67 GMC Panel, parts 4 sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 05-02-2009, 01:50 AM

Just picked this up, going to be using the drivetrain, front clip, seats, and gauges.
PO had holes filled and welded on each panel side and also top. Apparently had some type of windows in it at one time. Then had a cheap paint job done, looks to be a bit of filler throughout. Has a leaf spring rear suspension that has been flipped to achieve the lowered stance and looks like the front coils have been heated, or maybe cut!?
Everything else is up for grabs:

Front doors: driver side $100.00, passenger side $50.00 shows some rust bubbles
Rear (clamshell) doors: $50.00 left (drivers side) shows body filler crack in paint, right (passenger side) 250.00 very nice.
Rear bumper: $50.00 pretty straight, very good driver quality
Rear bumper brackets (leaf spring) $40.00

Please post any other requests for parts and I can let you know if they are available and cost.
Would be very interested in selling rolling chassis and or tub on rolling chassis also.
All prices OBO and plus the ride...

Thank you
Adam

**special-K** · 05-02-2009, 08:11 AM

If the body isn`t taken(I hope someone does) would you cut out the fuel filler area and sell that with cap and filler neck?Everything but the tank?
The glass isn`t Soft Ray,is it?If it is,I`d like the wing glass and latches if door buyer doesn`t require`67 features.Then,there`s the outside mirrors...my zip is 21771 once we know what I`m getting.I can wait to see what pans out.

stealthy '69 · 05-02-2009, 08:51 AM

any pics of the rear bumper?

OLEBEATER · 05-02-2009, 09:08 AM

Interested in the seat belts if they are black...........??????

budnikguy · 05-02-2009, 10:14 AM

no seat belts, interior has been swapped to modern 88-98 "Tahoe" style. I will have to get more pics, give me a couple of days..

budnikguy · 05-02-2009, 10:15 AM

special-K, let me see what others may want before cutting body and or removing any glass from complete doors...Thanks

**Hart_Rod** · 05-02-2009, 01:55 PM

How much for the mirrors?

kev2809 · 05-02-2009, 03:21 PM

ill take some body panels if you cut it up. interested in area where 4th door would go and the passenger rear quarter panel behind the wheel. i can give you exact measurements if you decide to cut it up. also may need the rear light areas, but make sure if there is filler or not in these areas. i may still take em, if its not a whole lot. thanks

**1971 GMC SHORTY** · 05-02-2009, 03:54 PM

I seen that on craigslist good deal

**Classic Heartbeat** · 05-02-2009, 08:37 PM

Man oh man!!! I would like the whole thing!! Too bad I need to finnish my 67 Chevy panel first. Not verry many of the old GMCs around.... WES

**special-K** · 05-03-2009, 05:07 AM

Quote:

Originally Posted by Classic Heartbeat

Man oh man!!! I would like the whole thing!! Too bad I need to finnish my 67 Chevy panel first. Not verry many of the old GMCs around.... WES

That`s what I`m hoping...for someone,not me.

That`s fine Budnikguy.Still interested in the mirrors and backing plates/screws,If you`re pulling them from the doors.

ROBO66 · 05-05-2009, 01:46 AM

How does the grill and headlight bezels look? Price?

stealthy '69 · 05-05-2009, 01:51 AM

still intereted in the rear bumper pending pics adn shipping to 68127

blazerbrian72 · 05-05-2009, 02:37 AM

price on rolling chassis and tub without the parts that you need? it would be nice to trun it in to a
4x4 with my spare running gear and lift

budnikguy · 05-05-2009, 06:59 PM

Thanks for all the interest, I think I will be selling it complete minus the front clip, motor/trans, seats, and gauges. Here is a link for more pictures...

Adam
951-544-0721
playersnmv@aol.com

http://s569.photobucket.com/albums/ss136/67gmcpanel/

05-02-2009, 01:50 AM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	67 GMC Panel, parts 4 sale Just picked this up, going to be using the drivetrain, front clip, seats, and gauges. PO had holes filled and welded on each panel side and also top. Apparently had some type of windows in it at one time. Then had a cheap paint job done, looks to be a bit of filler throughout. Has a leaf spring rear suspension that has been flipped to achieve the lowered stance and looks like the front coils have been heated, or maybe cut!? Everything else is up for grabs: Front doors: driver side $100.00, passenger side $50.00 shows some rust bubbles Rear (clamshell) doors: $50.00 left (drivers side) shows body filler crack in paint, right (passenger side) 250.00 very nice. Rear bumper: $50.00 pretty straight, very good driver quality Rear bumper brackets (leaf spring) $40.00 Please post any other requests for parts and I can let you know if they are available and cost. Would be very interested in selling rolling chassis and or tub on rolling chassis also. All prices OBO and plus the ride... Thank you Adam Attached Images

05-02-2009, 08:11 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 GMC Panel, parts 4 sale If the body isn`t taken(I hope someone does) would you cut out the fuel filler area and sell that with cap and filler neck?Everything but the tank? The glass isn`t Soft Ray,is it?If it is,I`d like the wing glass and latches if door buyer doesn`t require`67 features.Then,there`s the outside mirrors...my zip is 21771 once we know what I`m getting.I can wait to see what pans out. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-02-2009 at 08:15 AM.

05-02-2009, 08:51 AM	#3
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: 67 GMC Panel, parts 4 sale any pics of the rear bumper?

05-02-2009, 09:08 AM	#4
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 67 GMC Panel, parts 4 sale Interested in the seat belts if they are black...........??????

05-02-2009, 10:14 AM	#5
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 67 GMC Panel, parts 4 sale no seat belts, interior has been swapped to modern 88-98 "Tahoe" style. I will have to get more pics, give me a couple of days..

05-02-2009, 10:15 AM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 67 GMC Panel, parts 4 sale special-K, let me see what others may want before cutting body and or removing any glass from complete doors...Thanks

05-02-2009, 01:55 PM	#7
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 67 GMC Panel, parts 4 sale How much for the mirrors? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-02-2009, 03:21 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: 67 GMC Panel, parts 4 sale ill take some body panels if you cut it up. interested in area where 4th door would go and the passenger rear quarter panel behind the wheel. i can give you exact measurements if you decide to cut it up. also may need the rear light areas, but make sure if there is filler or not in these areas. i may still take em, if its not a whole lot. thanks Last edited by kev2809; 05-02-2009 at 03:24 PM.

05-02-2009, 03:54 PM	#9
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 67 GMC Panel, parts 4 sale I seen that on craigslist good deal Last edited by 1971 GMC SHORTY; 05-02-2009 at 03:56 PM. Reason: DIDNT READ ALL OF ADD

05-02-2009, 08:37 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: 67 GMC Panel, parts 4 sale Man oh man!!! I would like the whole thing!! Too bad I need to finnish my 67 Chevy panel first. Not verry many of the old GMCs around.... WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-05-2009, 01:46 AM	#12
ROBO66 Registered User Join Date: May 2008 Location: Republic, Missouri Posts: 30	Re: 67 GMC Panel, parts 4 sale How does the grill and headlight bezels look? Price?

05-05-2009, 01:51 AM	#13
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: 67 GMC Panel, parts 4 sale still intereted in the rear bumper pending pics adn shipping to 68127

05-05-2009, 02:37 AM	#14
blazerbrian72 Registered User Join Date: Feb 2009 Location: Colorado and PA Posts: 108	Re: 67 GMC Panel, parts 4 sale price on rolling chassis and tub without the parts that you need? it would be nice to trun it in to a 4x4 with my spare running gear and lift Last edited by blazerbrian72; 05-05-2009 at 02:41 AM.

05-05-2009, 06:59 PM	#15
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 67 GMC Panel, parts 4 sale Thanks for all the interest, I think I will be selling it complete minus the front clip, motor/trans, seats, and gauges. Here is a link for more pictures... Adam 951-544-0721 playersnmv@aol.com http://s569.photobucket.com/albums/ss136/67gmcpanel/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.