Rust free A/C cab and frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drbyrdman · 04-04-2009, 10:16 AM

Parting out my project. Tons of parts. Some are new. A/C cab, frame,DIY 4x4 front and rear spring hangers,52" front springs,56" rear springs, 3/4 ton running gear Dana44 and 60, new windsheild,new metal door panels, steering wheel,steering colum rebuilt with all new parts,Flaming river steering u-joint,2wheel and 4wheel drive steering boxes,tons of extra parts. Have current title for truck. Have two titles one from oregon that is current and one from Idaho not current.
Bend Oregon
$2500 for everything
541-388-0978
541-948-2263

drbyrdman · 04-08-2009, 11:37 PM

no one needs any parts??

jholley · 04-09-2009, 12:02 AM

Everyone needs parts. Good price man. Just not a lot of folks have a lot of discretionary cash right now. ttt for you. Good luck.

STOCKISH · 04-09-2009, 11:08 AM

Looks like that would have been a sweet truck. Good luck on your sale. Bump for ya.

Jtrux · 04-09-2009, 11:13 AM

Sounds like a great price, good luck, hope your able to sell it whole.

my67chevytruck · 04-09-2009, 01:11 PM

location, location, location.....

drunkbus · 04-09-2009, 06:07 PM

What gear ratio in front and rear end? 6 or 8 lug?

drbyrdman · 04-09-2009, 06:25 PM

Quote:

Originally Posted by drunkbus

What gear ratio in front and rear end? 6 or 8 lug?

4.10 8 lug

drbyrdman · 04-09-2009, 06:27 PM

Quote:

Originally Posted by my67chevytruck

location, location, location.....

Bend oregon is in the middle of nowhere. But is one of the fastest growing city in the US still.

drunkbus · 04-09-2009, 07:08 PM

Quote:

Originally Posted by drbyrdman

4.10 8 lug

How much for them? I have a 1/2 ton dana 44 and 12 bolt out of a 72 Blazer I could swap you so you could still roll it around.

highrpm · 04-09-2009, 08:24 PM

What brand of springs? Do you have the DIY shackle flip?

drbyrdman · 04-09-2009, 08:24 PM

Quote:

Originally Posted by drunkbus

How much for them? I have a 1/2 ton dana 44 and 12 bolt out of a 72 Blazer I could swap you so you could still roll it around.

make me an offer.

drbyrdman · 04-09-2009, 08:26 PM

Quote:

Originally Posted by highrpm

What brand of springs? Do you have the DIY shackle flip?

chevy blazer and suburban stock rear springs. i took them apart and rebuilt them. new paint and friction pads. yes i have the flip and the front diy 4x4 kits.

highrpm · 04-09-2009, 08:28 PM

How much for the shackle flip?

drbyrdman · 04-09-2009, 08:38 PM

i would like to sell the whole lift together. 500 bucks for the springs and the diy 4x4 front and rear kits.

highrpm · 04-09-2009, 09:04 PM

Let me know if you decide to piece it out.
Thanks

drunkbus · 04-09-2009, 09:16 PM

Quote:

Originally Posted by drbyrdman

make me an offer.

PM sent

drbyrdman · 04-09-2009, 09:59 PM

Quote:

Originally Posted by highrpm

Let me know if you decide to piece it out.
Thanks

ok

drbyrdman · 04-11-2009, 10:33 AM

Ill take a 1000 bucks for the rolling chassic

runpasthefence · 04-11-2009, 11:29 AM

How about just the cab and doors, or the cab, doors, and front clip?

drbyrdman · 04-11-2009, 12:55 PM

Quote:

Originally Posted by runpasthefence

How about just the cab and doors, or the cab, doors, and front clip?

how you going to get it??

ewoody625 · 04-11-2009, 05:01 PM

Hi wondering what you want for the cab and doors if the other guy doesnt take it.
Thanks
Eric

ewoody625 · 04-11-2009, 05:04 PM

I would come pick up the cab

drbyrdman · 04-12-2009, 04:04 PM

Quote:

Originally Posted by ewoody625

I would come pick up the cab

you can have the whole truck for 1000 bucks.

Jtrux · 04-12-2009, 06:12 PM

If you want 500 for the suspension, get me the price for shipping to 78148. I've got cash in hand ready to go. Also do you have the raised steering arm?? Shocks included as well? Let me know, i'm ready to go.

04-04-2009, 10:16 AM	#1
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Rust free A/C cab and frame Parting out my project. Tons of parts. Some are new. A/C cab, frame,DIY 4x4 front and rear spring hangers,52" front springs,56" rear springs, 3/4 ton running gear Dana44 and 60, new windsheild,new metal door panels, steering wheel,steering colum rebuilt with all new parts,Flaming river steering u-joint,2wheel and 4wheel drive steering boxes,tons of extra parts. Have current title for truck. Have two titles one from oregon that is current and one from Idaho not current. Bend Oregon $2500 for everything 541-388-0978 541-948-2263 Last edited by drbyrdman; 09-07-2009 at 11:51 AM.

04-08-2009, 11:37 PM	#2
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Rust free A/C cab and frame no one needs any parts?? Last edited by drbyrdman; 04-08-2009 at 11:37 PM.

04-09-2009, 12:02 AM	#3
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: Rust free A/C cab and frame Everyone needs parts. Good price man. Just not a lot of folks have a lot of discretionary cash right now. ttt for you. Good luck. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

04-09-2009, 11:08 AM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Rust free A/C cab and frame Looks like that would have been a sweet truck. Good luck on your sale. Bump for ya. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-09-2009, 11:13 AM	#5
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Rust free A/C cab and frame Sounds like a great price, good luck, hope your able to sell it whole. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

04-09-2009, 01:11 PM	#6
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Rust free A/C cab and frame location, location, location..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-09-2009, 06:07 PM	#7
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Rust free A/C cab and frame What gear ratio in front and rear end? 6 or 8 lug?

04-09-2009, 08:24 PM	#11
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: Rust free A/C cab and frame What brand of springs? Do you have the DIY shackle flip?

04-09-2009, 08:28 PM	#14
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: Rust free A/C cab and frame How much for the shackle flip?

04-09-2009, 08:38 PM	#15
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Rust free A/C cab and frame i would like to sell the whole lift together. 500 bucks for the springs and the diy 4x4 front and rear kits.

04-09-2009, 09:04 PM	#16
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: Rust free A/C cab and frame Let me know if you decide to piece it out. Thanks

04-11-2009, 10:33 AM	#19
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Rust free A/C cab and frame Ill take a 1000 bucks for the rolling chassic

04-11-2009, 11:29 AM	#20
runpasthefence Registered User Join Date: Sep 2008 Location: Charleston, SC Posts: 159	Re: Rust free A/C cab and frame How about just the cab and doors, or the cab, doors, and front clip?

04-11-2009, 05:01 PM	#22
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: Rust free A/C cab and frame Hi wondering what you want for the cab and doors if the other guy doesnt take it. Thanks Eric

04-11-2009, 05:04 PM	#23
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: Rust free A/C cab and frame I would come pick up the cab



Register or Log In To remove these advertisements.

04-12-2009, 06:12 PM	#25
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Rust free A/C cab and frame If you want 500 for the suspension, get me the price for shipping to 78148. I've got cash in hand ready to go. Also do you have the raised steering arm?? Shocks included as well? Let me know, i'm ready to go. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

Register or Log In To remove these advertisements.