cab lights.....installation help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

capev86 · 05-04-2009, 08:28 PM

hello guys and gals....

picking up my 72 burb 2wd 3/4 ton tomorrow and wish to install the yankee brand chrome teardrop cab lights that came off my dad's 72 suburban. wondering if there is/was a dealer template or something to find the position for drilling holes. i want it to look right and not just eyeball it. any info you can give me is greatly appreciated!

thanks!

capev86 · 05-24-2009, 02:59 PM

anyone got any ideas on this?

eastcoastcivil · 08-11-2009, 02:46 PM

Do you have a factory assembly manual? It would probably show the locations in there.

capev86 · 08-11-2009, 04:09 PM

no, i do not have a factory manual for my burb. i have a 72 burb dealer brochure that i got off ebay and it has given me a good launch pad as to what my had for equipment and options to look into (eventually upgrading from standard 3/4 ton rear coils to the optional HD units for heavy trailer towing).

i have seen enough 67-72 gm trucks with the same exact lights. i am hopeful that dealers (or the factory) used a template for drilling the holes and that they weren't just done with a tape measure and eye balling it. i wish i had made a template from my dad's 72 burb 14 years ago when we pulled the cab lights.....would have saved a lot of headache now. maybe i will find a truck in a j-yard or someone else will make a template while their truck is apart for resto or whatever. things will work out, i am confident in that.....

Thanks!

**71blksuper4x4** · 08-11-2009, 04:48 PM

It shows where to mount them in my 1972 truck manual. Both the factory hockey puck and dealer installed tear drops are shown. I will look for you what the measurements are, but I can't help you with a scan, my scanner isn't working right now. Trevor

**71blksuper4x4** · 08-11-2009, 04:53 PM

well, dang, I thought it gave dimensions in the manual, but all it shows is a illustration of them and no measurements. Sorry, Trevor

eastcoastcivil · 08-11-2009, 07:23 PM

I know a young fellow who just installed them in the original holes on his truck, I will ask him to measure if you would like.

capev86 · 08-11-2009, 07:45 PM

it will be a while before i get the lights re-chromed, so no rush. i can wait until someone makes up a pattern or finds one somewhere. if this guy you know wants to help me out, all the power to him! thanks!

05-04-2009, 08:28 PM	#1
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	cab lights.....installation help hello guys and gals.... picking up my 72 burb 2wd 3/4 ton tomorrow and wish to install the yankee brand chrome teardrop cab lights that came off my dad's 72 suburban. wondering if there is/was a dealer template or something to find the position for drilling holes. i want it to look right and not just eyeball it. any info you can give me is greatly appreciated! thanks!

05-24-2009, 02:59 PM	#2
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: cab lights.....installation help anyone got any ideas on this?

08-11-2009, 02:46 PM	#3
eastcoastcivil Registered User Join Date: Apr 2007 Location: New Brunswick, Canada Posts: 201	Re: cab lights.....installation help Do you have a factory assembly manual? It would probably show the locations in there. __________________ If your not living for something, your dieing for nothing...

08-11-2009, 04:09 PM	#4
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: cab lights.....installation help no, i do not have a factory manual for my burb. i have a 72 burb dealer brochure that i got off ebay and it has given me a good launch pad as to what my had for equipment and options to look into (eventually upgrading from standard 3/4 ton rear coils to the optional HD units for heavy trailer towing). i have seen enough 67-72 gm trucks with the same exact lights. i am hopeful that dealers (or the factory) used a template for drilling the holes and that they weren't just done with a tape measure and eye balling it. i wish i had made a template from my dad's 72 burb 14 years ago when we pulled the cab lights.....would have saved a lot of headache now. maybe i will find a truck in a j-yard or someone else will make a template while their truck is apart for resto or whatever. things will work out, i am confident in that..... Thanks! Last edited by capev86; 08-11-2009 at 04:13 PM.

08-11-2009, 04:48 PM	#5
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: cab lights.....installation help It shows where to mount them in my 1972 truck manual. Both the factory hockey puck and dealer installed tear drops are shown. I will look for you what the measurements are, but I can't help you with a scan, my scanner isn't working right now. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-11-2009, 04:53 PM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: cab lights.....installation help well, dang, I thought it gave dimensions in the manual, but all it shows is a illustration of them and no measurements. Sorry, Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-11-2009, 07:23 PM	#7
eastcoastcivil Registered User Join Date: Apr 2007 Location: New Brunswick, Canada Posts: 201	Re: cab lights.....installation help I know a young fellow who just installed them in the original holes on his truck, I will ask him to measure if you would like. __________________ If your not living for something, your dieing for nothing...

08-11-2009, 07:45 PM	#8
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: cab lights.....installation help it will be a while before i get the lights re-chromed, so no rush. i can wait until someone makes up a pattern or finds one somewhere. if this guy you know wants to help me out, all the power to him! thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.