Interesting and Rare?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 04-28-2009, 08:40 PM

Been messing with 67-72 trucks since 81. Have had a dozen or more and have been to virtually hundreds of swap meets etc and have never seen these before. Told they are 67-78 GMC delux cab caps. Three are excellent while one has a couple of curb dings. Anyone have a clue to pricing them? Huck

mbgmike · 04-28-2009, 08:49 PM

There is a site online that sells hubcaps (Original ones) can't find it now in my favorites. They do not show those at all. I think its a good find.

sameyrasmea72 · 04-28-2009, 09:06 PM

They ran -78? or was that 67-68? I have a couple of single ones but they are not in good shape.

Longhorn Man · 04-28-2009, 09:24 PM

I would honestly think, you could put what ever price you wanted on them... they WOULD sell eventually.
Awesome find there huck

sweet70beast · 04-28-2009, 10:09 PM

I remember my Grandpa's 76 had the Chevy version on those hub caps on it when I was a kid. They are long now.

100%Chevy · 04-28-2009, 10:14 PM

Those are identical to the ones on my 68 Chevy truck---except for the GMC center.
Look at this site for wheelcovers:

http://www.hubcaps.org/

Shows your 67/68 GMC caps @$90.00 each.Same for my Chevy!

Mike.

**fine69** · 04-29-2009, 01:35 AM

Never seen any of those.

Give ya $5 for them. And i will pick them up.

hehe

Huck · 04-29-2009, 03:54 PM

Minor typo there--should be 67-68. I have seen and have Chevy versions but never seen GMCs before. Maybe Canada issue?? They look pretty good hanging up on the wall of the barn for now. hehehee

Longhorn Man · 04-29-2009, 04:15 PM

They were avalible, just not many survived. I have sitting right in front of me, a 1968 GMC brochure that shows those hub caps. The circle around the GMC letters is supposed to be a primer gray color, and the letters ar supposed to be red.

Longhorn Man · 04-29-2009, 04:28 PM

Did I mention the booklet is mint?

If my digi cam wasn't acting retarded, I'd be able to get better pics...

thirdstreettito · 04-29-2009, 04:52 PM

http://www.hubcaps.org/gmctrucks.html

Longhorn Man · 04-29-2009, 05:00 PM

but with red letters

dfosh · 04-29-2009, 05:07 PM

I have a set on my 68 GMC no damage on them but paint is faded a little .

longhorn70gmc · 04-30-2009, 12:55 AM

Man,
Being a Hub Cap Freak, I would love to get one of those for my Garage wall someday. Those caps are cool!!!!!!!!!! They give that style an appealing look!

**special-K** · 04-30-2009, 08:00 AM

I really need those for my`67 GMC Custom,not Deluxe.That website only has one and they only sell mint condition.I`d be willing to go $125-ish on that set.I actually like the 69-75s better.But,just to have the real deal I`d buy them.I just bought a set of stainless and a set of painted 67/68 outer nun dog dish(very rare) for $50 each set.

FRENCHBLUE72 · 04-30-2009, 09:35 AM

Very cool score...

**CPNE** · 04-30-2009, 10:24 AM

Quote:

Originally Posted by special-K

I really need those for my`67 GMC Custom,not Deluxe.That website only has one and they only sell mint condition.I`d be willing to go $125-ish on that set.I actually like the 69-75s better.But,just to have the real deal I`d buy them.I just bought a set of stainless and a set of painted 67/68 outer nun dog dish(very rare) for $50 each set.

IMO, the market for these is tiny which could either help or hurt your chances of a sale. $30- $35 each seems right for good used wheel covers. Plus now Tim can sell his stainless dog dish ones to me.

**special-K** · 04-30-2009, 10:58 AM

^Jeff,I saw you posted and before I even opened the thread I felt greedy.I was prepared to see you wanted in line.Next flash was that tailgate,so I was prepared to bow out on these,as painful as that would be.

I definately have you in mind for which ever I don`t use.If Paul`s Plating can restore/chrome the steel caps I`ll go that route,sin`r the truck`s a custom (Custom).

Back to these eull wheelcovers...nice find.Rare,yet limited demand.I think I`m the only one on the planet who wants them on a trucks...SERIOUSLY!!!!

.......................................................................ho w,bout one fitty?

BradE · 04-30-2009, 10:58 AM

Yeah, those are definitely from a '67 or '68. I bought some 6 lug rally's from a guy here local that were off his dad's original owner 1968 GMC. Here's what he "threw in" with the deal. The only problem: Dad apparently didn't appreciate the pop in tabs that keep the hubcaps on, so he drilled screws into the steelies

AND even had the decency to number them so they all fit correctly. #2 must not have had any problems because its not numbered and doesn't have any screw holes. Nice find Huck, those look to be in great shape!

LOW DOUGH · 04-30-2009, 11:08 AM

neat find

**CPNE** · 04-30-2009, 11:12 AM

Quote:

Originally Posted by special-K

^Jeff,I saw you posted and before I even opened the thread I felt greedy.I was prepared to see you wanted in line.Next flash was that tailgate,so I was prepared to bow out on these,as painful as that would be.

I definately have you in mind for which ever I don`t use.If Paul`s Plating can restore/chrome the steel caps I`ll go that route,sin`r the truck`s a custom (Custom).

Back to these eull wheelcovers...nice find.Rare,yet limited demand.I think I`m the only one on the planet who wants them on a trucks...SERIOUSLY!!!!

.......................................................................ho w,bout one fitty?

Tim, I have no interest in these, I roll poverty caps only. These are for the "Tophat and Tails" Jimmy owners, hope ya get them.

Huck · 05-02-2009, 08:28 AM

Think for now i will leave them on the wall until I find my next truck---I would hate to have sold them only to find a nice straight 67-8 GMC~~. if I do decide to sell---Tim--I'll let you know. Huck

heavy71chevy · 05-02-2009, 11:39 AM

man thosw3 are in good shape nice score

**special-K** · 05-02-2009, 09:01 PM

I`m the same way,Huck.It doesn`t bother me to have parts around waiting for a truck

.Matter of fact,this`67 GMC I`m building started around a clean Palamino Tan clip from Nebraska I nabbed at a swap meet with a friend in mind.His grille was hacked into a tube grille.By the time I ran into him he had traded it to his son.I wanted it anyway.

**LockDoc** · 05-03-2009, 09:57 AM

-
I have a chance to buy these for a decent price from a local guy. He says they are '72 GMC's and are in good shape. Are they in fact 72's? Sorry about the crappy pics but I think the second one is good enough to see what they are.

LockDoc

04-28-2009, 08:40 PM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Interesting and Rare?? Been messing with 67-72 trucks since 81. Have had a dozen or more and have been to virtually hundreds of swap meets etc and have never seen these before. Told they are 67-78 GMC delux cab caps. Three are excellent while one has a couple of curb dings. Anyone have a clue to pricing them? Huck Attached Images

04-28-2009, 09:06 PM	#3
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Interesting and Rare?? They ran -78? or was that 67-68? I have a couple of single ones but they are not in good shape. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

04-28-2009, 09:24 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Interesting and Rare?? I would honestly think, you could put what ever price you wanted on them... they WOULD sell eventually. Awesome find there huck

04-28-2009, 10:09 PM	#5
sweet70beast Registered User Join Date: Sep 2006 Location: Shelley Idaho Posts: 876	Re: Interesting and Rare?? I remember my Grandpa's 76 had the Chevy version on those hub caps on it when I was a kid. They are long now. __________________ 1970 Nova 327/T5 (my 1st car) 1971 K-20 350/350/205 (winter DD) 1953 GMC Suburban 1968 Chevy Bel Air 1976 Chev C-10 1972 Skylark (suncoupe) 1 of 3943 made

04-28-2009, 10:14 PM	#6
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Interesting and Rare?? Those are identical to the ones on my 68 Chevy truck---except for the GMC center. Look at this site for wheelcovers: http://www.hubcaps.org/ Shows your 67/68 GMC caps @$90.00 each.Same for my Chevy! Mike. Last edited by 100%Chevy; 04-28-2009 at 10:18 PM.

04-28-2009, 08:49 PM	#2
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Interesting and Rare?? There is a site online that sells hubcaps (Original ones) can't find it now in my favorites. They do not show those at all. I think its a good find.

04-29-2009, 01:35 AM	#7
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Interesting and Rare?? Never seen any of those. Give ya $5 for them. And i will pick them up. hehe __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

04-29-2009, 03:54 PM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Interesting and Rare?? Minor typo there--should be 67-68. I have seen and have Chevy versions but never seen GMCs before. Maybe Canada issue?? They look pretty good hanging up on the wall of the barn for now. hehehee

04-29-2009, 04:15 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Interesting and Rare?? They were avalible, just not many survived. I have sitting right in front of me, a 1968 GMC brochure that shows those hub caps. The circle around the GMC letters is supposed to be a primer gray color, and the letters ar supposed to be red. Last edited by Longhorn Man; 04-29-2009 at 04:31 PM.

04-29-2009, 04:28 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Interesting and Rare?? Did I mention the booklet is mint? If my digi cam wasn't acting retarded, I'd be able to get better pics...

04-29-2009, 04:52 PM	#11
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Interesting and Rare?? http://www.hubcaps.org/gmctrucks.html __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck Last edited by thirdstreettito; 04-29-2009 at 04:52 PM.

04-29-2009, 05:00 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Interesting and Rare?? but with red letters

04-29-2009, 05:07 PM	#13
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	Re: Interesting and Rare?? I have a set on my 68 GMC no damage on them but paint is faded a little .

04-30-2009, 12:55 AM	#14
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Interesting and Rare?? Man, Being a Hub Cap Freak, I would love to get one of those for my Garage wall someday. Those caps are cool!!!!!!!!!! They give that style an appealing look! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE! Last edited by longhorn70gmc; 04-30-2009 at 12:57 AM. Reason: Somehow hit the wrong button.

04-30-2009, 08:00 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Interesting and Rare?? I really need those for my`67 GMC Custom,not Deluxe.That website only has one and they only sell mint condition.I`d be willing to go $125-ish on that set.I actually like the 69-75s better.But,just to have the real deal I`d buy them.I just bought a set of stainless and a set of painted 67/68 outer nun dog dish(very rare) for $50 each set. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

04-30-2009, 09:35 AM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Interesting and Rare?? Very cool score... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-30-2009, 10:58 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Interesting and Rare?? ^Jeff,I saw you posted and before I even opened the thread I felt greedy.I was prepared to see you wanted in line.Next flash was that tailgate,so I was prepared to bow out on these,as painful as that would be. I definately have you in mind for which ever I don`t use.If Paul`s Plating can restore/chrome the steel caps I`ll go that route,sin`r the truck`s a custom (Custom). Back to these eull wheelcovers...nice find.Rare,yet limited demand.I think I`m the only one on the planet who wants them on a trucks...SERIOUSLY!!!!.......................................................................ho w,bout one fitty? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-30-2009, 10:58 AM	#19
BradE yard boy Join Date: Sep 2007 Location: Franklin, TN Posts: 119	Re: Interesting and Rare?? Yeah, those are definitely from a '67 or '68. I bought some 6 lug rally's from a guy here local that were off his dad's original owner 1968 GMC. Here's what he "threw in" with the deal. The only problem: Dad apparently didn't appreciate the pop in tabs that keep the hubcaps on, so he drilled screws into the steelies AND even had the decency to number them so they all fit correctly. #2 must not have had any problems because its not numbered and doesn't have any screw holes. Nice find Huck, those look to be in great shape! Attached Images __________________ 1984 Chevy c20

04-30-2009, 11:08 AM	#20
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Interesting and Rare?? neat find

05-02-2009, 08:28 AM	#22
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Interesting and Rare?? Think for now i will leave them on the wall until I find my next truck---I would hate to have sold them only to find a nice straight 67-8 GMC~~. if I do decide to sell---Tim--I'll let you know. Huck

05-02-2009, 11:39 AM	#23
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Interesting and Rare?? man thosw3 are in good shape nice score __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

05-02-2009, 09:01 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Interesting and Rare?? I`m the same way,Huck.It doesn`t bother me to have parts around waiting for a truck.Matter of fact,this`67 GMC I`m building started around a clean Palamino Tan clip from Nebraska I nabbed at a swap meet with a friend in mind.His grille was hacked into a tube grille.By the time I ran into him he had traded it to his son.I wanted it anyway. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-03-2009, 09:57 AM	#25
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: Interesting and Rare?? - I have a chance to buy these for a decent price from a local guy. He says they are '72 GMC's and are in good shape. Are they in fact 72's? Sorry about the crappy pics but I think the second one is good enough to see what they are. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

Register or Log In To remove these advertisements.