WTB Super Clean Fleet Tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 03-10-2009, 12:25 PM

Looking for a OE rust free/dent free fleet gate for a 67 Chevy. Willing to pay good money for the right gate (NOS range prices would need to be close to the DFW TX area for inspection).

I don't need a NOS gate because I do plan on flipping the handle. Not interested in aftermarket stuff. Any leads appreciated.

**4X4GMC1972** · 03-10-2009, 12:57 PM

I have an original '72 tailgate with all the Cheyenne trim. Only one little ding about as big as a pencil eraser. No bow at all It looks near new. I'd like to get around $475.00. I also have a straight GMC gate I'd take less for.

I work in Dallas

Todd

SCOTI · 03-10-2009, 02:03 PM

Quote:

Originally Posted by 4X4GMC1972

I have an original '72 tailgate with all the Cheyenne trim. Only one little ding about as big as a pencil eraser. No bow at all It looks near new. I'd like to get around $475.00. I also have a straight GMC gate I'd take less for.

I work in Dallas

Todd

The Chevy gate sounds like a possibility. Where in Dallas? I work in the Garland area.

STOCKISH · 03-10-2009, 02:40 PM

VA72C10 has some for sale.

SCOTI · 03-10-2009, 05:37 PM

Quote:

Originally Posted by 1972SuperCheyenne

VA72C10 has some for sale.

$600 plus shipping though.

I'm not saying it's not a good deal, I just feel for my application that's priced too high. That's prob a good deal for someone doing a 'correct' restoration vs. what I'm doing (retro look w/some body mods, frame/suspension mods, interior mods, wheels, brakes, FI big block . . ....).

Thanks for the lead though!

**4X4GMC1972** · 03-11-2009, 09:12 AM

Scoti
I work in east Dallas near Big Town in Mesquite.

killer71 · 03-11-2009, 09:31 AM

any picts of the chevy gait w/triim?

VA72C10 · 03-11-2009, 09:56 AM

It's 600 SHIPPED now

SCOTI · 03-11-2009, 09:56 AM

Quote:

Originally Posted by 4X4GMC1972

Scoti
I work in east Dallas near Big Town in Mesquite.

Oooo.... Not far @ all. Maybe we could meet @ lunch or after work one day. I could do today or tomorrow but then I'll be out of town for a week for Spring Break vacation w/the family.

I'll PM a contact number & we can go from there.

SCOTI · 03-11-2009, 09:57 AM

Quote:

Originally Posted by VA72C10

It's 600 SHIPPED now

$400 & I'm interested.

VA72C10 · 03-11-2009, 10:16 AM

Quote:

Originally Posted by SCOTI

$400 & I'm interested.

I understand...I'm planning on flipping the handle on mine which is why I picked up a nice used one that needs a little work for around 100 and selling the take off gate.

SCOTI · 03-11-2009, 12:11 PM

Quote:

Originally Posted by VA72C10

I understand...I'm planning on flipping the handle on mine which is why I picked up a nice used one that needs a little work for around 100 and selling the take off gate.

Exactly. A couple hunderd is do-able; $600 is too much for my location (minor-rust TX).

I'm in no hurry either. I'll cut the smooth gate I have & put a factory exterior on it before breaking the bank on one. But, should you get in a bind or need to move it sooner than later, keep me in mind

.

70rs/ss · 03-11-2009, 01:11 PM

I have one but it is a Blazer gate so it has the bolt holes across the inside upper lip for the seal hold down bracket? It is pretty straight no rust?

LMK?

03-10-2009, 12:25 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	WTB Super Clean Fleet Tailgate Looking for a OE rust free/dent free fleet gate for a 67 Chevy. Willing to pay good money for the right gate (NOS range prices would need to be close to the DFW TX area for inspection). I don't need a NOS gate because I do plan on flipping the handle. Not interested in aftermarket stuff. Any leads appreciated. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 03-10-2009 at 12:27 PM.

03-10-2009, 12:57 PM	#2
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: WTB Super Clean Fleet Tailgate I have an original '72 tailgate with all the Cheyenne trim. Only one little ding about as big as a pencil eraser. No bow at all It looks near new. I'd like to get around $475.00. I also have a straight GMC gate I'd take less for. I work in Dallas Todd __________________ 1978 Dodge Omni

03-10-2009, 02:40 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Super Clean Fleet Tailgate VA72C10 has some for sale. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-11-2009, 09:12 AM	#6
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: WTB Super Clean Fleet Tailgate Scoti I work in east Dallas near Big Town in Mesquite. __________________ 1978 Dodge Omni

03-11-2009, 09:31 AM	#7
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: WTB Super Clean Fleet Tailgate any picts of the chevy gait w/triim? __________________ R.I.P. Killer 71 10/26/07

03-11-2009, 09:56 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB Super Clean Fleet Tailgate It's 600 SHIPPED now __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-11-2009, 01:11 PM	#13
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: WTB Super Clean Fleet Tailgate I have one but it is a Blazer gate so it has the bolt holes across the inside upper lip for the seal hold down bracket? It is pretty straight no rust? LMK?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.