Accelerator Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richard Dobson · 03-02-2009, 09:39 AM

I am putting a 396 into my 71 C10 which had a 250 6cyl in it. Could I get pictures of how my Edlebrock carb needs to be set up linkage wise.

fastom · 03-02-2009, 10:24 PM

Why not replace it with a cable setup?

Longhorn Man · 03-02-2009, 11:01 PM

a 71 does have a cable set up

Richard Dobson · 03-03-2009, 01:34 PM

Yeah, I have the cable linkage, I was wanting pictures of how the cable would go to the carb. Is there a Locar setup or does someone have pictures of you setup?

Longhorn Man · 03-03-2009, 05:01 PM

i may be goin to my shop this evening, if so, I'll get a shot of the one on the burb. it's a big block with a quadra jet, but it may give you an idea

Richard Dobson · 03-04-2009, 12:53 PM

Thanks Longhorn Man

**VetteVet** · 03-04-2009, 01:12 PM

Here's a pic. The carb don't really matter much, the cables are pretty much the same. The brackets will vary tho.

Longhorn Man · 03-04-2009, 05:09 PM

dude, I forgot all about this when i went out there last night.

03-02-2009, 09:39 AM	#1
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Accelerator Linkage I am putting a 396 into my 71 C10 which had a 250 6cyl in it. Could I get pictures of how my Edlebrock carb needs to be set up linkage wise. __________________ Richard Dobson

03-02-2009, 10:24 PM	#2
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Accelerator Linkage Why not replace it with a cable setup?

03-02-2009, 11:01 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Accelerator Linkage a 71 does have a cable set up

03-03-2009, 01:34 PM	#4
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Re: Accelerator Linkage Yeah, I have the cable linkage, I was wanting pictures of how the cable would go to the carb. Is there a Locar setup or does someone have pictures of you setup? __________________ Richard Dobson

03-03-2009, 05:01 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Accelerator Linkage i may be goin to my shop this evening, if so, I'll get a shot of the one on the burb. it's a big block with a quadra jet, but it may give you an idea

03-04-2009, 12:53 PM	#6
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Re: Accelerator Linkage Thanks Longhorn Man __________________ Richard Dobson

03-04-2009, 01:12 PM	#7
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,719	Re: Accelerator Linkage Here's a pic. The carb don't really matter much, the cables are pretty much the same. The brackets will vary tho. Attached Images __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

03-04-2009, 05:09 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Accelerator Linkage dude, I forgot all about this when i went out there last night.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.