FS:NOS/Refurbished Factory Cruise Control Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wugunguy · 03-01-2009, 05:23 PM

Well, I just found out Friday that my job isn't completely recession proof. My boss has been doing closed door meetings with everyone and he told me that things aren't looking too great right now and the future is uncertain. I am the most recent hire and would probably be the first to go if it comes to that.

With that said, I have decided to sell off some of my parts stash in case I do get the word.

First off, I am listing my last cruise control setup that I have. I purchased this from GMCPaul back in July 2007. I have not installed or altered anything-it is as I bought it. I am no expert on these cruise setups and can only provide the information that GMCPaul gave me-which I have absolutely no reason to question.

Here is the thread I purchased it from:

http://67-72chevytrucks.com/vboard/s...d.php?t=198920

Picture I took:

Asking $600 SHIPPED OBO

KrashMan454 · 03-01-2009, 05:35 PM

Will you take $500.00 shipped?

wugunguy · 03-01-2009, 06:23 PM

pm sent with contact info

72BlckButy · 03-01-2009, 08:25 PM

OMG.... you are killing me here P_ _ _!

bump for ya!

wugunguy · 03-01-2009, 08:37 PM

These are Sold Pending Funds to KrashMan454.

72blckbuty--hey Nate, LOL, I didn't want to sell too bad, but I'm just so uncertain about my job right now and could use the $$ if I get the boot. LOL

72BlckButy · 03-01-2009, 08:56 PM

I'm glad to hear that they are "sold" and I want to wish you the best with your employment situation. Hang in there!

**72 Super** · 03-01-2009, 09:10 PM

That is a nice set up, I remember seeing the add when GMCPaul had it. You have some nice parts for sale.I wish you the best with your job situation hope everything works out for you.

wugunguy · 03-01-2009, 10:24 PM

Nate-thanks for the kind words-I hope I'm jumping the gun on my job, but I'd rather sell now and have a little $$ in my pocket if I do get laid off instead of having to make a mad rush to sell off should I get laid off.

72 Super-That's the reason I bought the setup-it looked great and was from a great vendor. Again, I hope I end up selling these for no reason, but just want to play it safe now should something happen. Thanks for the kind words.

**jerry moss** · 03-01-2009, 10:30 PM

sorry to hear about your job situation, hope it all works out for you. i understand completely what you're going through, i've been empolyed 24+ years at the same muffler shop-3 different owners in that time- but my current employer bought the business when real estate prices were at the peak and the economy was doing good. now that the economy is in the toilet and the state screwed up everything related to cat converters, we are barely surviving. my last paycheck was for 20 hours instead of 40--that hurts badly when the bills are still at full price.

03-01-2009, 05:23 PM	#1
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	FS:NOS/Refurbished Factory Cruise Control Setup Well, I just found out Friday that my job isn't completely recession proof. My boss has been doing closed door meetings with everyone and he told me that things aren't looking too great right now and the future is uncertain. I am the most recent hire and would probably be the first to go if it comes to that. With that said, I have decided to sell off some of my parts stash in case I do get the word. First off, I am listing my last cruise control setup that I have. I purchased this from GMCPaul back in July 2007. I have not installed or altered anything-it is as I bought it. I am no expert on these cruise setups and can only provide the information that GMCPaul gave me-which I have absolutely no reason to question. Here is the thread I purchased it from: http://67-72chevytrucks.com/vboard/s...d.php?t=198920 Picture I took: Asking $600 SHIPPED OBO __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project Last edited by wugunguy; 03-01-2009 at 05:28 PM.

03-01-2009, 05:35 PM	#2
KrashMan454 Registered User Join Date: Jan 2009 Location: Terry, Mississippi. Posts: 225	Re: FS:NOS/Refurbished Factory Cruise Control Setup Will you take $500.00 shipped?

03-01-2009, 06:23 PM	#3
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	Re: FS:NOS/Refurbished Factory Cruise Control Setup pm sent with contact info __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

03-01-2009, 08:25 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: FS:NOS/Refurbished Factory Cruise Control Setup OMG.... you are killing me here P_ _ _! bump for ya! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 03-01-2009 at 08:25 PM.

03-01-2009, 08:37 PM	#5
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	Re: FS:NOS/Refurbished Factory Cruise Control Setup These are Sold Pending Funds to KrashMan454. 72blckbuty--hey Nate, LOL, I didn't want to sell too bad, but I'm just so uncertain about my job right now and could use the $$ if I get the boot. LOL __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

03-01-2009, 08:56 PM	#6
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: FS:NOS/Refurbished Factory Cruise Control Setup I'm glad to hear that they are "sold" and I want to wish you the best with your employment situation. Hang in there! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 03-01-2009 at 08:57 PM.

03-01-2009, 09:10 PM	#7
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: FS:NOS/Refurbished Factory Cruise Control Setup That is a nice set up, I remember seeing the add when GMCPaul had it. You have some nice parts for sale.I wish you the best with your job situation hope everything works out for you. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

03-01-2009, 10:24 PM	#8
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	Re: FS:NOS/Refurbished Factory Cruise Control Setup Nate-thanks for the kind words-I hope I'm jumping the gun on my job, but I'd rather sell now and have a little $$ in my pocket if I do get laid off instead of having to make a mad rush to sell off should I get laid off. 72 Super-That's the reason I bought the setup-it looked great and was from a great vendor. Again, I hope I end up selling these for no reason, but just want to play it safe now should something happen. Thanks for the kind words. __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

03-01-2009, 10:30 PM	#9
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Re: FS:NOS/Refurbished Factory Cruise Control Setup sorry to hear about your job situation, hope it all works out for you. i understand completely what you're going through, i've been empolyed 24+ years at the same muffler shop-3 different owners in that time- but my current employer bought the business when real estate prices were at the peak and the economy was doing good. now that the economy is in the toilet and the state screwed up everything related to cat converters, we are barely surviving. my last paycheck was for 20 hours instead of 40--that hurts badly when the bills are still at full price. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.