454 long block [stock]...<20k miles? DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gray Ghost · 02-10-2009, 04:03 PM

My friend pulled this out of a motorhome to settle a debt the owner had with him...he also got the TH400 listed elsewhere. I got it on a trade deal for building his deck and staining it.

My friend is a local certified ASE mechanic and he drove the motorhome to the shop to remove the motor. The odo said 19.5k when he parked it. Not completely sure of the mileage, but looking at the heads and valley the motor is a very clean one! He told me that it's likely this is a survivor that has never even been worked on. The original oil cooler is still intact but will need to be replaced. The oil filter and fuel pump are there as well.

The codes for the motor are:
14015445 block & 346236 heads...here's the description from Mortec...

14015445...454.......78-90...2 or 4 bolt
346236.....75-87...oval...OPEN...454, 120cc chamber, 225/116cc ports

I will send the engine stand with it at no charge for a local sale or shipped. Shipping will run $225-250 in the US terminal to terminal.

I am asking $600 cash for the long block as pictured.

Gray Ghost · 02-11-2009, 08:01 PM

ttt

Gray Ghost · 02-13-2009, 01:12 AM

Found out tonite the fuel pump is cracked but it does have a good automatic flexplate on it. Drained the oil and pulled the pan. Not a thing in the oil and the bottom end is spotless. It's a two bolt main motor.

Gray Ghost · 02-13-2009, 08:58 PM

Sold pending trade with M6Z...

02-10-2009, 04:03 PM	#1
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	454 long block [stock]...<20k miles? DFW My friend pulled this out of a motorhome to settle a debt the owner had with him...he also got the TH400 listed elsewhere. I got it on a trade deal for building his deck and staining it. My friend is a local certified ASE mechanic and he drove the motorhome to the shop to remove the motor. The odo said 19.5k when he parked it. Not completely sure of the mileage, but looking at the heads and valley the motor is a very clean one! He told me that it's likely this is a survivor that has never even been worked on. The original oil cooler is still intact but will need to be replaced. The oil filter and fuel pump are there as well. The codes for the motor are: 14015445 block & 346236 heads...here's the description from Mortec... 14015445...454.......78-90...2 or 4 bolt 346236.....75-87...oval...OPEN...454, 120cc chamber, 225/116cc ports I will send the engine stand with it at no charge for a local sale or shipped. Shipping will run $225-250 in the US terminal to terminal. I am asking $600 cash for the long block as pictured. Attached Images __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. Last edited by Gray Ghost; 02-10-2009 at 04:05 PM.

02-11-2009, 08:01 PM	#2
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 454 long block [stock]...<20k miles? DFW ttt __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

02-13-2009, 01:12 AM	#3
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 454 long block [stock]...<20k miles? DFW Found out tonite the fuel pump is cracked but it does have a good automatic flexplate on it. Drained the oil and pulled the pan. Not a thing in the oil and the bottom end is spotless. It's a two bolt main motor. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. Last edited by Gray Ghost; 02-13-2009 at 01:13 AM.

02-13-2009, 08:58 PM	#4
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 454 long block [stock]...<20k miles? DFW Sold pending trade with M6Z... __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.