Gauging Interest in a K5 part-out ***dial-up warning, lots of pics*** - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*79 silverado* · 06-23-2009, 11:52 PM

If the truck doesn't sell whole locally, I might be parting out a 1990/91 K5 blazer, forget which. This was a truck restored for my father back around 2002 and after he blew a headgasket a little while ago he parked it and doesn't want it anymore.

To keep it board friendly with pricing, here's a few bits and pieces with prices, if I get enough interest and people who want things to make it worth while, I'll trailer it down and start taking it apart:

Doors: power window/locks, no mirrors $150/pr
Tailgate with power window, some rust starting on inner lip and paint lifting $75
Buckets: $200/set
Console: $50
Door panels: $150/set
Rims: $150/set
Fenders: $100/pr
Hood: $50
Radiator support with lights/grille/bezels/wiring $200
Front bumper: $50

I'd be looking to start cutting it up most likely after the 4th of July holiday if the interest is there. Lots of pics to follow that were from this past March after the snow thawed.

Before anyone asks, dashpad is cracked, and the drivetrain is a 350tbi/700-4r BUT I wasn't looking to sell that whole or as anything other than a functioning core for rebuild - he's an older retired guy and although the whole truck was mint when it was restored for him, I can't claim he was the best on its maintinance - headgasket let go which led to it being parked, and before that I know the t-case had a slow fluid leak as did one of the transmission seals.

Pics:

79gmcc15 · 06-24-2009, 01:54 AM

how much for the steering wheel??

rigon4 · 06-24-2009, 10:21 AM

how much do you want for the hole thing or the tub, top and tail gate?

*79 silverado* · 06-24-2009, 11:17 AM

Quote:

Originally Posted by 79gmcc15

how much for the steering wheel??

If there was interest in the other larger items probably $30 with the horn button etc complete plus shipping, but it would depend on selling larger parts first.

Quote:

Originally Posted by rigon4

how much do you want for the hole thing or the tub, top and tail gate?

$800/bo for the entire truck as it sits, be nice if it was sold this week/weekend? Tub is good but not perfect - has a rusty rocker panel thats pretty weak, otherwise in good shape with mostly surface rust in some spots and one bubble in the paint on the drivers qtr panel and the others are pretty self explanatory I think... Only thing you can't tell is the power mirror on the driver's side is busted which is why I was going to sell the doors without them...

ghettoluxury · 06-25-2009, 04:06 PM

How mutch for the cluster shipped to 45895

06-23-2009, 11:52 PM	#1
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	Gauging Interest in a K5 part-out *dial-up warning, lots of pics* If the truck doesn't sell whole locally, I might be parting out a 1990/91 K5 blazer, forget which. This was a truck restored for my father back around 2002 and after he blew a headgasket a little while ago he parked it and doesn't want it anymore. To keep it board friendly with pricing, here's a few bits and pieces with prices, if I get enough interest and people who want things to make it worth while, I'll trailer it down and start taking it apart: Doors: power window/locks, no mirrors $150/pr Tailgate with power window, some rust starting on inner lip and paint lifting $75 Buckets: $200/set Console: $50 Door panels: $150/set Rims: $150/set Fenders: $100/pr Hood: $50 Radiator support with lights/grille/bezels/wiring $200 Front bumper: $50 I'd be looking to start cutting it up most likely after the 4th of July holiday if the interest is there. Lots of pics to follow that were from this past March after the snow thawed. Before anyone asks, dashpad is cracked, and the drivetrain is a 350tbi/700-4r BUT I wasn't looking to sell that whole or as anything other than a functioning core for rebuild - he's an older retired guy and although the whole truck was mint when it was restored for him, I can't claim he was the best on its maintinance - headgasket let go which led to it being parked, and before that I know the t-case had a slow fluid leak as did one of the transmission seals. Pics:

06-24-2009, 01:54 AM	#2
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: Gauging Interest in a K5 part-out *dial-up warning, lots of pics* how much for the steering wheel?? __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

06-24-2009, 10:21 AM	#3
rigon4 Registered User Join Date: Mar 2006 Location: east syracuse ny Posts: 371	Re: Gauging Interest in a K5 part-out *dial-up warning, lots of pics* how much do you want for the hole thing or the tub, top and tail gate? __________________ 1981 K-5 Blazer 2wd 1985 C-10 Short step 1988 C-10 Suburban

06-25-2009, 04:06 PM	#5
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: Gauging Interest in a K5 part-out *dial-up warning, lots of pics* How mutch for the cluster shipped to 45895 __________________ 1949 Five Window, 1973 Step Side, 2000 Z71



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.