'00 Painted Interior Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pimpeterbilt · 03-05-2009, 11:33 PM

I've been in the works of painting a dash for a kid that I know. The pickup is a 2000 ECSB Silverado. Of the interior pieces, this is all that will be painted...

-Lower half of the dash: Glove box, fuse cover/end panels, dr. side knee bolster/panel, cigarette lighter cover, ash try cover and the middle piece in the center console with the flip up lid.
-Surrounds on the pass. side air vents
-Inner areas of the gauge bezel
-Door Panels: Speaker grilles, window switches, and door handle trim
-A pillar covers

The kid rides motorcycles and I have came up with a design/logo that will have his bike number and last name. That will be airbrushed on the A pillar covers and also will be airbrushing some ghost flames on the dash and door pieces.

Also sold him my rear bucket seat and fiberglass speaker box along with my two JL Audio W1s and amp. The speaker box has already been repainted, did it a two tone with the color we are using and a SEM dye the same color as the interior. That is already installed and painted. Also I am painting my old Trenz billet dash trim that will be painted to match also.

Heres some previous pictures and pictures of some of the dash that I was working on tonight...

First off the paint that is being used for everything

Wetsanding the speaker box

Sanding on the knee bolster piece. Starting off with 120 grit.

All sanded with 120.

Gone over with 180.

Got the glove box apart and other pieces sanded tonight

Everything is all sanded down and ready for primer except the glove box and lower dash piece pictured in the last picture. More pics to come as thing project continues. Hope to have it done by the next weekend.

gmcracing92 · 03-06-2009, 10:26 AM

that looks great! i started trying to do some of that myself, starting with some of the under the hood plastics like fuse box cover and the engine covers on my 6.0. u have great patients because i thought it was too time consuming, and then my new air compressor broke. but all that looks good and keep us updated with ur progress.

pimpeterbilt · 03-11-2009, 03:22 PM

I got the glove box and surrounding panel sanded last night. Just need to do some final sanding on those pieces and a couple others. Gonna mask up some all the pieces and starting slingin' primer tonight. Next, start wetsanding the primer these next couple nights and start spraying color and airbrushing this weekend hopefully.

pimpeterbilt · 03-12-2009, 11:02 PM

Got everything primed last night. Tonight I started wetsanding with #400, finish with some #600. Some of the pieces are going to have to be sprayed with primer again...in which I am out of

Due to the delay of no primer and having to prime some pieces a second time, color will have to wait a couple days.

All wiped down ready to be shot

A pillars primed

Wetsanding tonight

gmcracing92 · 03-13-2009, 10:00 PM

lookin good man, lookin good.cant wait to see the finished product.

pimpeterbilt · 03-14-2009, 12:04 AM

Thanks.

pimpeterbilt · 03-15-2009, 03:13 PM

Update: Everything is all wetsanded as of yesterday. Tonight color will start flying as well as the airbrusing I plan on doing. Lots of pics to follow.

pimpeterbilt · 03-16-2009, 12:59 PM

Heres the painted pictures. Last night I had problems when I started out to do the airbrushing/artwork on the A pillars. I sprayed a coat of white with my mini jet gun and ended up with a small run and fish eyes. So it will be sanded down and start again on it either tonight or real soon. Otherwise I got done last night around midnight.

Everything wiped down ready for sealer.

Note the little stand I made for painting/airbrushing the A pillars.

First coat of base.

Me spraying the clear.

Done and cleared.

OARNGESI · 03-17-2009, 03:53 PM

that stuff looks great cant wait to see it installed

pimpeterbilt · 03-21-2009, 01:56 PM

Got the airbrushing on the A pillars done last night. Was up until 3:30 this morning doing these.

bowtieboy93 · 03-22-2009, 02:34 AM

wow looks good
cant wait to see it installed

Real_McCoy · 04-10-2009, 12:48 PM

This looks great. Where are you at on installation? Pics?

67ChevyRedneck · 04-10-2009, 01:24 PM

Wow, that's going to look great!

I love the flames on the glovebox!

cmart · 04-10-2009, 02:25 PM

Wow! Very nice work. Hurry up and put more pictures on here! Got us hooked now. HA!

Looking great!

pimpeterbilt · 04-10-2009, 03:32 PM

Thanks for the comments guys.

Quote:

Originally Posted by Real_McCoy

This looks great. Where are you at on installation? Pics?

All the pieces are in boxes and are out of the shop. Waiting on the money for everything (dash, subs, box, seats) from the kid I did this work for. Told him he's not getting his dash back until I was paid in full for everything, he thought differently. I've had quite a 'run-a-around' with this kid. Anyways, I will get installed pics when its done for sure.

pimpeterbilt · 05-26-2009, 11:01 PM

All said and done. The kid came out Monday and I got it all in and snapped some pics...

03-05-2009, 11:33 PM	#1
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	'00 Painted Interior Project I've been in the works of painting a dash for a kid that I know. The pickup is a 2000 ECSB Silverado. Of the interior pieces, this is all that will be painted... -Lower half of the dash: Glove box, fuse cover/end panels, dr. side knee bolster/panel, cigarette lighter cover, ash try cover and the middle piece in the center console with the flip up lid. -Surrounds on the pass. side air vents -Inner areas of the gauge bezel -Door Panels: Speaker grilles, window switches, and door handle trim -A pillar covers The kid rides motorcycles and I have came up with a design/logo that will have his bike number and last name. That will be airbrushed on the A pillar covers and also will be airbrushing some ghost flames on the dash and door pieces. Also sold him my rear bucket seat and fiberglass speaker box along with my two JL Audio W1s and amp. The speaker box has already been repainted, did it a two tone with the color we are using and a SEM dye the same color as the interior. That is already installed and painted. Also I am painting my old Trenz billet dash trim that will be painted to match also. Heres some previous pictures and pictures of some of the dash that I was working on tonight... First off the paint that is being used for everything Wetsanding the speaker box Sanding on the knee bolster piece. Starting off with 120 grit. All sanded with 120. Gone over with 180. Got the glove box apart and other pieces sanded tonight Everything is all sanded down and ready for primer except the glove box and lower dash piece pictured in the last picture. More pics to come as thing project continues. Hope to have it done by the next weekend. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-06-2009, 10:26 AM	#2
gmcracing92 Drillin oil on American Soil! Join Date: Apr 2005 Location: Minot. North Dakota Posts: 418	Re: '00 Painted Interior Project that looks great! i started trying to do some of that myself, starting with some of the under the hood plastics like fuse box cover and the engine covers on my 6.0. u have great patients because i thought it was too time consuming, and then my new air compressor broke. but all that looks good and keep us updated with ur progress. __________________ Travis 70 Chevy c20 2wd 75 Chevy k10 4x4 parts truck 92 GMC Sierra c1500 2wd DD 99 Chevy Reg Cab Sht Box 1500 2wd 05 GMC Sierra Denali white

03-11-2009, 03:22 PM	#3
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project I got the glove box and surrounding panel sanded last night. Just need to do some final sanding on those pieces and a couple others. Gonna mask up some all the pieces and starting slingin' primer tonight. Next, start wetsanding the primer these next couple nights and start spraying color and airbrushing this weekend hopefully. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-13-2009, 10:00 PM	#5
gmcracing92 Drillin oil on American Soil! Join Date: Apr 2005 Location: Minot. North Dakota Posts: 418	Re: '00 Painted Interior Project lookin good man, lookin good.cant wait to see the finished product. __________________ Travis 70 Chevy c20 2wd 75 Chevy k10 4x4 parts truck 92 GMC Sierra c1500 2wd DD 99 Chevy Reg Cab Sht Box 1500 2wd 05 GMC Sierra Denali white

03-15-2009, 03:13 PM	#7
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project Update: Everything is all wetsanded as of yesterday. Tonight color will start flying as well as the airbrusing I plan on doing. Lots of pics to follow. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-12-2009, 11:02 PM	#4
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project Got everything primed last night. Tonight I started wetsanding with #400, finish with some #600. Some of the pieces are going to have to be sprayed with primer again...in which I am out of Due to the delay of no primer and having to prime some pieces a second time, color will have to wait a couple days. All wiped down ready to be shot A pillars primed Wetsanding tonight __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-14-2009, 12:04 AM	#6
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project Thanks. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-16-2009, 12:59 PM	#8
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project Heres the painted pictures. Last night I had problems when I started out to do the airbrushing/artwork on the A pillars. I sprayed a coat of white with my mini jet gun and ended up with a small run and fish eyes. So it will be sanded down and start again on it either tonight or real soon. Otherwise I got done last night around midnight. Everything wiped down ready for sealer. Note the little stand I made for painting/airbrushing the A pillars. First coat of base. Me spraying the clear. Done and cleared. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\| Last edited by pimpeterbilt; 03-16-2009 at 12:59 PM.

03-17-2009, 03:53 PM	#9
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: '00 Painted Interior Project that stuff looks great cant wait to see it installed __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

03-21-2009, 01:56 PM	#10
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project Got the airbrushing on the A pillars done last night. Was up until 3:30 this morning doing these. __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|

03-22-2009, 02:34 AM	#11
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: '00 Painted Interior Project wow looks good cant wait to see it installed __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

04-10-2009, 12:48 PM	#12
Real_McCoy Registered User Join Date: Oct 2007 Location: El Dorado, Kansas Posts: 198	Re: '00 Painted Interior Project This looks great. Where are you at on installation? Pics? __________________ Daniel 66 Chevy C10 LWB Support our troops!

04-10-2009, 01:24 PM	#13
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: '00 Painted Interior Project Wow, that's going to look great! I love the flames on the glovebox! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-10-2009 at 01:24 PM.

04-10-2009, 02:25 PM	#14
cmart Registered User Join Date: Nov 2008 Location: Nashville, TN Posts: 46	Re: '00 Painted Interior Project Wow! Very nice work. Hurry up and put more pictures on here! Got us hooked now. HA! Looking great! __________________ 1999 Chevrolet Silverado 1500 extended cab, short bed. 5.3L automatic.

05-26-2009, 11:01 PM	#16
pimpeterbilt Registered User Join Date: Oct 2008 Location: Enning, SD Posts: 17	Re: '00 Painted Interior Project All said and done. The kid came out Monday and I got it all in and snapped some pics... __________________ *Daily Driver* 01 Z71 ECSB\|5.3ltr\|4:10s\|Wheatley 89 Tune\|Pacesetter Shorty Headers\|No Cats, Flowtech Cutouts, Spintech, & 4x22in. S.S. Tips\|K&N Filter\|16x8 MB Wheels\|3in. Blocks & Cranked TBs\|Truxport Cover\|Fully Painted Interior\|JVC & JL Audio Stereo\|5% Tint\|Cobra CB *Deer Slayer* 73 Chevy RCLB\|K10\|4x4\|350ci\|4spd\|Homemade Bumper/Grille Guard\|Rear Light Bar w/ Tractor Lights\|Cobra CB w/ Whips\|



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.