removing clutch fan from 5.3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stealthy '69 · 06-25-2009, 09:04 PM

I know this is kind of the wrong thread but i figured this was the best place. My buddy has a 02(i think) gmc sierra. He's trying to remove the clutch fan and he can't figure it out. I'm trying to help over the phone since he lives in Tulsa, Ok and I'm in Omaha, Ne. Any help would be great. Thanks.

68 short step · 06-25-2009, 09:20 PM

if he doesnt have the "tool" that keeps the waterpump pulley stationary......what he can do is
-keep the serp. belt on
-clamp some vice-grips on the waterpump pulley.
-then rotate the fan clutch (to remove it)....the vice-grips will keep the pulley from spinning when it comes in-contact with the belt....what part of t-town?

stealthy '69 · 06-26-2009, 02:31 AM

Cool thanks I'll let him know his options. I'm not sure if he's even gonna be removing it. He planned on putting an electic fan on it, but I think he's rethinking this. Oh by the way, he actually lives in Oakhurst, right outside of Tulsa.

treman03 · 06-29-2009, 03:44 PM

I could never get mine off by holding it. I had to get a long bar, put it on the nut and hit it with a hammer to break it loose. Sounds bad but it didn't hurt a thing. Electric fan worked great on it also.

**LEEVON** · 07-01-2009, 12:08 AM

Don't know how I came up with this but I've changed water pumps a few times on 5.3's and I always take a double-loop of rebar tie wire, wrap it through the fan pulley then around the water pump and remove the nut. Works like a charm!

Slammed67 · 09-25-2010, 05:53 PM

Quote:

Originally Posted by LEEVON

Don't know how I came up with this but I've changed water pumps a few times on 5.3's and I always take a double-loop of rebar tie wire, wrap it through the fan pulley then around the water pump and remove the nut. Works like a charm!

Thanks for the tip LEEVON. I just replaced my water pump gaskets and your trick worked like charm. However, I had use a quadruple-loop of wire because two strands kept breaking.

**truckdude239** · 09-25-2010, 08:19 PM

need a tool like this to hold pulley then the wrench for the fan bought ym set from snap on for 117 buxs come with pulley holder and 5 or 6 wrenchs for the fan clutchs

**Boog** · 09-26-2010, 12:00 PM

Having the right tool for the job is always better but not always practical for the shadetree to buy tools he may only use once. So we have to resort to improvisation. "necessity is the mother of invention" somebody once said.

**Thealien** · 09-26-2010, 01:31 PM

I took an 18 inch 1" X1/8" piece of steel I had laying around. I welded a bolt through at the end closer to one side. I place the bolt through one of the 4 holes in the pulley and use a wrench on the clutch fan hex. While turning the hex in the direction to remove the fan the flat stock will brace against the hex enough allowing you to break it free, once loose I remove the flat bar and you can remove it the rest of the way because the belt will hold the pulley enough for removal.

Worked for me anyway.

Shon · 10-04-2010, 03:37 PM

I just take my adjustable wrench, get it on the nut and wack with hammer. not to either side, straight down, loosens it and off it comes.

usmcchevy · 10-04-2010, 05:07 PM

Run to to the parts store and borrow the tool.

06-25-2009, 09:04 PM	#1
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	removing clutch fan from 5.3 I know this is kind of the wrong thread but i figured this was the best place. My buddy has a 02(i think) gmc sierra. He's trying to remove the clutch fan and he can't figure it out. I'm trying to help over the phone since he lives in Tulsa, Ok and I'm in Omaha, Ne. Any help would be great. Thanks.

06-25-2009, 09:20 PM	#2
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: removing clutch fan from 5.3 if he doesnt have the "tool" that keeps the waterpump pulley stationary......what he can do is -keep the serp. belt on -clamp some vice-grips on the waterpump pulley. -then rotate the fan clutch (to remove it)....the vice-grips will keep the pulley from spinning when it comes in-contact with the belt....what part of t-town?

06-26-2009, 02:31 AM	#3
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: removing clutch fan from 5.3 Cool thanks I'll let him know his options. I'm not sure if he's even gonna be removing it. He planned on putting an electic fan on it, but I think he's rethinking this. Oh by the way, he actually lives in Oakhurst, right outside of Tulsa.

06-29-2009, 03:44 PM	#4
treman03 Registered User Join Date: Apr 2009 Location: GA Posts: 134	Re: removing clutch fan from 5.3 I could never get mine off by holding it. I had to get a long bar, put it on the nut and hit it with a hammer to break it loose. Sounds bad but it didn't hurt a thing. Electric fan worked great on it also.

07-01-2009, 12:08 AM	#5
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: removing clutch fan from 5.3 Don't know how I came up with this but I've changed water pumps a few times on 5.3's and I always take a double-loop of rebar tie wire, wrap it through the fan pulley then around the water pump and remove the nut. Works like a charm! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

09-25-2010, 08:19 PM	#7
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: removing clutch fan from 5.3 need a tool like this to hold pulley then the wrench for the fan bought ym set from snap on for 117 buxs come with pulley holder and 5 or 6 wrenchs for the fan clutchs Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

09-26-2010, 12:00 PM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: removing clutch fan from 5.3 Having the right tool for the job is always better but not always practical for the shadetree to buy tools he may only use once. So we have to resort to improvisation. "necessity is the mother of invention" somebody once said. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

09-26-2010, 01:31 PM	#9
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: removing clutch fan from 5.3 I took an 18 inch 1" X1/8" piece of steel I had laying around. I welded a bolt through at the end closer to one side. I place the bolt through one of the 4 holes in the pulley and use a wrench on the clutch fan hex. While turning the hex in the direction to remove the fan the flat stock will brace against the hex enough allowing you to break it free, once loose I remove the flat bar and you can remove it the rest of the way because the belt will hold the pulley enough for removal. Worked for me anyway. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-04-2010, 03:37 PM	#10
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: removing clutch fan from 5.3 I just take my adjustable wrench, get it on the nut and wack with hammer. not to either side, straight down, loosens it and off it comes. __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

10-04-2010, 05:07 PM	#11
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: removing clutch fan from 5.3 Run to to the parts store and borrow the tool. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.