Rally wheel trim rings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Orange71shorty** · 02-26-2009, 05:27 PM

Could someone please tell me where to get the correct trim rings for 5 on5 rallys 8" wide? Thanks

67_C-30 · 02-26-2009, 06:34 PM

Welcome to the board!

I don't know about the correct ones, because actually Rallys never came from the factory on this year truck, but I think you could pick up the style that did come on the '73 - up trucks on ebay. I bought a set a few years back that were the ropunded style that came on them from someone on ebay (can't remember the seller). This time around on my red '69, I went with the wide 3" rings that came on 8" Corvette Rallys. I love the look of them.

Sinister · 02-26-2009, 06:37 PM

Don't know if they're "correct" but Hubcap Mike's has trim rings.
http://www.hubcapmike.com/trim-rings-beauty-rings.html
Here's some on my steelies.

**Orange71shorty** · 02-26-2009, 10:26 PM

Hey 67 C30 good lookin' ride what drop do you have? I picked up a set of the 3" deep rings too but I was worried it might hide the little slots too much but it looks good on your truck.Thanks for the replys

67_C-30 · 02-26-2009, 10:48 PM

Thanks! It has McGaughy 2/4 drop springs on it. This pic is a little misleading because I have (10) 40 lb bags of vermiculite on it, so it actually sits about 3/4" - 1" higher in the rear. Its still pretty close though. Below a pic without the weight. I'm running 245/60 R15's in the front and 275/60 R15's in rear, so that is also helping the front look a little lower. I think I'm gonna drop it another inch in the rear to make it look like the loaded pic, and call it good!

9teen69 · 02-26-2009, 10:48 PM

Bought some a year ago from a company selling on eBay located in Colorado. I called them and ordered over the phone - I can't remember their name - I'll try and locate for you. They are polished stainless.

9teen69 · 02-26-2009, 11:17 PM

Found them. Rocky Mountain Wheel. Toll Free 1-800-355-9280 Here is one of their listings.
They fit and look great - all metal. I was concerned because they were so cheap so I called and asked a few questions, shipped quick.

**Orange71shorty** · 02-26-2009, 11:25 PM

Thanks 9teen69. Those look good I will check them out

Brad · 02-27-2009, 08:44 PM

I have a set of trim rings exactly like 9teen69 has in his picture. I got them off an Astro van.

02-26-2009, 05:27 PM	#1
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 571	Rally wheel trim rings Could someone please tell me where to get the correct trim rings for 5 on5 rallys 8" wide? Thanks

02-26-2009, 06:34 PM	#2
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Rally wheel trim rings Welcome to the board! I don't know about the correct ones, because actually Rallys never came from the factory on this year truck, but I think you could pick up the style that did come on the '73 - up trucks on ebay. I bought a set a few years back that were the ropunded style that came on them from someone on ebay (can't remember the seller). This time around on my red '69, I went with the wide 3" rings that came on 8" Corvette Rallys. I love the look of them. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

02-26-2009, 06:37 PM	#3
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Rally wheel trim rings Don't know if they're "correct" but Hubcap Mike's has trim rings. http://www.hubcapmike.com/trim-rings-beauty-rings.html Here's some on my steelies. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 02-26-2009 at 06:40 PM.

02-26-2009, 10:26 PM	#4
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 571	Re: Rally wheel trim rings Hey 67 C30 good lookin' ride what drop do you have? I picked up a set of the 3" deep rings too but I was worried it might hide the little slots too much but it looks good on your truck.Thanks for the replys

02-26-2009, 10:48 PM	#5
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Rally wheel trim rings Thanks! It has McGaughy 2/4 drop springs on it. This pic is a little misleading because I have (10) 40 lb bags of vermiculite on it, so it actually sits about 3/4" - 1" higher in the rear. Its still pretty close though. Below a pic without the weight. I'm running 245/60 R15's in the front and 275/60 R15's in rear, so that is also helping the front look a little lower. I think I'm gonna drop it another inch in the rear to make it look like the loaded pic, and call it good! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 02-26-2009 at 10:48 PM.

02-26-2009, 10:48 PM	#6
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Rally wheel trim rings Bought some a year ago from a company selling on eBay located in Colorado. I called them and ordered over the phone - I can't remember their name - I'll try and locate for you. They are polished stainless. Attached Images __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-26-2009, 11:17 PM	#7
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Rally wheel trim rings Found them. Rocky Mountain Wheel. Toll Free 1-800-355-9280 Here is one of their listings. They fit and look great - all metal. I was concerned because they were so cheap so I called and asked a few questions, shipped quick. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-26-2009, 11:25 PM	#8
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 571	Re: Rally wheel trim rings Thanks 9teen69. Those look good I will check them out

02-27-2009, 08:44 PM	#9
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Rally wheel trim rings I have a set of trim rings exactly like 9teen69 has in his picture. I got them off an Astro van. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.