67-72 parts for sale, some NOS - Central PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 06-26-2009, 02:58 PM

Starting to get my extra parts around for carlisle truck show... Can deliver to Indiana, upstate NY, Nashville, Hunstville or Carlisle, PA shows.

Otherwise shipping is at your cost.

NOS drivers burb/panel (or with modifications a blazer/truck) door - $800 (window hoop could be changed out for a truck or cut for a blazer)
NOS 69-72 under dash harness, warning lights - $250
NOS black bed wood - SOLD
Powdercoated fixed mounted fan with spacer - $25
4x4 ramhorn manifolds - $40 driver has alt mount
67-68 steel grille trim rings - $40
NOS 67-68 polished trim ring (only 1), some shelf wear but nice driver quality - $50
67-68 hood - $75
4x4 6 lug rally rims w/trim has 32" BFG AT's (poor to bad tread) $125 set of 4

more parts to come..

reply in thread please, pics available as needed.
Thanks..

**michael bustamante** · 06-26-2009, 03:06 PM

can I see pics of the 67-68 trim rings

**DANTIP** · 06-26-2009, 09:21 PM

I am interested in the door and bed wood. What side is the door (DS or PS)? Is the bed wood complete? Photos? Thanks! Would need to work out Indiana delivery.

msgross · 06-26-2009, 10:15 PM

Quote:

Originally Posted by michael bustamante

can I see pics of the 67-68 trim rings

I'll get some tomorrow.. I know that there is one little ding in one of them...

Quote:

Originally Posted by DANTIP

I am interested in the door and bed wood. What side is the door (DS or PS)? Is the bed wood complete? Photos? Thanks! Would need to work out Indiana delivery.

sorry bout that, driver door.

Bed wood is complete for a short or long stepside, short or long fleetside and has all the middle boards for a longhorn but not the long edge or wheel well boards. I can get the door to Indiana but i'm not sure that I can haul the bed wood since it's looong. I do have a trailer but i'm heading to Alabama after Indy and we would have to discuss the MPG issue that it will add. I need to clean the wood up, it's nice but dusty... only one small crack on one set of outer stepside boards. all the specs are here.
http://67-72chevytrucks.com/vboard/s...d.php?t=320780

**DANTIP** · 06-27-2009, 08:24 AM

Mike,

If we make a deal on the wood, I could pay you before transportation. Is it possible to have it cut-down to near short-bed/fleetside length before transportation? If it was shorter would it help your ability to transport?

Dan

msgross · 06-27-2009, 11:43 AM

Quote:

Originally Posted by DANTIP

Mike,

If we make a deal on the wood, I could pay you before transportation. Is it possible to have it cut-down to near short-bed/fleetside length before transportation? If it was shorter would it help your ability to transport?

Dan

Dan, I will be coming to Van Buren, IN (dads house) from 15-19 July and could possibly haul it like I did my hood. I have a roof mount that is flat and could strap them down to it. I can wrap them in plastic in case it rains. Can you come down to Van Buren? I can also leave it at my dads place until you are able to pick it up. I'll be heading south on the 19th.

Robert Paul Thomas · 06-27-2009, 06:07 PM

interested in the door if dan passes

msgross · 06-27-2009, 06:34 PM

Quote:

Originally Posted by Robert Paul Thomas

interested in the door if dan passes

Where in Ontario are you located? I will be in the Alex bay/Kingston area in the end of July or could leave it in Watertown,NY.

If Dan passes

msgross · 06-27-2009, 09:46 PM

ttt for Saturday night!!!

**DANTIP** · 06-27-2009, 10:00 PM

I am passing on the door but hope to make a deal on the wood.

Thanks!

Robert Paul Thomas · 06-28-2009, 07:47 AM

I'm on the border with Michigan, Sault Ste. Marie,...would you ship greyhound??

msgross · 06-28-2009, 08:18 AM

Quote:

Originally Posted by Robert Paul Thomas

I'm on the border with Michigan, Sault Ste. Marie,...would you ship greyhound??

wow, you are way up there.. It would be safer in a wooden crate, which I could make, and I can ship greyhound if you are willing to pay the extra insurance. I live near the Lebanon, PA greyhound station if you want to figure shipping.

Robert Paul Thomas · 06-28-2009, 12:53 PM

it snowed this morning!! lol go ahead anf figure shipping thanks Rob

msgross · 06-28-2009, 01:14 PM

PM sent on the door shipping (looks to be approx $100 USD). I'll build a box for free to protect it though.

BTW,

It's 80F degrees here today and i'm working in the yard!

**DANTIP** · 06-28-2009, 01:15 PM

Mike,

Do we have a deal on the wood kit?

Dan

msgross · 06-28-2009, 01:17 PM

Quote:

Originally Posted by DANTIP

Mike,

Do we have a deal on the wood kit?

Dan

sure do, just sent you a PM...

**michael bustamante** · 06-29-2009, 09:33 AM

good deal on that kit there!
any luck with the trim rings pics yet?

msgross · 06-29-2009, 09:37 AM

Quote:

Originally Posted by michael bustamante

good deal on that kit there!
any luck with the trim rings pics yet?

crap, sorry bout that. i'll get them tonight...

FYI burb door is still for sale... wood is pending

**DANTIP** · 06-29-2009, 10:28 AM

Mike,

I can meet you in Van Buren. You choose the day and I'll try work my schedule to meet you there.

Thanks!

msgross · 06-29-2009, 10:35 AM

Quote:

Originally Posted by DANTIP

Mike,

I can meet you in Van Buren. You choose the day and I'll try work my schedule to meet you there.

Thanks!

PM sent with payment and contact info.. thanks.. see you in Indiana!

slategrove · 06-29-2009, 02:18 PM

Really interested in the Hood...still have it? If so, what's your travel schedule...know it's going to cost a lot to ship...but sure I can find someone close to where you'll be going, if I can't make it myself.

Thanks,

Slate

msgross · 06-29-2009, 02:59 PM

Quote:

Originally Posted by slategrove

Really interested in the Hood...still have it? If so, what's your travel schedule...know it's going to cost a lot to ship...but sure I can find someone close to where you'll be going, if I can't make it myself.

Thanks,

Slate

still have the hood, I have some pics to upload, it has one rust hole under the front nose support but looks pretty decent all over the rest...

if you know anyone coming up to Carlisle, PA shows then it could work out...

slategrove · 06-30-2009, 07:35 AM

Unfortunately, I'll have to pass on the hood.

Thanks

msgross · 07-01-2009, 09:27 PM

pics of the trim, sorry for the delay.. only one small ding that could be fixed pretty easily.. little surface rust on the backside which is normal. Nothing major wrong with them though...

**michael bustamante** · 07-06-2009, 09:50 AM

so the steel ones are paintable ones right? Im going to give your link to another member on here whose been looking for these.
Thank you.

06-26-2009, 02:58 PM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	67-72 parts for sale, some NOS - Central PA Starting to get my extra parts around for carlisle truck show... Can deliver to Indiana, upstate NY, Nashville, Hunstville or Carlisle, PA shows. Otherwise shipping is at your cost. NOS drivers burb/panel (or with modifications a blazer/truck) door - $800 (window hoop could be changed out for a truck or cut for a blazer) NOS 69-72 under dash harness, warning lights - $250 NOS black bed wood - SOLD Powdercoated fixed mounted fan with spacer - $25 4x4 ramhorn manifolds - $40 driver has alt mount 67-68 steel grille trim rings - $40 NOS 67-68 polished trim ring (only 1), some shelf wear but nice driver quality - $50 67-68 hood - $75 4x4 6 lug rally rims w/trim has 32" BFG AT's (poor to bad tread) $125 set of 4 more parts to come.. reply in thread please, pics available as needed. Thanks.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 07-06-2009 at 01:24 PM. Reason: updated details on door

06-26-2009, 03:06 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: 67-72 parts for sale, some NOS - Central PA can I see pics of the 67-68 trim rings __________________ 1967custom

06-26-2009, 09:21 PM	#3
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 67-72 parts for sale, some NOS - Central PA I am interested in the door and bed wood. What side is the door (DS or PS)? Is the bed wood complete? Photos? Thanks! Would need to work out Indiana delivery.

06-27-2009, 08:24 AM	#5
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 67-72 parts for sale, some NOS - Central PA Mike, If we make a deal on the wood, I could pay you before transportation. Is it possible to have it cut-down to near short-bed/fleetside length before transportation? If it was shorter would it help your ability to transport? Dan

06-27-2009, 06:07 PM	#7
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 67-72 parts for sale, some NOS - Central PA interested in the door if dan passes

06-27-2009, 09:46 PM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 67-72 parts for sale, some NOS - Central PA ttt for Saturday night!!! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-27-2009, 10:00 PM	#10
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 67-72 parts for sale, some NOS - Central PA I am passing on the door but hope to make a deal on the wood. Thanks!

06-28-2009, 07:47 AM	#11
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 67-72 parts for sale, some NOS - Central PA I'm on the border with Michigan, Sault Ste. Marie,...would you ship greyhound??

06-28-2009, 12:53 PM	#13
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 67-72 parts for sale, some NOS - Central PA it snowed this morning!! lol go ahead anf figure shipping thanks Rob

06-28-2009, 01:14 PM	#14
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 67-72 parts for sale, some NOS - Central PA PM sent on the door shipping (looks to be approx $100 USD). I'll build a box for free to protect it though. BTW, It's 80F degrees here today and i'm working in the yard! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-28-2009 at 01:24 PM.

06-28-2009, 01:15 PM	#15
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 67-72 parts for sale, some NOS - Central PA Mike, Do we have a deal on the wood kit? Dan

06-29-2009, 09:33 AM	#17
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: 67-72 parts for sale, some NOS - Central PA good deal on that kit there! any luck with the trim rings pics yet? __________________ 1967custom

06-29-2009, 10:28 AM	#19
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 67-72 parts for sale, some NOS - Central PA Mike, I can meet you in Van Buren. You choose the day and I'll try work my schedule to meet you there. Thanks!

06-29-2009, 02:18 PM	#21
slategrove Registered User Join Date: Apr 2009 Location: Normal, IL Posts: 138	Re: 67-72 parts for sale, some NOS - Central PA Really interested in the Hood...still have it? If so, what's your travel schedule...know it's going to cost a lot to ship...but sure I can find someone close to where you'll be going, if I can't make it myself. Thanks, Slate

06-30-2009, 07:35 AM	#23
slategrove Registered User Join Date: Apr 2009 Location: Normal, IL Posts: 138	Re: 67-72 parts for sale, some NOS - Central PA Unfortunately, I'll have to pass on the hood. Thanks



Register or Log In To remove these advertisements.

07-01-2009, 09:27 PM	#24
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 67-72 parts for sale, some NOS - Central PA pics of the trim, sorry for the delay.. only one small ding that could be fixed pretty easily.. little surface rust on the backside which is normal. Nothing major wrong with them though... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-06-2009, 09:50 AM	#25
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: 67-72 parts for sale, some NOS - Central PA so the steel ones are paintable ones right? Im going to give your link to another member on here whose been looking for these. Thank you. __________________ 1967custom

Register or Log In To remove these advertisements.