May I "HEAR" your motor/exhaust??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prostreetC-10 · 06-26-2009, 10:08 PM

I was just reading a post about a guy that just got his motor running and how good it sounded. I was thinking "don't tell me....let me hear it!!!!" I thought it would be great if people could post videos or sound clips of there motors or exhaust. What would be fun and funny is to not only hear the nasty cams but also the piece of craps that needed new mufflers about 10K miles ago. I'll go first and some of you have seen this. It's my 460 when I first fired it 2 years ago. Yeah...I know....little lifter tic but I took care of that when I went full roller rockers. Nothing special. Little comp 280H. What does yours sound like?????

P.S. Gotta really turn up the PC volume!!!!

[IMG]http://i120.photobucket.com/albums/o182/agent...

67ss&99ss · 06-26-2009, 10:20 PM

My 406. 1 3/4" dougs headers, 3" exhaust, x-pipe, dumped at the rear axle with 1 chamber flowmaster race mufflers.

View Video on FQuick

short cruise down the street after I put it in just taking it easy

View Video on FQuick

340 in my cuda. 1 5/8" hooker headers, 3" exhaust dumped with super 40s

View Video on FQuick

and my 99 LS1. 1 3/4" lonetube headers 2.5" exhaust, xpipe, dumped at rear axle with one chamber flowmaster race mufflers.

View Video on FQuick

i'll have one of the truck before long. putting a new engine in tomrrow.

prostreetC-10 · 06-26-2009, 10:24 PM

Now that is what I was talking about....you can't explain that in words!!!!!!!

Come one guys.....go get your video cameras and post em up!!!

Guess I also need to post the "one too many beers in the garage video!!!

[IMG]http://i120.photobucket.com/albums/o182/agent...

Bob 68327 · 06-26-2009, 10:27 PM

Mine 292/.510 cam and turbo mufflers . Now has flowmaster 40's on it guess I need a new video...

YouTube - 68 C-10 50th Anniversary

*Dylan · 06-26-2009, 10:31 PM

I just made a topic about this! I just fired my truck with the new engine in it for the first time today. No lopey cam here or mean sounding engine but I'm excited and want to post it every chance I get. Lol.

MOV00841.flv video by AndrewsDylan - Photobucket

prostreetC-10 · 06-26-2009, 10:33 PM

nice but it's gotta sound really mean with the 40's!

Bob 68327 · 06-26-2009, 10:33 PM

Sounds Great Dylan !! Keep at it you'll be drivin' it before you know it !! Bob

Bob 68327 · 06-26-2009, 10:35 PM

Quote:

Originally Posted by prostreetC-10

nice but it's gotta sound really mean with the 40's!

Yes it does and yes the police and my neighbors hate it !!! So I couldn't be happier

Bob

prostreetC-10 · 06-26-2009, 10:36 PM

[QUOTE=*Dylan;3382178]I just made a topic about this! I just fired my truck with the new engine in it for the first time today. No lopey cam here or mean sounding engine but I'm excited and want to post it every chance I get. Lol.

That little 6 sounds GREAT and I'm sorry.....I didn't see that link!!!

*Dylan · 06-26-2009, 11:13 PM

Haha, it's cool man! Mines just about my engine, this should be a good topic on everyone's motors!

Bishops Trucks · 06-27-2009, 12:54 AM

Hope I can make this work. It takes a few minutes before I start the truck up.

YouTube - My '71 Chevy 4X4

prostreetC-10 · 06-27-2009, 01:50 AM

I think I've seen that video before. That truck has a sweet exhaust note......real throaty!!!

Wilson_ · 06-27-2009, 04:50 AM

I have two about 1 day after the rebuild

first is open shortys

YouTube - 67 GMC

2nd is with the long tubes and first gen flowmaster 40's

YouTube - 67 GMC 2

mikajo39 · 06-27-2009, 05:08 PM

Got Mine running yesterday WOO!

YouTube - Power Crate 350 Camming open headers

the second one is smoky but alas my engine is not in dire straights its just header paint, that stuff stinks.

YouTube - First run open headers Yearone Power...

kevmic28 · 06-27-2009, 10:03 PM

1970 Gmc I just picked it up yesterday. Put on a new glasspack and short tube cause it was missing one. Ill probably cut the other one tomorrow and do the same to it. Any suggestions would be appreciated doesnt run the best yet and backfires. I changed the plugs today.

[IMG]http://i464.photobucket.com/albums/rr4/kevmic...

prostreetC-10 · 06-28-2009, 10:32 AM

Quote:

Originally Posted by mikajo39

Got Mine running yesterday WOO!
YouTube - Power Crate 350 Camming open headers

the second one is smoky but alas my engine is not in dire straights its just header paint, that stuff stinks.

YouTube - First run open headers Yearone Power Crate 350

You have 403hp through an auto trans to an open rear end with 3.08's?????

Holy Cow........that must spin that right tire 4 city blocks!!!! Thanks for the post. Sounds goooooood.

prostreetC-10 · 06-28-2009, 10:39 AM

Quote:

Originally Posted by kevmic28

1970 Gmc I just picked it up yesterday. Put on a new glasspack and short tube cause it was missing one. Ill probably cut the other one tomorrow and do the same to it. Any suggestions would be appreciated doesnt run the best yet and backfires. I changed the plugs today.

I normally don't really care for the sound of a glasspack but if you look at my video of me in the garage doing the burnout, you'll see just the end of my glasspack and the coat hanger looping around the trailing arm and holding it up. This was before my sweet little super 40 exhaust job. It had the longest I think (36") glasspacks they make and it sounded real good. I think the trick to glasspacks is to not run those little 18" ones. Those are the ones that have that annoying rap to them. The long ones give a real deep sound.

kevmic28 · 06-28-2009, 11:07 AM

Yeah its a temporary fix. I just needed to fix it to get it road worthy. Im thinking about cutting the other one down so they look similar Right now one pipe come out behind the rear wheel and the new one comes out behind the cab.

mikajo39 · 06-28-2009, 12:07 PM

Quote:

Originally Posted by prostreetC-10

You have 403hp through an auto trans to an open rear end with 3.08's?????

Holy Cow........that must spin that right tire 4 city blocks!!!! Thanks for the post. Sounds goooooood.

Haha well havent got it all hooked up yet that video is only 3 days old now. Going camping and why I get back I'll get it hooked up and see how it does

petey-pablo · 06-28-2009, 06:04 PM

Heres my 72 short bed with a 454 power plant flowtech headers and Summit 3inch Turbo Mufflers. The mufflers are on it now to keep the noise down, I will Later install QTP Electric cutouts & a Bullet Performance ProTurbo Round Muffler,That are waiting patiently in the garage. It's not a very good video but you can hear a sample of the exhaust. Sounds pretty good for Summit Brand Mufflers.

[IMG]http://i263.photobucket.com/albums/ii144/pete...

**FRENCHBLUE72** · 06-28-2009, 06:53 PM

YouTube - 454 fired up

Heres mine....

and an older clip

YouTube - 454

68Stepbed · 06-29-2009, 08:30 AM

Look here:
http://s221.photobucket.com/albums/d...lick68/videos/

**americanmusc1e** · 06-29-2009, 10:44 AM

my '70 with the new 388...startup right after the 30min break in--still needed some tuning

YouTube - 383 startup

the '49 chevy 3800.........with a '55 235 stovebolt 6.....all we did was change the plugs, points, condenser, and rebuild the carburetor

YouTube - 1949 chevrolet 3800 startup

prostreetC-10 · 06-29-2009, 12:31 PM

dig the 49....sounds like solid lifters!!!!

Bob 68327 · 06-29-2009, 10:54 PM

Here's a new one with the flowmaster 40's on it !!

YouTube - My 68's new mufflers!!

06-26-2009, 10:20 PM	#2
67ss&99ss Andy Join Date: Feb 2009 Location: Cleveland, GA Posts: 224	Re: May I "HEAR" your motor/exhaust??? My 406. 1 3/4" dougs headers, 3" exhaust, x-pipe, dumped at the rear axle with 1 chamber flowmaster race mufflers. View Video on FQuick short cruise down the street after I put it in just taking it easy View Video on FQuick 340 in my cuda. 1 5/8" hooker headers, 3" exhaust dumped with super 40s View Video on FQuick and my 99 LS1. 1 3/4" lonetube headers 2.5" exhaust, xpipe, dumped at rear axle with one chamber flowmaster race mufflers. View Video on FQuick i'll have one of the truck before long. putting a new engine in tomrrow. __________________ 1967 Camaro SS 406\|522hp/514ft lbs\|M20 Muncie\|3.73s\|Posi 1969 CST/10 383\|Aisin AR5 5 speed 1972 K5 350\|Turbo 350 4x4 2005 Duramax 2500HD 4x4

06-26-2009, 10:33 PM	#6
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: May I "HEAR" your motor/exhaust??? nice but it's gotta sound really mean with the 40's! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

06-26-2009, 10:33 PM	#7
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: May I "HEAR" your motor/exhaust??? Sounds Great Dylan !! Keep at it you'll be drivin' it before you know it !! Bob __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

06-26-2009, 10:36 PM	#9
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: May I "HEAR" your motor/exhaust??? [QUOTE=Dylan;3382178]I just made a topic about this! I just fired my truck with the new engine in it for the first time today. No lopey cam here or mean sounding engine but I'm excited and want to post it every chance I get. Lol. That little 6 sounds GREAT and I'm sorry.....I didn't see that link!!! __________________ A quick "pedalfest"* *Still getting loose (carb test)* 496 Initial fire up video!

06-26-2009, 11:13 PM	#10
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: May I "HEAR" your motor/exhaust??? Haha, it's cool man! Mines just about my engine, this should be a good topic on everyone's motors! __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

06-27-2009, 01:50 AM	#12
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: May I "HEAR" your motor/exhaust??? I think I've seen that video before. That truck has a sweet exhaust note......real throaty!!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

06-28-2009, 11:07 AM	#18
kevmic28 Registered User Join Date: Jun 2009 Location: Arlington Texas Posts: 602	Re: May I "HEAR" your motor/exhaust??? Yeah its a temporary fix. I just needed to fix it to get it road worthy. Im thinking about cutting the other one down so they look similar Right now one pipe come out behind the rear wheel and the new one comes out behind the cab.

06-29-2009, 08:30 AM	#22
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: May I "HEAR" your motor/exhaust??? Look here: http://s221.photobucket.com/albums/d...lick68/videos/ __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

06-29-2009, 12:31 PM	#24
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: May I "HEAR" your motor/exhaust??? dig the 49....sounds like solid lifters!!!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.