If you're looking for it, I probably have it... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

S3B3AST · 03-28-2009, 01:45 AM

Rear diferencial with Posi asking $150

GM 203 transfer case asking $150

Braden wench asking $80

Step side bed fenders, both sides, asking $40 each

Step side bed inner fenders, both sides, asking $40 each

Step side bed, front cab side piece asking $20

Front diferencial asking $100

Exhaust manafold for V8 350 asking $50 for the set

Also have Holly Caburator, 350 block bored.60 over, hood, front fenders, an extra cab (rusty floor boards), repair panals for the cab, passanger side door, gas pedel assembly, side marker lights, and emblems. Pictures and prices coming soon, if interested let me know I'll get them up faster.

I dont think most of these items are very easy to ship, but Im willing to work with anyone...also accepting trades.

S3B3AST · 03-28-2009, 01:46 AM

bean · 03-28-2009, 01:52 AM

put me down for the front stepside bed piece

**rockc** · 03-28-2009, 09:33 AM

I am interested in the fenders. what condition are they in?

71stub · 03-28-2009, 02:03 PM

What is the winch capacity? Thanks.

S3B3AST · 03-28-2009, 06:59 PM

Bean, I will find out how much shipping is what is you zip?

Rockc, I would call them good cond. straight with surface rust only on the under sides of them.

71stub, I do not know sorry, it came in the bed of the parts truck I bought.

To all you guys thanks for the intrest and I hope I helped. Any other questions just ask I will be glad to answer.

bean · 03-28-2009, 09:54 PM

I'm in Temple, TX and the zip is 76504. Thanks.

billsbowtie · 03-28-2009, 10:11 PM

how much for the holly carb. shipped to 24281. also a little info like what size it is and do you know its good? thanks bikll

Fubar · 03-29-2009, 12:10 AM

Are those lifted front leaf springs? are you willing to part with them and ship them 95467? Thanks, Eric

mrmojo32 · 03-29-2009, 01:06 AM

What is the diff ratio's of the front and rear diffs? Also what year did they come out of?

**rockc** · 03-29-2009, 10:07 AM

How much will it cost for fenders to 82210?

highrpm · 03-29-2009, 12:11 PM

Any bigger pic of the frame?

72blazer_mud_bogger · 03-29-2009, 12:29 PM

do you know if the winch works or if anything will need to be rebuilt or replaced

S3B3AST · 03-30-2009, 01:22 AM

Bill a friend of mine looked at the list numbers and told me it probable a 600, it also needs a rebuild is my guess (came in on the parts truck). want $60 plus shipping. Pic and shipping price tomorrow.

Eric, yes they are 4 inch lift hows $150 plus shipping. Pic and shipping price tomorrow.

MrMojo, I don't know but will get you casting numbers and date codes tomorrow.

Rockc, both sides in and out? let me know going for shipping prices tomorrow.

72Blazer, The guy I bought it from's brother tried to snake it back but it stayed with thr truck. Really don't know and it is missing it's remote too. It lookes OK mech. and eletrcal also lookes super heavy duty.

Highrpm, bigger and better pics tomorrow.

Everyone that gave a zip I will get shipping prices in the morning, plan on going to UPS anyone have other ideas let me know. Thanks again for time and consideration, get back to every one soon. JD

**rockc** · 03-30-2009, 07:51 AM

Both sides-outer fenders

woodridge · 03-30-2009, 08:10 AM

Pending shipping to 37716 commercial address,I would like to get in line for the winch.

Scott Johnson · 03-30-2009, 09:27 AM

How much for drivers side step fender to 71203? Do you have a np205/ th350 adapter?

Fubar · 03-30-2009, 06:19 PM

Thanks but I'll pass. I was hoping they were 2 1/2'' lift springs

charlesratcliff39 · 03-30-2009, 06:38 PM

Hey do you still have the step side fender ans how much to ship to 72150? Thanks CHARLES

BOOTDOGG · 03-30-2009, 08:40 PM

What is the rear end ratio and what brand is the posi, thanks.

billsbowtie · 03-30-2009, 09:40 PM

thanks for the info but i need a good one i can just put on and drive. bill

charlesratcliff39 · 03-30-2009, 10:03 PM

Hey Ill trade you a gilmer pulley kit brand new and a used but looks new water pump for the stepside fenders and inner fenders .

**Ricks1971** · 03-30-2009, 10:11 PM

frame for sale?

72blazer_mud_bogger · 03-30-2009, 10:37 PM

how much for the winch shipped to 22407

Blue_71 · 03-31-2009, 12:34 AM

i'd like to get in line for the springs, can you get a shipping quote to glasgow, ky 42141? ive had 6" springs shipped before but dont remember what it cost.

03-28-2009, 01:45 AM	#1
S3B3AST Registered User Join Date: Jan 2009 Location: Ceres, California Posts: 37	If you're looking for it, I probably have it... Rear diferencial with Posi asking $150 GM 203 transfer case asking $150 Braden wench asking $80 Step side bed fenders, both sides, asking $40 each Step side bed inner fenders, both sides, asking $40 each Step side bed, front cab side piece asking $20 Front diferencial asking $100 Exhaust manafold for V8 350 asking $50 for the set Also have Holly Caburator, 350 block bored.60 over, hood, front fenders, an extra cab (rusty floor boards), repair panals for the cab, passanger side door, gas pedel assembly, side marker lights, and emblems. Pictures and prices coming soon, if interested let me know I'll get them up faster. I dont think most of these items are very easy to ship, but Im willing to work with anyone...also accepting trades. __________________ 1971 Chevy 4x4 short bed fleet side

03-28-2009, 01:46 AM	#2
S3B3AST Registered User Join Date: Jan 2009 Location: Ceres, California Posts: 37	Re: If you're looking for it, I probably have it... __________________ 1971 Chevy 4x4 short bed fleet side

03-28-2009, 01:52 AM	#3
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: If you're looking for it, I probably have it... put me down for the front stepside bed piece

03-28-2009, 09:33 AM	#4
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 635	Re: If you're looking for it, I probably have it... I am interested in the fenders. what condition are they in? __________________ 72 chevy 3/4 ton 4X4

03-28-2009, 02:03 PM	#5
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: If you're looking for it, I probably have it... What is the winch capacity? Thanks. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd

03-28-2009, 06:59 PM	#6
S3B3AST Registered User Join Date: Jan 2009 Location: Ceres, California Posts: 37	Re: If you're looking for it, I probably have it... Bean, I will find out how much shipping is what is you zip? Rockc, I would call them good cond. straight with surface rust only on the under sides of them. 71stub, I do not know sorry, it came in the bed of the parts truck I bought. To all you guys thanks for the intrest and I hope I helped. Any other questions just ask I will be glad to answer. __________________ 1971 Chevy 4x4 short bed fleet side

03-28-2009, 09:54 PM	#7
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: If you're looking for it, I probably have it... I'm in Temple, TX and the zip is 76504. Thanks.

03-28-2009, 10:11 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: If you're looking for it, I probably have it... how much for the holly carb. shipped to 24281. also a little info like what size it is and do you know its good? thanks bikll __________________ i have 67/72 chevy truck parts f/s.

03-29-2009, 12:10 AM	#9
Fubar Registered User Join Date: Dec 2003 Location: Santa Rosa ,CA Posts: 96	Re: If you're looking for it, I probably have it... Are those lifted front leaf springs? are you willing to part with them and ship them 95467? Thanks, Eric

03-29-2009, 01:06 AM	#10
mrmojo32 Registered User Join Date: Jan 2007 Location: Louisiana Posts: 216	Re: If you're looking for it, I probably have it... What is the diff ratio's of the front and rear diffs? Also what year did they come out of? __________________ 1972 LWB 1969 4x4 Suburban 1989 4x4 Jimmy

03-29-2009, 10:07 AM	#11
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 635	Re: If you're looking for it, I probably have it... How much will it cost for fenders to 82210? __________________ 72 chevy 3/4 ton 4X4

03-29-2009, 12:11 PM	#12
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: If you're looking for it, I probably have it... Any bigger pic of the frame?

03-29-2009, 12:29 PM	#13
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: If you're looking for it, I probably have it... do you know if the winch works or if anything will need to be rebuilt or replaced

03-30-2009, 01:22 AM	#14
S3B3AST Registered User Join Date: Jan 2009 Location: Ceres, California Posts: 37	Re: If you're looking for it, I probably have it... Bill a friend of mine looked at the list numbers and told me it probable a 600, it also needs a rebuild is my guess (came in on the parts truck). want $60 plus shipping. Pic and shipping price tomorrow. Eric, yes they are 4 inch lift hows $150 plus shipping. Pic and shipping price tomorrow. MrMojo, I don't know but will get you casting numbers and date codes tomorrow. Rockc, both sides in and out? let me know going for shipping prices tomorrow. 72Blazer, The guy I bought it from's brother tried to snake it back but it stayed with thr truck. Really don't know and it is missing it's remote too. It lookes OK mech. and eletrcal also lookes super heavy duty. Highrpm, bigger and better pics tomorrow. Everyone that gave a zip I will get shipping prices in the morning, plan on going to UPS anyone have other ideas let me know. Thanks again for time and consideration, get back to every one soon. JD __________________ 1971 Chevy 4x4 short bed fleet side

03-30-2009, 07:51 AM	#15
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 635	Re: If you're looking for it, I probably have it... Both sides-outer fenders __________________ 72 chevy 3/4 ton 4X4 Last edited by rockc; 03-31-2009 at 07:04 PM.



Register or Log In To remove these advertisements.

03-30-2009, 08:10 AM	#16
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: If you're looking for it, I probably have it... Pending shipping to 37716 commercial address,I would like to get in line for the winch. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

03-30-2009, 09:27 AM	#17
Scott Johnson Junior Member Join Date: Feb 2003 Location: Louisiana Posts: 281	Re: If you're looking for it, I probably have it... How much for drivers side step fender to 71203? Do you have a np205/ th350 adapter? __________________ 71 C10 Step Daily Driver 72 K10 Suburban Work in Progress www.louisianaclassictruckclub.com

03-30-2009, 06:19 PM	#18
Fubar Registered User Join Date: Dec 2003 Location: Santa Rosa ,CA Posts: 96	Re: If you're looking for it, I probably have it... Thanks but I'll pass. I was hoping they were 2 1/2'' lift springs

03-30-2009, 06:38 PM	#19
charlesratcliff39 Registered User Join Date: Mar 2009 Location: Sheridan , Arkansas Posts: 279	Re: If you're looking for it, I probably have it... Hey do you still have the step side fender ans how much to ship to 72150? Thanks CHARLES

03-30-2009, 08:40 PM	#20
BOOTDOGG YOHNCO., LLC Join Date: Jan 2008 Location: ENTERPRISE, AL Posts: 28	Re: If you're looking for it, I probably have it... What is the rear end ratio and what brand is the posi, thanks.

03-30-2009, 09:40 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: If you're looking for it, I probably have it... thanks for the info but i need a good one i can just put on and drive. bill __________________ i have 67/72 chevy truck parts f/s.

03-30-2009, 10:03 PM	#22
charlesratcliff39 Registered User Join Date: Mar 2009 Location: Sheridan , Arkansas Posts: 279	Re: If you're looking for it, I probably have it... Hey Ill trade you a gilmer pulley kit brand new and a used but looks new water pump for the stepside fenders and inner fenders .

03-30-2009, 10:11 PM	#23
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,782	Re: If you're looking for it, I probably have it... frame for sale?

03-30-2009, 10:37 PM	#24
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: If you're looking for it, I probably have it... how much for the winch shipped to 22407

Register or Log In To remove these advertisements.