For Sale: 3/4 ton Hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 03-18-2009, 03:25 AM

Here is a very nice set of 3/4 ton hubcaps. I was told they are from a 73-up truck. They are straight, and fit nice and tight. The only problem is they will not fit a Dana 60 rear end, unless your rims are spaced out. The hub sticks out too far on the axle. You could also cut the centers out, and look like a 4WD going backwards

$100 Shipped to the lower 48.

**leddzepp** · 03-26-2009, 04:29 PM

ttt...any offers?

HOTFUN · 03-26-2009, 05:53 PM

Look very nice in the picture. Do they have any road pitting on the hub raised centers or dings to keep them from being new take off's? These are the aluminum type used from the early 80's to 87 C /K model truck caps and then the R/V style through 1991 to be exact. Thanks, Mark

**special-K** · 03-26-2009, 09:05 PM

`76-91 caps,FYI.I never realized they won`t clear a dana 60 hub.I guess they stick out more than 14-bolts.

**leddzepp** · 03-29-2009, 12:21 PM

Thanks for the info on these...I was not sure of the original application.

They have no pitting on them, but they are not 100% perfect. I would guess someone removed them early on in the life of the truck. No dents or dings, but there are some very, very small touch-ups someone did on a few spots where the black paint came off. It is hardly noticeable unless you really get up close and look at them. I think they are the best drivers I have ever seen....some might even call them NOS with "shelfware" but it is obvious they that have had some use.

**leddzepp** · 03-31-2009, 04:26 PM

Bump...lowered price

**leddzepp** · 04-06-2009, 01:20 PM

ttt

**leddzepp** · 04-30-2009, 12:03 PM

Still got these...anyone care to make an offer?

**leddzepp** · 05-08-2009, 11:34 AM

ttt

**leddzepp** · 05-11-2009, 06:26 PM

ttt....someone make an offer on these before I start playing frisbee with them

Cyclone44 · 05-11-2009, 07:19 PM

Just a idea....Since Tim said they are 76 up caps why not have one of the mods in this area delete this thread, And post them in the 73-87 area...You might get some interest in there........Good luck with your sale....

**leddzepp** · 05-11-2009, 08:05 PM

Quote:

Originally Posted by Cyclone44

Just a idea....Since Tim said they are 76 up caps why not have one of the mods in this area delete this thread, And post them in the 73-87 area...You might get some interest in there........Good luck with your sale....

I thought about doing that....but I looked at the traffic on this forum as opposed to that one, and this one gets a LOT more action. Thanks for the suggestion though. I am going to put these on Feebay and be done with them.

03-18-2009, 03:25 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	For Sale: 3/4 ton Hubcaps Here is a very nice set of 3/4 ton hubcaps. I was told they are from a 73-up truck. They are straight, and fit nice and tight. The only problem is they will not fit a Dana 60 rear end, unless your rims are spaced out. The hub sticks out too far on the axle. You could also cut the centers out, and look like a 4WD going backwards $100 Shipped to the lower 48. Attached Images Last edited by leddzepp; 03-31-2009 at 04:26 PM.

03-26-2009, 04:29 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps ttt...any offers?

03-26-2009, 05:53 PM	#3
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: For Sale: 3/4 ton Hubcaps Look very nice in the picture. Do they have any road pitting on the hub raised centers or dings to keep them from being new take off's? These are the aluminum type used from the early 80's to 87 C /K model truck caps and then the R/V style through 1991 to be exact. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

03-26-2009, 09:05 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: For Sale: 3/4 ton Hubcaps `76-91 caps,FYI.I never realized they won`t clear a dana 60 hub.I guess they stick out more than 14-bolts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-29-2009, 12:21 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps Thanks for the info on these...I was not sure of the original application. They have no pitting on them, but they are not 100% perfect. I would guess someone removed them early on in the life of the truck. No dents or dings, but there are some very, very small touch-ups someone did on a few spots where the black paint came off. It is hardly noticeable unless you really get up close and look at them. I think they are the best drivers I have ever seen....some might even call them NOS with "shelfware" but it is obvious they that have had some use.

03-31-2009, 04:26 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps Bump...lowered price

04-06-2009, 01:20 PM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps ttt

04-30-2009, 12:03 PM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps Still got these...anyone care to make an offer?

05-08-2009, 11:34 AM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps ttt

05-11-2009, 06:26 PM	#10
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: For Sale: 3/4 ton Hubcaps ttt....someone make an offer on these before I start playing frisbee with them

05-11-2009, 07:19 PM	#11
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: For Sale: 3/4 ton Hubcaps Just a idea....Since Tim said they are 76 up caps why not have one of the mods in this area delete this thread, And post them in the 73-87 area...You might get some interest in there........Good luck with your sale....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.