Anybody thought about doing this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gopokes · 03-28-2009, 01:58 PM

I remembered seeing this in a magazine a while back and found it again online. Have any of you guys thought about doing this to your trucks? I wonder how hard it would be...

**leddzepp** · 03-28-2009, 02:03 PM

That's habanero...one of the finest one-off trucks I have ever seen.

Brad · 03-28-2009, 02:13 PM

Someone on here was considering doing that using a Honda Del Sol rear window regulator. Might have been Frizzle Fry with one of his trucks...

69lemans · 03-28-2009, 02:20 PM

Looks expensive. Be nice to have,but not on my budget

70 Suburban · 03-28-2009, 02:23 PM

Im goin to do this on my 65

Andy4639 · 03-28-2009, 02:32 PM

They did it to the 67 in fast & furious truck if you look at the video with the burn out's on it the guy has his arm sticking out the back.Also you can use a old station wagon rear window out of the tailgate that is electric and it would work pretty good I think.

70 Suburban · 03-28-2009, 02:40 PM

why not use the motor out of the 73 up blazer its made for this size glass and its more available

big_al_71 · 03-28-2009, 03:10 PM

Never thought about doing that, but I must say that interior looks awesome..

Highsteel · 03-28-2009, 03:13 PM

That would be way better than a slider, IMHO.

**americanmusc1e** · 03-28-2009, 03:47 PM

Quote:

Originally Posted by gopokes

I remembered seeing this in a magazine a while back and found it again online. Have any of you guys thought about doing this to your trucks? I wonder how hard it would be...

I thought about doing it with a split window and two regulators but i didn't think they made a regulator strong enough for the whole thing.
I don't have the time or the money for that anyway

LONGHAIR · 03-28-2009, 04:07 PM

I don't know about on a 67-72, but there is a kit made to to this to square bodies (73-87) It is fairly straight-foreward, but there is a little "bravery" involved. Many people are not comfortable with the cutting that is required on something like this. I did several of them many years ago, back when removable hard top kits were popular too. I don't even have a guess about how many S-10, Nissan Harbody, Isuzu P'up and Dodge D-50 roofs I cut off back them.

OARNGESI · 03-28-2009, 04:50 PM

I knew a guy who did one on a 85 using parts from an old stationwagon

piecesparts · 03-28-2009, 05:13 PM

I have another plan. I have made the rear glass for mine, so that the glass will pop out at the bottom, like a side window on an Astro van.

The glass had to be drilled and hardened to allow this, but that was easier than I thought it would be.

OARNGESI · 03-28-2009, 05:26 PM

Quote:

Originally Posted by piecesparts

i have another plan. I have made the rear glass for mine, so that the glass will pop out at the bottom, like a side window on an astro van.

The glass had to be drilled and hardened to allow this, but that was easier than i thought it would be.

did you do this does it leak

piecesparts · 03-28-2009, 05:37 PM

Quote:

Originally Posted by OARNGESI

did you do this does it leak

Still in construction, however the use of the rubber sealing material that I used from Trimlock will not let it leak. There are latches on sides of the cab and the pivots will be just above the latches on the top of the galss.

**truckdude239** · 03-28-2009, 05:43 PM

the toyota 4 runners have a rear window that does the same thing

jbristo67 · 03-28-2009, 06:59 PM

There was a new guy on here the other day that said he did it. It was a bagged truck in flat black primer with suicide doors.

ANTHONY67 · 03-28-2009, 07:05 PM

man that looks cool any pic of the whole trucks

**VetteVet** · 03-28-2009, 07:16 PM

here
http://www.customclassictrucks.com/f...c10/index.html

PanelDeland · 03-28-2009, 07:30 PM

I'm more mechanical than body so I think an A/C would be less hassle. Just my personal comfort factor.

gopokes · 03-28-2009, 08:19 PM

I know the new tundras have this, I was just wondering how much fabrication would be involved to do it to our trucks...

Lugnut64052 · 03-28-2009, 09:21 PM

Quote:

Originally Posted by gopokes

I know the new tundras have this, I was just wondering how much fabrication would be involved to do it to our trucks...

2003-2004 Tundras had a roll-down rear window. I've been mulling the idea for a while, but coming up with a cheap donor would be tough. Been casually keeping my eyes peeled for one though.

Looks like a lot of fabrication. Anything is possible given the right motivation and $$.

BHyatt · 03-28-2009, 09:31 PM

I was considering something similar. I had the idea of having the rear window cut into three pieces. I was thinking of having the sides smaller and stationary while a wider section in the middle was operational. I believe that the section would be light enough that a standard window regulator could easily provide operation. I would imagine some sort of H-channel could be found to work as a track for the center section. Okay, maybe I have spent a lot of time thinking about this, LOL.

**El Jay** · 03-28-2009, 09:36 PM

I like that. I think it's pretty neat.

But, there's an old axiom that goes something like, "Everything old is new again."
IIRC, the original idea was probably in use 70+ years ago.

If I had the abilities, I'd do it.

lclippard · 07-14-2009, 10:10 PM

anyone thought about using an explorer sport trac rear window? it has three sections, the outer two are stationary and the larger center section rolls down. and the entire glass, track, motor is an assembly that bolts in(to the sport-trac). www.car-part.com shows several in this area for $100-$150 complete.

03-28-2009, 01:58 PM	#1
gopokes Registered User Join Date: Nov 2008 Location: Oklahoma City Oklahoma Posts: 431	Anybody thought about doing this? I remembered seeing this in a magazine a while back and found it again online. Have any of you guys thought about doing this to your trucks? I wonder how hard it would be...

03-28-2009, 02:03 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Anybody thought about doing this? That's habanero...one of the finest one-off trucks I have ever seen.

03-28-2009, 02:13 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Anybody thought about doing this? Someone on here was considering doing that using a Honda Del Sol rear window regulator. Might have been Frizzle Fry with one of his trucks... __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-28-2009, 02:20 PM	#4
69lemans Registered User Join Date: Aug 2008 Location: simpsonville,sc Posts: 417	Re: Anybody thought about doing this? Looks expensive. Be nice to have,but not on my budget

03-28-2009, 02:23 PM	#5
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Anybody thought about doing this? Im goin to do this on my 65

03-28-2009, 02:32 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anybody thought about doing this? They did it to the 67 in fast & furious truck if you look at the video with the burn out's on it the guy has his arm sticking out the back.Also you can use a old station wagon rear window out of the tailgate that is electric and it would work pretty good I think. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-28-2009, 02:40 PM	#7
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Anybody thought about doing this? why not use the motor out of the 73 up blazer its made for this size glass and its more available

03-28-2009, 03:10 PM	#8
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Anybody thought about doing this? Never thought about doing that, but I must say that interior looks awesome.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-28-2009, 03:13 PM	#9
Highsteel Chasin' the Dream Join Date: Mar 2008 Location: Lost in the 70's Posts: 200	Re: Anybody thought about doing this? That would be way better than a slider, IMHO. __________________ Born with a Bowtie 1971 C/10 350/350 Daily Driver/project Assumption=The mother of all -ups

03-28-2009, 04:50 PM	#12
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Anybody thought about doing this? I knew a guy who did one on a 85 using parts from an old stationwagon __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

03-28-2009, 05:13 PM	#13
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Anybody thought about doing this? I have another plan. I have made the rear glass for mine, so that the glass will pop out at the bottom, like a side window on an Astro van. The glass had to be drilled and hardened to allow this, but that was easier than I thought it would be. Last edited by piecesparts; 03-28-2009 at 05:14 PM.

03-28-2009, 05:43 PM	#16
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: Anybody thought about doing this? the toyota 4 runners have a rear window that does the same thing __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-28-2009, 06:59 PM	#17
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: Anybody thought about doing this? There was a new guy on here the other day that said he did it. It was a bagged truck in flat black primer with suicide doors. __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

03-28-2009, 07:05 PM	#18
ANTHONY67 Registered User Join Date: Nov 2008 Location: FOREST MS Posts: 92	Re: Anybody thought about doing this? man that looks cool any pic of the whole trucks

03-28-2009, 07:16 PM	#19
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	Re: Anybody thought about doing this? here http://www.customclassictrucks.com/f...c10/index.html __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.



Register or Log In To remove these advertisements.

03-28-2009, 07:30 PM	#20
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Anybody thought about doing this? I'm more mechanical than body so I think an A/C would be less hassle. Just my personal comfort factor. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-28-2009, 08:19 PM	#21
gopokes Registered User Join Date: Nov 2008 Location: Oklahoma City Oklahoma Posts: 431	Re: Anybody thought about doing this? I know the new tundras have this, I was just wondering how much fabrication would be involved to do it to our trucks...

03-28-2009, 09:31 PM	#23
BHyatt Registered User Join Date: Jul 2007 Location: New Castle, IN Posts: 199	Re: Anybody thought about doing this? I was considering something similar. I had the idea of having the rear window cut into three pieces. I was thinking of having the sides smaller and stationary while a wider section in the middle was operational. I believe that the section would be light enough that a standard window regulator could easily provide operation. I would imagine some sort of H-channel could be found to work as a track for the center section. Okay, maybe I have spent a lot of time thinking about this, LOL.

03-28-2009, 09:36 PM	#24
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: Anybody thought about doing this? I like that. I think it's pretty neat. But, there's an old axiom that goes something like, "Everything old is new again." IIRC, the original idea was probably in use 70+ years ago. If I had the abilities, I'd do it. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

07-14-2009, 10:10 PM	#25
lclippard Registered User Join Date: Feb 2009 Location: huntersville, nc Posts: 144	Re: Anybody thought about doing this? anyone thought about using an explorer sport trac rear window? it has three sections, the outer two are stationary and the larger center section rolls down. and the entire glass, track, motor is an assembly that bolts in(to the sport-trac). www.car-part.com shows several in this area for $100-$150 complete. __________________ 69 burb/01 yukon chassis 65 Comet Caliente 289 4 Door Sedan 99 Millenia S (supercharged) 4 Door Sedan 02 Yamaha R6 69 swb c10 http://67-72chevytrucks.com/vboard/s...36#post3799136 building with a buddy: 85 C10 http://67-72chevytrucks.com/vboard/s...94#post3708194 Last edited by lclippard; 07-14-2009 at 10:46 PM.

Register or Log In To remove these advertisements.