A few parts in DFW.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gray Ghost · 05-21-2009, 03:51 PM

I got these for my stepper [which is up for sale cheap] and now I need to liquidate the extra truck parts. All prices are negotiable within reason and I will ship anything Greyhound you want. All are in really good shape, the crossmember is in excellent shape. Due to the cost of crating and freighting, I prefer local pickup on the fender but if want it shipped, add $100.

Pics later tonite...camera is in the other truck in Dallas.

Automatic crossmember $50
Driveshaft [was setup for TH350] $50
Cowl $25
Driver's side rear fender [no spare cutout] $200

**invicta455** · 05-21-2009, 05:15 PM

did the fender with the spare tire sell

Gray Ghost · 05-21-2009, 05:33 PM

It is still on the truck that is for sale. I have to sell the whole truck now to pay for the new motor for the S10.

Gray Ghost · 05-23-2009, 06:10 PM

I gto an unexpected check in the mail back from my local tax office....seems they overcharged us for the taxes on our home.

This means I am slashing prices!

Crossmember $25
Fender $125
Cowl $10
Driveshaft $25

Waste no time, they'll be going to CL very soon!

Gray Ghost · 05-23-2009, 10:29 PM

Here's the pics....the driveshaft has a TH350 yoke on it as well....what a deal!

Gray Ghost · 05-28-2009, 12:56 AM

ttt

Gray Ghost · 05-31-2009, 04:16 PM

ttt

Gray Ghost · 06-09-2009, 08:08 PM

TTT for today....so no one needs a 'spareless' rear fender for their stepside? How about for $100?

charlesratcliff39 · 06-09-2009, 08:22 PM

I want the fender shipped to 72150 how much ?

Gray Ghost · 06-09-2009, 08:30 PM

I'll bet I can get it there for $200 total...let me check Greyhound in the morning and find out for sure.

Gray Ghost · 06-10-2009, 11:10 AM

Quote:

Originally Posted by charlesratcliff39

I want the fender shipped to 72150 how much ?

Greyhound says $75 so $175 will get it there. It will have to come to Pine Bluff as there's no station in Sheridan. I think that's only 30 miles away from you. I can pack it up today and have it out in the morning if you send paypal to woodcat@suddenlink.net or send an MO to
Kelly Hanna
303 Main Street
Terrell, Texas 75160

**CPNE** · 06-10-2009, 11:44 AM

I'm interested in driveshaft, pending the following?

What is the overall length of that driveshaft, ujoint center to ujoint center?

You say it is set up for a th350. Was the donor truck a factory small block truck with V8 in the stock "forward" position?

Gray Ghost · 06-10-2009, 01:57 PM

The length is 52 3/8". The truck had a six cylinder and three speed from the factory. This driveshaft was made for the TH-350 that replaced the three speed.

**CPNE** · 06-10-2009, 02:06 PM

Thanks, too short for my application

Gray Ghost · 06-21-2009, 03:18 PM

Only the crossmember left....$40!!!

05-21-2009, 03:51 PM	#1
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	A few parts in DFW.... I got these for my stepper [which is up for sale cheap] and now I need to liquidate the extra truck parts. All prices are negotiable within reason and I will ship anything Greyhound you want. All are in really good shape, the crossmember is in excellent shape. Due to the cost of crating and freighting, I prefer local pickup on the fender but if want it shipped, add $100. Pics later tonite...camera is in the other truck in Dallas. Automatic crossmember $50 Driveshaft [was setup for TH350] $50 Cowl $25 Driver's side rear fender [no spare cutout] $200 __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

05-21-2009, 05:15 PM	#2
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 536	Re: A few parts in DFW.... did the fender with the spare tire sell

05-21-2009, 05:33 PM	#3
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... It is still on the truck that is for sale. I have to sell the whole truck now to pay for the new motor for the S10. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

05-23-2009, 06:10 PM	#4
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... I gto an unexpected check in the mail back from my local tax office....seems they overcharged us for the taxes on our home. This means I am slashing prices! Crossmember $25 Fender $125 Cowl $10 Driveshaft $25 Waste no time, they'll be going to CL very soon! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

05-23-2009, 10:29 PM	#5
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... Here's the pics....the driveshaft has a TH350 yoke on it as well....what a deal! Attached Images __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

05-28-2009, 12:56 AM	#6
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... ttt __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

05-31-2009, 04:16 PM	#7
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... ttt __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-09-2009, 08:08 PM	#8
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... TTT for today....so no one needs a 'spareless' rear fender for their stepside? How about for $100? __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-09-2009, 08:22 PM	#9
charlesratcliff39 Registered User Join Date: Mar 2009 Location: Sheridan , Arkansas Posts: 279	Re: A few parts in DFW.... I want the fender shipped to 72150 how much ?

06-09-2009, 08:30 PM	#10
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... I'll bet I can get it there for $200 total...let me check Greyhound in the morning and find out for sure. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-10-2009, 11:44 AM	#12
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: A few parts in DFW.... I'm interested in driveshaft, pending the following? What is the overall length of that driveshaft, ujoint center to ujoint center? You say it is set up for a th350. Was the donor truck a factory small block truck with V8 in the stock "forward" position? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all Last edited by CPNE; 06-10-2009 at 11:45 AM.

06-10-2009, 01:57 PM	#13
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... The length is 52 3/8". The truck had a six cylinder and three speed from the factory. This driveshaft was made for the TH-350 that replaced the three speed. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-10-2009, 02:06 PM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: A few parts in DFW.... Thanks, too short for my application __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-21-2009, 03:18 PM	#15
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: A few parts in DFW.... Only the crossmember left....$40!!! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.