Lots of parts Helena MT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dlatulip · 05-10-2009, 10:59 AM

Keep looking on the 1st post. I will update/add/remove daily.

Note: I can have any of the items delivered to the SLC area for a Minimal fee. Traveling from Helena MT to SLC almost weekly.

GM Corporate 10-bolt front (8.5-in. 30 Spline) Eaton E-locker. Axle completely gone through. Spare axle shafts. Less than 100 miles on it. 4.10 gears $900. I will sell just the locker and ring/pinion for $700

4 37 12.50/15 Bias Maxxis Creepy Crawlers at least 75-80% tread left. Retail for $350+ ea. Mounted on 15x8 6 lug 5.5 Chevy $750

14Bolt FF Chevy rear axle 4.10 gears $100

Stock front tow hooks Chev $30

81-82 Chev front bumper. Turn signals in Bumper Awesome shape. $60

205 Transfer Case from a 72 Blazer with adapter to 465 $100

465 Tranny $100

73-87 Truck Tailgate Bead blasted Some pitting Very straight. $75

Factory Behind the seat Chevy Truck speaker brackets Pair (I have 2 sets) $20 Pair

Kodiak Sidewinder Electric Steps Model 950002 http://kodiakproducts.com/A_Showme2.html $120

14 Bolt SF Superior 6 lug Alloy axles $100

14 Bolt SF Disk brake kit. Brackets, Calipers, and rotors $100

Hubs Superwinch all steel premium 19 Spline D44 Corp 10 Bolt New $60

Used Warn Hubs D44 Corp 10 Bolt $30

Used Milemarker Hubs D44 Corp 10 Bolt $30

87 - 91 Blazer Suburban Fuel Pump Brand new (Silla) $35

Tilt Column from a 90 Blazer, cruise, int. wipers, Auto. Awesome shape with Keys $100

Brake Booster and Master Cylnder puller from a 90 K5 Blazer, look new. $50

Wiper Motor Pulled from the 90 only used 2 Months $20

Russell Chevy Center Bolt Plug Wire Dividers Anodized Red with Taylor Spiro Pro wires. $60

B&M Megashifter with New cable $100

Dana 60 F Open Carrier with 3.73 gears $100

Best contact would be email: dlatulip@att.net
Located in Helena. MT Pics available.

Best contact would be email: dlatulip@att.net

**too much stuff** · 05-10-2009, 11:11 AM

What year are the tow hooks from?

dlatulip · 05-10-2009, 11:20 AM

Tow hooks are 81 91 2nd Gen..

??? How do you edit the first post of a thread? No edit button!! But I have one on this post..

**too much stuff** · 05-10-2009, 11:42 AM

I think the edit feature only lasts about 5 mins.
Thanks for the hook info.

hessian18 · 05-10-2009, 04:32 PM

Would you be willing to sell the bumper lights from the 81 bumper separate ??

If so can I get a few pictures ?? Thanks

Im in California though hopefully shipping wont kill the deal.

wydomkr · 05-11-2009, 01:53 PM

Quote:

Originally Posted by dlatulip

Factory Behind the seat Chevy speaker brackets Pair (I have 2 sets) $25 Pair

Email sent.

dlatulip · 05-11-2009, 04:35 PM

Quote:

Originally Posted by hessian18

Would you be willing to sell the bumper lights from the 81 bumper separate ??

If so can I get a few pictures ?? Thanks

Im in California though hopefully shipping wont kill the deal.

No lights.. I was just stating it's the one that has the lights in the bumper.. Sorry for the confusion...

"Where is that edit button"

hessian18 · 05-11-2009, 06:57 PM

Oh ok thanks for the reply.

dlatulip · 07-13-2009, 08:28 PM

Updated the list

benoit454 · 07-14-2009, 07:37 PM

any pics of the wheels the 16's or the others?

dlatulip · 07-14-2009, 07:45 PM

I have some 15" as well if you are interested.
This rim has the worst nics in it. I haven't even tried to smooth them out.
Name: P1010032s.JPG
Views: 279
Size: 81.6 KB

Name: P1010032s.JPG
Views: 279
Size: 81.6 KB

USSkoval · 07-14-2009, 10:49 PM

Sill have the flat top knuckles? What ratio is/was in the 44?

dammitmitchell · 07-15-2009, 09:06 AM

oh my god.. o PREY you still have some of this stuff int he next few weeks..i just paid for all my motor parts..
but man i WILL be talking to you soon about some of your stuff...
good deals dude..

72junky · 07-15-2009, 04:05 PM

Question about the tilt column. Auto or manual? cruise control? I might be interested, trying to find a tilt for a manual trans w/o cruise.

thanks,
72junky

dlatulip · 07-15-2009, 04:32 PM

Quote:

Originally Posted by 72junky

Question about the tilt column. Auto or manual? cruise control? I might be interested, trying to find a tilt for a manual trans w/o cruise.

thanks,
72junky

Fixed the post. It's a cruise, int wiper auto column.

benoit454 · 07-15-2009, 04:55 PM

what do the 15's look like and are the 16's alum? they look it.

dlatulip · 07-15-2009, 07:48 PM

Quote:

Originally Posted by benoit454

what do the 15's look like and are the 16's alum? they look it.

Here's the 15's they are alloy just like the 16" Eagle Alloys pictured.
I will let these go for $150 plus shipping. They are a little more used than the Eagles. Some rock rash here and there.
Name: tire 2.JPG
Views: 249
Size: 52.8 KB

Name: tire 2.JPG
Views: 249
Size: 52.8 KB

72junky · 07-16-2009, 08:39 AM

Oh well, thanks for the update.

smashingchuck · 07-16-2009, 11:49 AM

I have a 3/4 ton (8 lug) axle. Which of the lock outs you have for sale will work? Pics?

ghettoluxury · 07-16-2009, 03:43 PM

Do you have any pics of the maxxis tires

benoit454 · 07-16-2009, 05:47 PM

I'd like to have the 15's but don't have the cash right now, going on vac. this weekend. So if they don't sale maybe I'll get the money soon and get em.

Tires come with em lol?

USSkoval · 07-16-2009, 07:54 PM

Quote:

Originally Posted by USSkoval

Sill have the flat top knuckles? What ratio is/was in the 44?

?

Just re-posting in case you missed this.

dlatulip · 07-16-2009, 08:39 PM

Quote:

Originally Posted by smashingchuck

I have a 3/4 ton (8 lug) axle. Which of the lock outs you have for sale will work? Pics?

As long as the axle is 19 spline internal style hubs they will work. Superwinch lists the same part # for them.

The Warns are pitted on the outside but like new inside.
Name: P1010013s.JPG
Views: 206
Size: 60.5 KB

Name: P1010013s.JPG
Views: 206
Size: 60.5 KB

Name: P1010014s.JPG
Views: 217
Size: 78.8 KB

dlatulip · 07-16-2009, 08:42 PM

Quote:

Originally Posted by ghettoluxury

Do you have any pics of the maxxis tires

They are pictured on the 15" rims above.

Name: tire 1.JPG
Views: 212
Size: 62.0 KB

dlatulip · 07-16-2009, 08:51 PM

Quote:

Originally Posted by USSkoval

?

Just re-posting in case you missed this.

I still have the complete axle with the flat tops. I forgot about checking the ratio though.

I can pull the cover in a day or two. I think they were 3.42 or 3.73

05-10-2009, 10:59 AM	#1
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Lots of parts Helena MT Keep looking on the 1st post. I will update/add/remove daily. Note: I can have any of the items delivered to the SLC area for a Minimal fee. Traveling from Helena MT to SLC almost weekly. GM Corporate 10-bolt front (8.5-in. 30 Spline) Eaton E-locker. Axle completely gone through. Spare axle shafts. Less than 100 miles on it. 4.10 gears $900. I will sell just the locker and ring/pinion for $700 4 37 12.50/15 Bias Maxxis Creepy Crawlers at least 75-80% tread left. Retail for $350+ ea. Mounted on 15x8 6 lug 5.5 Chevy $750 14Bolt FF Chevy rear axle 4.10 gears $100 Stock front tow hooks Chev $30 81-82 Chev front bumper. Turn signals in Bumper Awesome shape. $60 205 Transfer Case from a 72 Blazer with adapter to 465 $100 465 Tranny $100 73-87 Truck Tailgate Bead blasted Some pitting Very straight. $75 Factory Behind the seat Chevy Truck speaker brackets Pair (I have 2 sets) $20 Pair Kodiak Sidewinder Electric Steps Model 950002 http://kodiakproducts.com/A_Showme2.html $120 14 Bolt SF Superior 6 lug Alloy axles $100 14 Bolt SF Disk brake kit. Brackets, Calipers, and rotors $100 Hubs Superwinch all steel premium 19 Spline D44 Corp 10 Bolt New $60 Used Warn Hubs D44 Corp 10 Bolt $30 Used Milemarker Hubs D44 Corp 10 Bolt $30 87 - 91 Blazer Suburban Fuel Pump Brand new (Silla) $35 Tilt Column from a 90 Blazer, cruise, int. wipers, Auto. Awesome shape with Keys $100 Brake Booster and Master Cylnder puller from a 90 K5 Blazer, look new. $50 Wiper Motor Pulled from the 90 only used 2 Months $20 Russell Chevy Center Bolt Plug Wire Dividers Anodized Red with Taylor Spiro Pro wires. $60 B&M Megashifter with New cable $100 Dana 60 F Open Carrier with 3.73 gears $100 Best contact would be email: dlatulip@att.net Located in Helena. MT Pics available. Best contact would be email: dlatulip@att.net Last edited by dlatulip; 08-09-2009 at 02:15 PM.

05-10-2009, 11:11 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Lots of parts Helena MT What year are the tow hooks from? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-10-2009, 11:20 AM	#3
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Re: Lots of parts Helena MT Tow hooks are 81 91 2nd Gen.. ??? How do you edit the first post of a thread? No edit button!! But I have one on this post.. Last edited by dlatulip; 05-10-2009 at 11:24 AM.

05-10-2009, 11:42 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Lots of parts Helena MT I think the edit feature only lasts about 5 mins. Thanks for the hook info. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-10-2009, 04:32 PM	#5
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: Lots of parts Helena MT Would you be willing to sell the bumper lights from the 81 bumper separate ?? If so can I get a few pictures ?? Thanks Im in California though hopefully shipping wont kill the deal. __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

05-11-2009, 06:57 PM	#8
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: Lots of parts Helena MT Oh ok thanks for the reply. __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

07-13-2009, 08:28 PM	#9
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Re: Lots of parts Helena MT Updated the list

07-14-2009, 07:37 PM	#10
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Lots of parts Helena MT any pics of the wheels the 16's or the others? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-14-2009, 07:45 PM	#11
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Re: Lots of parts Helena MT I have some 15" as well if you are interested. This rim has the worst nics in it. I haven't even tried to smooth them out.

07-14-2009, 10:49 PM	#12
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Lots of parts Helena MT Sill have the flat top knuckles? What ratio is/was in the 44?

07-15-2009, 09:06 AM	#13
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Lots of parts Helena MT oh my god.. o PREY you still have some of this stuff int he next few weeks..i just paid for all my motor parts.. but man i WILL be talking to you soon about some of your stuff... good deals dude.. __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

07-15-2009, 04:05 PM	#14
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: Lots of parts Helena MT Question about the tilt column. Auto or manual? cruise control? I might be interested, trying to find a tilt for a manual trans w/o cruise. thanks, 72junky

07-15-2009, 04:55 PM	#16
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Lots of parts Helena MT what do the 15's look like and are the 16's alum? they look it. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-16-2009, 08:39 AM	#18
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: Lots of parts Helena MT Oh well, thanks for the update.

07-16-2009, 11:49 AM	#19
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Lots of parts Helena MT I have a 3/4 ton (8 lug) axle. Which of the lock outs you have for sale will work? Pics? __________________ 78 Build Thread 4Runner Build



Register or Log In To remove these advertisements.

07-16-2009, 03:43 PM	#20
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: Lots of parts Helena MT Do you have any pics of the maxxis tires __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

07-16-2009, 05:47 PM	#21
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Lots of parts Helena MT I'd like to have the 15's but don't have the cash right now, going on vac. this weekend. So if they don't sale maybe I'll get the money soon and get em. Tires come with em lol? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

Register or Log In To remove these advertisements.