BBC Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 03-01-2009, 09:50 PM

I have a virgin bore 396 2 bolt block from a 66 Impala SS396.

Has surface rust from sitting in my shed but nothing that wont clean up easily. I hit one cyl with the hone and all surface rust came right off easily. Block has all main caps.

Also have a set of rods, and Closed chamber, 96cc BBC heads without valves.
Casting numbers on the block and heads are,

3855961 on the block

3872702 and 3904390 on the heads

Heads are from a 66 427

I was told by two machine shops that this block had enough material to bore to a 427 as GM used the same block for the 396 and 427 in 66.

I also have new lifters, timing chain, oil pump and bearings that go with it.

Asking $600 for everything but dont be afraid to make offers.
LMK if my price is out of line.

will trade for multiple things as I need alot of stuff for my project. Just let me know what you are wanting to trade.

Thanks --Josh
__________________

STOCKISH · 03-02-2009, 11:30 AM

You might be suprised what I'd take for this stuff. Need wood bed parts, rust free fenders, doors, etc...

STOCKISH · 03-03-2009, 10:02 PM

Back up top.

STOCKISH · 03-05-2009, 08:42 PM

Any trades???

**thelonerife** · 03-05-2009, 09:50 PM

any pics?

STOCKISH · 03-05-2009, 09:58 PM

I will try to get some tomorrow.

STOCKISH · 03-11-2009, 10:38 AM

$300 for everything, picked up. Sorry, no pics.

70rs/ss · 03-11-2009, 01:14 PM

If you weren't in NC I'd take it!! Will you split up some stuff? Like the heads?

STOCKISH · 03-11-2009, 03:25 PM

Sure. Unfortunately the heads are the most valuable part of this set-up. Would like to sell together but will seperate. Looking to trade something? Thanks

bad421 · 03-12-2009, 01:26 AM

does it have a crank with it? also what are you looking for a trade? LMK thanks

STOCKISH · 03-12-2009, 09:16 AM

bad421, returned your pm.

70rs/ss · 03-12-2009, 12:45 PM

It is worth it as a complete engine, I just can't afford to ship it all! The heads will only be able $30 shipped so I may just do that unless you come from NC to AZ to buy some rust free sheetmetal?!

STOCKISH · 03-12-2009, 02:37 PM

I'd love to get out there but it'll probably not be for a long while. Feel free to make an offer on the heads.

*Retro68* · 03-12-2009, 04:34 PM

Where are you at with these parts. Please tell me what you have available. I am very interested. Thanks Scott

STOCKISH · 03-12-2009, 05:40 PM

All parts are in Wake Forest NC Everything I have is listed in first post. Block, bare heads, rods, lifters, timing chain, oil pump, oil pan, etc. plus whatever wlse I can find for it. I dont know the best way to ship something so heavy. Would probably be expensive. Would love to trade parts or sell outright, what do you have in mind?

*Retro68* · 03-13-2009, 11:42 AM

Can you PM me your phone number or call me at 480-570-8468 Thanks Scott

STOCKISH · 03-13-2009, 12:17 PM

PM sent

bad421 · 03-13-2009, 12:35 PM

going to pass on a good deal

STOCKISH · 03-13-2009, 12:41 PM

Pending to Retro68

STOCKISH · 03-25-2009, 09:27 AM

Back to the top.

03-01-2009, 09:50 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	BBC Parts I have a virgin bore 396 2 bolt block from a 66 Impala SS396. Has surface rust from sitting in my shed but nothing that wont clean up easily. I hit one cyl with the hone and all surface rust came right off easily. Block has all main caps. Also have a set of rods, and Closed chamber, 96cc BBC heads without valves. Casting numbers on the block and heads are, 3855961 on the block 3872702 and 3904390 on the heads Heads are from a 66 427 I was told by two machine shops that this block had enough material to bore to a 427 as GM used the same block for the 396 and 427 in 66. I also have new lifters, timing chain, oil pump and bearings that go with it. Asking $600 for everything but dont be afraid to make offers. LMK if my price is out of line. will trade for multiple things as I need alot of stuff for my project. Just let me know what you are wanting to trade. Thanks --Josh __________________ __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-02-2009, 11:30 AM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts You might be suprised what I'd take for this stuff. Need wood bed parts, rust free fenders, doors, etc... __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-03-2009, 10:02 PM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts Back up top. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-05-2009, 08:42 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts Any trades??? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-05-2009, 09:50 PM	#5
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: BBC Parts any pics? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-05-2009, 09:58 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts I will try to get some tomorrow. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-11-2009, 10:38 AM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts $300 for everything, picked up. Sorry, no pics. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-11-2009, 01:14 PM	#8
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: BBC Parts If you weren't in NC I'd take it!! Will you split up some stuff? Like the heads?

03-11-2009, 03:25 PM	#9
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts Sure. Unfortunately the heads are the most valuable part of this set-up. Would like to sell together but will seperate. Looking to trade something? Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-12-2009, 01:26 AM	#10
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: BBC Parts does it have a crank with it? also what are you looking for a trade? LMK thanks __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

03-12-2009, 09:16 AM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts bad421, returned your pm. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-12-2009, 12:45 PM	#12
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: BBC Parts It is worth it as a complete engine, I just can't afford to ship it all! The heads will only be able $30 shipped so I may just do that unless you come from NC to AZ to buy some rust free sheetmetal?!

03-12-2009, 02:37 PM	#13
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts I'd love to get out there but it'll probably not be for a long while. Feel free to make an offer on the heads. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-12-2009, 04:34 PM	#14
Retro68 Account Suspended Join Date: Jul 2006 Location: Mesa Arizona Posts: 294	Re: BBC Parts Where are you at with these parts. Please tell me what you have available. I am very interested. Thanks Scott

03-12-2009, 05:40 PM	#15
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts All parts are in Wake Forest NC Everything I have is listed in first post. Block, bare heads, rods, lifters, timing chain, oil pump, oil pan, etc. plus whatever wlse I can find for it. I dont know the best way to ship something so heavy. Would probably be expensive. Would love to trade parts or sell outright, what do you have in mind? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

03-13-2009, 11:42 AM	#16
Retro68 Account Suspended Join Date: Jul 2006 Location: Mesa Arizona Posts: 294	Re: BBC Parts Can you PM me your phone number or call me at 480-570-8468 Thanks Scott

03-13-2009, 12:17 PM	#17
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts PM sent __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 03-13-2009 at 12:17 PM.

03-13-2009, 12:35 PM	#18
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: BBC Parts going to pass on a good deal __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

03-13-2009, 12:41 PM	#19
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts Pending to Retro68 __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-25-2009, 09:27 AM	#20
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: BBC Parts Back to the top. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.