICE!!!!!!!!!!!!!!!!!!!!

Joey~AP · 02-09-2009, 03:28 PM

Oh ya!

I had to make some spacers that are probably about the same as body lift spacers, for the front.

I'll have to get some pix.

michael bustamante · 02-10-2009, 11:52 AM

ok guys got more pics for ya, I tried to get some better pics of the frame mounts we fabbed

02-06-2009, 06:13 PM	#1
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	a lifted `62 project thought you guys might like to see a truck i'm re-wiring, the beds not on it but its a fleet longbed, Its got a 6" suspension lift on a `79 chevy 4x4 rolling chasis and a 3" body lift. Attached Images __________________ 1967custom

02-06-2009, 11:55 PM	#4
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: a lifted `62 project Looks good! Would like to see some more pics too! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

02-07-2009, 12:19 AM	#5
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: a lifted `62 project Hello from Arizona, I too would like to see more and larger pics of this build. I can't believe how many 4x4 Builds of these years of trucks that have come up on this board in the last few weeks. It's Great!!! Have you been over to the 4x4 Forum and checked out the thread "Post Pics, Lets See How Many 4x4's Are out There". If you haven't go on over and check it out. Lots of neat 4x4's, stock and converted.

02-08-2009, 01:05 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: a lifted `62 project From past experience I would guess that the 3" body lift was the result of the custom mounts to fit the '62 body on the '79 frame. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-09-2009, 03:28 PM	#9
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: a lifted `62 project Oh ya! I had to make some spacers that are probably about the same as body lift spacers, for the front. I'll have to get some pix. __________________ Build in progress for son's first truck.

02-10-2009, 11:52 AM	#10
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: a lifted `62 project ok guys got more pics for ya, I tried to get some better pics of the frame mounts we fabbed Attached Images __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.