truck and blazer parts

[vintagechevy76]

Sorry i dont have any pictures yet but here is a list of stuff i dont need anymore.

72 blazer bedside. d/s. Just a little rust in the front corner. $250
72 gmc cab with title. Needs outer rockers and a pillars. It has a silver dollar size hole in the drivers side floor pan and two very small holes in the firewall but the rest is in great shape $250
1 black 72 door panel, passenger side $10
master cyl./booster/prop valve and brackets $40
Automatic and 4 speed pedal assemblies $25 each
good 69-72 chevy core support $50
gmc headlight buckets $20
gmc d/s fender with eyebrow molding $40
p/s stepside fender. Excellent shape, no rot. Just a couple small dings and original paint. $150
Bed supports for a wood floor $30
Wood floor front panel. Decent shape. $20
Dana 44 with drum brakes. 3.08 ratio $50
72 blazer d/s door. Good exterior but needs a bottom inside patch. With glass and hardware. $40
rear wheel well extensions $20 a set
factory 4x4 shackles rear $20
gmc turn signal lenses $10 set
glove box doors with good hinges $10
blue grill bow tie emblem. Driver quality $15
driver side front wheel well $20
a/c suitcase $20
good hood hinges but need cleaned up $25 a set
stock air cleaner assembly $10
exhaust manifolds $35 a set
4x4 disc brake rotors and backing plates. Also have calipers for a core if needed. $35
heater assemblies $20
alternators $20 each
4x4 power steering boxes with pitman arms $50
hood latches $15 each
bench seat brackets $10 a set
16" electric fan $20
2wd radiator hold down $10
gmc hood with letters $25
tailgate hardware $20
edelbrock performer intake $50

Ill try to get pics of what people are interested in soon. Thanks.

[vintagechevy76]

On the 72 cab, i already have the rockers off the truck and the inners look great. I was going to use this for my 71 but decided to fix the cab thats on it. I may have doors for this as well. Just havent made up my mind if i want to use them or not.

[ckexswb]

Would you have any, inner rear bumper brackets.

[vintagechevy76]

I dont think so but ill look. Should get up to my shop in the next day or two.

[teeitup]

Could I get a pic of the 4x4 exhaust manifolds? Thanks Randy

[oldschooler]

could I please get pictures of the 72 door panel (is that w/arm rest?) Also picture of the 16" electric fan. Thank you. Rich

[vintagechevy76]

Ill get pics up in the next day or two. Ill try to hurry but im in the middle of putting a laundry room back together today. The arm rest is gone on the door panel. Thanks for your patience.

[teeitup]

No rush, thanks Randy

[oldschooler]

Im in no hurry, ya gotta have clean clothes

[special-K]

Do you have any dirty socks?

Would you ship the GMC fender?Is Greyhound handy to you?If so,I`d like to see that sumbugger.

[71meangreenc10]

Can I get a pic of the bench seat brackets?

Thanks

Smitty

[vintagechevy76]

Ill get the pics up soon. Ive never used greyhound but have a bus stop a couple blocks away and would definitely use it if it saves you guys some money.

[1969stepside]

what are the wood floor supports for? step side or fleet long or short box?

[vintagechevy76]

bed supports are for a long bed fleetside but if you remove one of them they work for a short bed as well.

[michael bustamante]

interested in the rad fan once you post some pics. thank you

[Southern C10]

Interested in:
master cyl./booster/prop valve and brackets $40 Is it all complete?tailgate hardware $20 Is it all complete?

What condition are these two pieces in?

Shipping to 35904

Thanks.

[1972 CST]

i might be interested in the blazer bedsides could i see some pics

[oj70chevy]

Interested in the stock air cleaner assembly $10. I need one for a 1 brl. Pics please.

[kmk023000]

if you still have the blazer bedside, I would like to see a picture to examine the rust. Thanks!

[BigMikeBB]

How much for a 4x4 power steering gear box with the pitman arm and the drag link if you have one? Shipped to 60085? Thanks in advance.

[jcsarmy]

black panel
gmc ds fender
lenses
and if you have them. Rocker panels cab corners and patch for front bottom of DS fender.

[rockc]

would you take 35 pluss shipping on performer intake?

[1sik52]

I would like picks of the blazer bedside and am very interested