Parting out 77 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10stepside · 12-11-2002, 12:24 AM

Hey guys, I have a 77 blazer that i am going to part out.. I am keeping everything other then the body and interior components. Name what you want, and I can pm or email you back on if i have it.. I will ship anything, just might take me a while to get it ready. Start naming parts, and I'll start saying prices or if its worth messing with. Thanks

69c10stepside · 12-11-2002, 12:30 AM

Title is in on this too.. clean title

**old Rusty C10** · 12-11-2002, 10:50 AM

how about a stock am/fm radio???

Tom · 12-11-2002, 01:19 PM

I need both front fenders, and the lower valence panel if its the same [should be, its the metal strip that runs below the radiator and is behind the bumper]
How much would you like for them?

BigRed · 12-11-2002, 02:25 PM

Got a good dash pad for it? If so, what color and how much?

69c10stepside · 12-11-2002, 04:39 PM

Sorry, factory radio is long gone.

I will take some pictures tomorrow of the fenders and the lower valance panel and let you set the price.. shipping is probably going to be the kicker on that.

And the dash panel is in excellent condition, there is a slight *SLIGHT* crack, the color would be the light brown.. dont know the exact color, but I will get some pictures of it tomorrow also.

For the list of some of the other things that are in this, I have a tilt column, instrument cluster (clock non working), leather bucket seats with matching rear seat (kinda dirty, they are the light brow color no tears etc), a functional rear tail gate with the window that rolls up and down right. I also have some parts off of a '91 suburban.. rear doors etc. Any more things needed just list them, and I will have pictures of what are requested for as of right now tomorrow. Thanks

69c10stepside · 12-12-2002, 03:56 PM

Pass fender is alot worse then i remember .. could be worked but dont know if it is worth the time compared to just finding another one

69c10stepside · 12-12-2002, 03:57 PM

second pass fender pic

69c10stepside · 12-12-2002, 03:57 PM

valance pic

69c10stepside · 12-12-2002, 03:58 PM

valance pic 2

69c10stepside · 12-12-2002, 04:00 PM

driver fender

69c10stepside · 12-12-2002, 04:01 PM

driver fender 2 notice spot by fender lip and the bottom where holes have been drilled for running boards at some point in time

69c10stepside · 12-12-2002, 04:02 PM

bucket seat pic 1

69c10stepside · 12-12-2002, 04:03 PM

bucket seat 2 sliders work perfectly no rips or tears etc in these seats for where i could notice them

69c10stepside · 12-12-2002, 04:04 PM

passenger bucket seat has the fold up for passengers can get in and out of the back

69c10stepside · 12-12-2002, 04:05 PM

.

69c10stepside · 12-12-2002, 04:06 PM

pic 1 of dash

69c10stepside · 12-12-2002, 04:07 PM

highlighted area is the crack, the other spot on the dash is just a dirty spot.

69c10stepside · 12-12-2002, 04:08 PM

driver side dash notice the column tilt cruise

its a very tight column, all it needs is an ignition switch, i have one just dont know where i put it.

69c10stepside · 12-12-2002, 04:33 PM

on the '90 sub parts, i have the second two sets of doors, electric windows, door locks, grey interior the barn doors, a nice factory chrome bumper with the molding on it, radiator support and a grey cloth third seat. if interested an any of this, let me know i will get some pics up of those parts also.

Tom · 12-12-2002, 04:46 PM

passenger side is almost as bad as what I have right now, but I am still interested in the drivers side panel and valance panel. They would have to be shiped to phoenix AZ 85203
What is an acceptable price?

BigRed · 12-12-2002, 04:49 PM

How much do you want for the dash pad with shipping?

69c10stepside · 12-12-2002, 04:56 PM

On the drivers fender and the valance, make me an offer

Same as with the dash pad

anything reasonable wont be turned down.. If it isnt what I think its worth, ill just reply with a +$ and we can go from there

Frank

69c10stepside · 12-12-2002, 04:57 PM

and on the shipping part of this, I will more then likely be shipping via fedex ground on what i can send out. I shipped out a door out a few months ago with it and it cost me i believe 65 bucks, it took a while, but you know

*67/72junkie* · 12-12-2002, 07:25 PM

PM price for seats I'll pay shipping.

12-11-2002, 12:24 AM	#1
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Parting out 77 Blazer Hey guys, I have a 77 blazer that i am going to part out.. I am keeping everything other then the body and interior components. Name what you want, and I can pm or email you back on if i have it.. I will ship anything, just might take me a while to get it ready. Start naming parts, and I'll start saying prices or if its worth messing with. Thanks

12-11-2002, 10:50 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,312	parts how about a stock am/fm radio??? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-11-2002, 01:19 PM	#4
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	I need both front fenders, and the lower valence panel if its the same [should be, its the metal strip that runs below the radiator and is behind the bumper] How much would you like for them? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

12-11-2002, 02:25 PM	#5
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Got a good dash pad for it? If so, what color and how much? __________________ Scott Shelbourne

12-12-2002, 03:56 PM	#7
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Pass fender is alot worse then i remember .. could be worked but dont know if it is worth the time compared to just finding another one Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-11-2002, 12:30 AM	#2
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Title is in on this too.. clean title

12-11-2002, 04:39 PM	#6
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Sorry, factory radio is long gone. I will take some pictures tomorrow of the fenders and the lower valance panel and let you set the price.. shipping is probably going to be the kicker on that. And the dash panel is in excellent condition, there is a slight SLIGHT crack, the color would be the light brown.. dont know the exact color, but I will get some pictures of it tomorrow also. For the list of some of the other things that are in this, I have a tilt column, instrument cluster (clock non working), leather bucket seats with matching rear seat (kinda dirty, they are the light brow color no tears etc), a functional rear tail gate with the window that rolls up and down right. I also have some parts off of a '91 suburban.. rear doors etc. Any more things needed just list them, and I will have pictures of what are requested for as of right now tomorrow. Thanks

12-12-2002, 03:57 PM	#8
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	second pass fender pic Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 03:57 PM	#9
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	valance pic Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 03:58 PM	#10
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	valance pic 2 Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:00 PM	#11
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	driver fender Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:01 PM	#12
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	driver fender 2 notice spot by fender lip and the bottom where holes have been drilled for running boards at some point in time Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:02 PM	#13
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	bucket seat pic 1 Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:03 PM	#14
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	bucket seat 2 sliders work perfectly no rips or tears etc in these seats for where i could notice them Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:04 PM	#15
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	passenger bucket seat has the fold up for passengers can get in and out of the back Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.



Register or Log In To remove these advertisements.

12-12-2002, 04:05 PM	#16
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	. Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:06 PM	#17
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	pic 1 of dash Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:07 PM	#18
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	highlighted area is the crack, the other spot on the dash is just a dirty spot. Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:08 PM	#19
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	driver side dash notice the column tilt cruise its a very tight column, all it needs is an ignition switch, i have one just dont know where i put it. Last edited by 69c10stepside; 03-23-2010 at 11:04 AM.

12-12-2002, 04:33 PM	#20
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	on the '90 sub parts, i have the second two sets of doors, electric windows, door locks, grey interior the barn doors, a nice factory chrome bumper with the molding on it, radiator support and a grey cloth third seat. if interested an any of this, let me know i will get some pics up of those parts also.

12-12-2002, 04:46 PM	#21
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	passenger side is almost as bad as what I have right now, but I am still interested in the drivers side panel and valance panel. They would have to be shiped to phoenix AZ 85203 What is an acceptable price? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

12-12-2002, 04:49 PM	#22
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	How much do you want for the dash pad with shipping? __________________ Scott Shelbourne

12-12-2002, 04:56 PM	#23
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	On the drivers fender and the valance, make me an offer Same as with the dash pad anything reasonable wont be turned down.. If it isnt what I think its worth, ill just reply with a +$ and we can go from there Frank

12-12-2002, 04:57 PM	#24
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	and on the shipping part of this, I will more then likely be shipping via fedex ground on what i can send out. I shipped out a door out a few months ago with it and it cost me i believe 65 bucks, it took a while, but you know

12-12-2002, 07:25 PM	#25
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Seats PM price for seats I'll pay shipping.

Register or Log In To remove these advertisements.