Tach/vac & tach dashes fs

[cheyenne10]

I am selling 2 tach dashes in this post. (both V8 tachs) See other post for tilt steering columns.

1st dash setup is a factory chevy tach dash including hard to find vacuum gauge. I used a setup like this in my restored suburban for truck loaded with factory options. I dusted this one off and added a new bezel that was drilled for Speed warning knob and my rear AC, (was planning 2nd 2 wheel drive 1968 burb). The stock bezel I pulled off was from a 68-69 truck that had the headlight switch, wiper switch and a choke knob labeled accordingly. This bezel is avail. if desired by purchaser. Still could use a lense polishing but printed circuit board looks great and all needles look fine too. No rust in internals of gauge faces as sometimes found. $325+ shipping

2nd dash is a regular tach dash. Circuit board looks even better than 1st, dusty inside gauges, no rust visible, should clean up fine to use as-is or restore, again no visible rust inside. (did not pull this bezel). $225 + shipping.

[cheyenne10]

Posted late last night (PDT)

TTT for todays crowd.

[cheyenne10]

Would like to sell, anyone interested in a package deal with both of these and/or the tilts I have posted?

I will also be posting some more 1/2 and 3/4 ton hubcaps and maybe some other goodies soon. Stay tuned.

[glimmertwin01]

the reg one might work in my 72 K 5 does it have three holes? for knobs?

[Phil's 1970]

Regular tach dash, how much shipping to 28333? Thanks

[Arrington01]

I am interested in the Vac dash, how much for shipping to 79007

[cheyenne10]

Both would work in blazer. Might need new bezel. Non-vac dash has standard 2 hole bezel. You can always add more holes or buy new bezel, they are very reasonable from board vendors.

Will get shipping quotes as requested. Give me a couple of days to get good boxes.

[cheyenne10]

Feeling very under the weather (allergies!). Pms sent on shipping estimates.

[cheyenne10]

Vac dash SOLD thanks arrington01.

Standard tach dash still avail.
as well as bezel shown on Vac Dash. $25 +ride

[c10_1971]

Do you still have one of these?

[cheyenne10]

Tach/vac dash sold. Still have 2nd dash with tach avail.

Also dug up a real nice vac dash (no tach). need to come up with price or package offer if someone wants to combine them.

Have the new bezel posted above or a new all chrome bezel to include with a sale.

[c10_1971]

pm sent

[matchstick]

Send me a price on the 2 you have left please.

[cheyenne10]

TTT

C10_1971, quote sent.

Matchstick, send me your zip for shipping quote.

[cheyenne10]

Adding one more post before I start a new one.

Summary. Tach/vac dash at top of post sold.

Still have 2nd regular tach dash. Added new bezel that was shown on 1st dash to this in addition to cleaning up gauges and lense. Very nice factory correct unit. $225 +Shipping

3rd set is a vacuum gauge dash (no tach). Very clean also, bezel is cracked in upper left corner. $110 + shipping


See new post for NOS woodgrain bezel.

[bestchevyfan]

1 will take the one without tach.shipping to 35816 thanks,buddy

[cheyenne10]

bestchevyfan, PM sent.

Need to pin down your purchase of vac gauge set (no tach) and more particulars on bezel questions.

[c10_1971]

pm sent on tach dash thats left

[69sixpackbee]

I'll be needing some 3/4 ton hubcaps when you get some posted.
Thanx!
Bud

[cheyenne10]

Here is pic of 68 bezel for bestchevyfan. See pm for shipping info.

[STOCKISH]

If it looks as nice as in the picture I will take the tach dash in post #15 if you can do the $225 shipped. Zip is 27587. Thanks and LMK.

[cheyenne10]

waiting til morning to hear back from c10_1971 on final yeh or neh.

[STOCKISH]

OK, please let me know.

[cheyenne10]

TTT

Tach dash is still for sale, now with good used bezel.

1972cheyennesuper;
Your up. I swapped the new bezel off of the tach dash and added a good used bezel for the price of $225 shipped. I will extend you the same offer.

[STOCKISH]

I'll take it. Please send me your PayPal addy.