Free To Good Home

[jholley]

I have a 68 SWB frame sitting on my trailer that I have to get rid of somehow or another. Before everyone starts foaming at the mouth let me describe it a little.

I was going to use this frame on my project but changed direction some. The left rear frame rail has been cut for a c-notch but the notch isn't installed yet. The center crossmember has been removed. The crossmember where the rear shocks mount has been removed. The rear crossmember has been removed. Essentially, what is left is the front crossmember and the frame rails.

This would work out good for someone who is considering chopping a LWB into a SWB and c-notching it. You can just swap the stuff that is missing from this over from yours or get a drop center crossmember and a rear to bolt in it.

Like I said, its free, just come pick it up. I need to have it gone in the next two weeks.

I can get pics if needed.

[clos69]

That's a heck of deal Jim...i wish i had something to haul it with or else I would be knocking at your front door...are you going to sell the c-notch? lmk thanks,Carlos

[jholley]

I used the c-notch on my other frame. The frame isn't coming with a c-notch, only cut and ready to accept one that the future owner must purchase.

[Spray-Bomb]

How deep is the notch in the frame & do you have the piece you cut out ???

[jholley]

Just deep enough for a set of McGaughy's notches. Unfortunately I don't have the peice I cut out.

[Spray-Bomb]

I will take it

Can I get a phone number to reach you at & work out the fine details ???

Matt