|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-04-2009, 11:19 AM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: haiku maui
Posts: 2
|
1968 k20 needs help with steering correction
i lifted my 1968 k20 6" closed knuckle front axel manual steering . dont get full right turn ."any advice have pics not sure how to post here
|
|
|
|
05-04-2009, 01:33 PM
|
#2 |
|
Post Whore
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: 1968 k20 needs help with steering correction
Adjustable drop drag link is what you need.
Here is a pic of the one on my 69 K20 
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
05-04-2009, 02:47 PM
|
#3 |
|
Registered User
Join Date: Feb 2009
Location: ANTIOCH CALIFORNIA
Posts: 61
|
Re: 1968 k20 needs help with steering correction
you may have the pitman arm clocked wrong...easy check...set steering to straight ahead,remove pitman arm from box,now turn either way to stop and count turns while turnig back,should be about 3 1/2 to 4 turns.now find center of travel in steering box and re-install pitman arm/the pitman arm can be installed in four different positions so find the one that is closest to straight.and as JACK said you should have a drop drag link like the one in the picture good luck
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
