292 6 cylinder.. (seattle) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 03-06-2009, 10:06 PM

For Sale, Good running 1967 292.. complete down to the belhousing, stick flywheel and clutch. even have the motor mount towers if needed.. $350 obo.. no shipping...

**CPNE** · 03-07-2009, 06:07 PM

Mark, how much for the motor mount towers?

Livrat · 03-07-2009, 10:03 PM

Jeff,
How does $40 shipped sound??

**CPNE** · 03-09-2009, 10:01 AM

Would that include the mounts on the engine pictured as well?

Livrat · 03-09-2009, 10:56 AM

Jeff, I was thinking just the towers as I have an extra set of them.
I would really like to keep a complete set with the engine just in case I end up putting it in something..
Do you happen to know if the engine side of the mounts is the same as a 250?

Mark

**CPNE** · 03-09-2009, 11:50 AM

I 'think" the LH tower is the same for both I6's, but only going on hear-say as I've never had a set to compare.

I'll paypal the $40 to you for the towers. Thanks

Livrat · 03-09-2009, 12:16 PM

Jeff,
Yes I can confirm that the left tower is the same for both sixes. I was wondering about the pieces that mount to the engine themselves. That part I am not sure about. I can compare them this afternoon with the 250 in my 72

If it all is the same I will go ahead and send a complete mounting setup.

**CPNE** · 03-09-2009, 12:24 PM

Ok, thanks.

03-06-2009, 10:06 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	292 6 cylinder.. (seattle) For Sale, Good running 1967 292.. complete down to the belhousing, stick flywheel and clutch. even have the motor mount towers if needed.. $350 obo.. no shipping... Attached Images

03-07-2009, 06:07 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 292 6 cylinder.. (seattle) Mark, how much for the motor mount towers? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-07-2009, 10:03 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 292 6 cylinder.. (seattle) Jeff, How does $40 shipped sound??

03-09-2009, 10:01 AM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 292 6 cylinder.. (seattle) Would that include the mounts on the engine pictured as well? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-09-2009, 10:56 AM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 292 6 cylinder.. (seattle) Jeff, I was thinking just the towers as I have an extra set of them. I would really like to keep a complete set with the engine just in case I end up putting it in something.. Do you happen to know if the engine side of the mounts is the same as a 250? Mark

03-09-2009, 11:50 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 292 6 cylinder.. (seattle) I 'think" the LH tower is the same for both I6's, but only going on hear-say as I've never had a set to compare. I'll paypal the $40 to you for the towers. Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-09-2009, 12:16 PM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 292 6 cylinder.. (seattle) Jeff, Yes I can confirm that the left tower is the same for both sixes. I was wondering about the pieces that mount to the engine themselves. That part I am not sure about. I can compare them this afternoon with the 250 in my 72 If it all is the same I will go ahead and send a complete mounting setup.

03-09-2009, 12:24 PM	#8
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 292 6 cylinder.. (seattle) Ok, thanks. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.