Interior is finally done! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beatcoaster · 06-28-2009, 04:07 PM

I have finally finished my interior after a 4 months of evenings and weekends. Before it was saddle brown/ivory/and original green. Now it is a charcoal gray with a heavy silver flake in it, with the accent panels being silver/aluminum.

Purchase Day: Not bad for $2200

Now gutting it, lots of wire wheel, naval jelly, rust inhibitor seal, primer, and paint to go...

Padding in, carpet in, vents and tube in, wiring for stereo, cig lighter, glove box light

Rebuilt and painted gauges, painted the inside cluster and added a new face, rewired dash for full gauges, new emblems, heater controls, trim rings, etc. Everything worked right off the bat

Beatcoaster · 06-28-2009, 04:08 PM

Polk db's in the dash - made a custom bracket for the (2) 5-1/4"'s to fit below stock dash grill(barely cleared top of stereo)

Polk mm690's in the doors

Amp wired in, sub boxes built, carpetted and installed, new seat cover, new seat belts, new visors, new dash pad, new pedal covers, etc...

Now on to the rest of it's issues....!

Botietruck · 06-28-2009, 04:12 PM

WOW!!! That looks good!!

**GR8-68** · 06-28-2009, 04:13 PM

fine job on the interior looks great

bigsnookmaster · 06-28-2009, 05:07 PM

Very Nice !

JWPOORE · 06-28-2009, 06:01 PM

Looks great! What did you use to paint the dash and doors? Did you strip it down to bare metal or paint over the color they were? I'm needing to do this myself and change from one color to another on my interior.

Beatcoaster · 06-28-2009, 06:15 PM

After all rust treatment I sanded the good areas with 400 and/or scruffed with scotchbrite pad. Then primed with Rustoleum gray primer(1-2 layers) and Rustoleum paint(2 layers) and cleared it (3 layer) - It's a rattle can masterpiece! The door skins were a pain with all those ridges.

FRENCHBLUE72 · 06-28-2009, 06:21 PM

Man the interior looks great...

PanelDeland · 06-28-2009, 06:39 PM

I did mine the same way a few years ag.I was just trying to get it cleaner looking so I didn't put in new carpet or seat covers.On some areas where it was tight quarters I used double ought steel wool to clean/prep the surface.It still looks as good as it did the day I finished it.

Andy4639 · 06-28-2009, 07:19 PM

Looking good man. It's great feeling knowing you did it yourself.

MrBlue · 06-28-2009, 07:31 PM

NICE Job! I really like the colors and the speaker install gives me some ideas.
How long did it take you to do the job?
Thanks
MrBlue

prostreetC-10 · 06-28-2009, 07:42 PM

Okay...I'm confused. What is up with that trans tunnel piece? I have never seem one that looks like that. I thought they were all just short or tall hump. Did you make that and if so then why? Thanks!

1967C20 · 06-28-2009, 09:58 PM

That looks awesome, man. Love the steering wheel.

kyull67 · 06-28-2009, 10:08 PM

nice work!

*vegaschevy* · 06-28-2009, 11:54 PM

Quote:

Originally Posted by prostreetC-10

Okay...I'm confused. What is up with that trans tunnel piece? I have never seem one that looks like that. I thought they were all just short or tall hump. Did you make that and if so then why? Thanks!

Did not notice that until you mentioned it. Your right, almost looks factory though. Weird....

interior looks GREAT though

prostreetC-10 · 06-28-2009, 11:56 PM

Yeah.....looks great I just want to know if he rolled those beads or what's going on and why.

I'm waiting............ ;oD

71meangreenc10 · 06-29-2009, 12:01 AM

Looks good,,,,,

Smitty

sson20s · 06-29-2009, 01:04 AM

looks good congrats

72BlckButy · 06-29-2009, 04:30 AM

Nice work!

OARNGESI · 06-29-2009, 05:24 AM

Really nice job

big_al_71 · 06-29-2009, 08:02 AM

Feels Great when you accomplish a task!!!

Very nice...

Ear Candy · 06-29-2009, 08:47 AM

arm51 · 06-29-2009, 09:02 AM

looks good

Beatcoaster · 06-29-2009, 09:53 AM

Prostreet - the trans tunnel is stock, I didn't do any metal work on it. The depressions almost appear to be something the factory did to strenthen the cab floor a bit. My truck was from the Fremont plant so perhaps they did things a bit different there than in some of the other plants? I could tell it was a stock floor as the seam glue matched throughout the cab and there were no welds/stock green color throughout...I used the small hump carpet and it fit pretty darn good. The truck is a 1/2 ton "custom camper" fleetside with a 307 v8/th350/3.07 gears - which seems like an odd camper combo to me, perhaps the original owner made the factory create something different.

prostreetC-10 · 06-29-2009, 10:02 AM

That is really weird. I'd like to, with your permission, take that one pick and to a thread to ask if anyone else has seen that. It looks like a low hump that someone flattened out. Hmmmm......don't get me wrong. This interior is sweet. That just caught my eye!

06-28-2009, 04:07 PM	#1
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Interior is finally done! I have finally finished my interior after a 4 months of evenings and weekends. Before it was saddle brown/ivory/and original green. Now it is a charcoal gray with a heavy silver flake in it, with the accent panels being silver/aluminum. Purchase Day: Not bad for $2200 Now gutting it, lots of wire wheel, naval jelly, rust inhibitor seal, primer, and paint to go... Padding in, carpet in, vents and tube in, wiring for stereo, cig lighter, glove box light Rebuilt and painted gauges, painted the inside cluster and added a new face, rewired dash for full gauges, new emblems, heater controls, trim rings, etc. Everything worked right off the bat

06-28-2009, 04:08 PM	#2
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Interior is finally done! Polk db's in the dash - made a custom bracket for the (2) 5-1/4"'s to fit below stock dash grill(barely cleared top of stereo) Polk mm690's in the doors Amp wired in, sub boxes built, carpetted and installed, new seat cover, new seat belts, new visors, new dash pad, new pedal covers, etc... Now on to the rest of it's issues....!

06-28-2009, 04:12 PM	#3
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: Interior is finally done! WOW!!! That looks good!! __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

06-28-2009, 04:13 PM	#4
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Interior is finally done! fine job on the interior looks great

06-28-2009, 05:07 PM	#5
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Interior is finally done! Very Nice ! __________________ greg http://community.webshots.com/user/68406Stepside

06-28-2009, 06:01 PM	#6
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: Interior is finally done! Looks great! What did you use to paint the dash and doors? Did you strip it down to bare metal or paint over the color they were? I'm needing to do this myself and change from one color to another on my interior. Last edited by JWPOORE; 06-28-2009 at 06:02 PM.

06-28-2009, 06:15 PM	#7
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Interior is finally done! After all rust treatment I sanded the good areas with 400 and/or scruffed with scotchbrite pad. Then primed with Rustoleum gray primer(1-2 layers) and Rustoleum paint(2 layers) and cleared it (3 layer) - It's a rattle can masterpiece! The door skins were a pain with all those ridges. Last edited by Beatcoaster; 06-28-2009 at 06:17 PM.

06-28-2009, 06:21 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Interior is finally done! Man the interior looks great... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-28-2009, 06:39 PM	#9
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Interior is finally done! I did mine the same way a few years ag.I was just trying to get it cleaner looking so I didn't put in new carpet or seat covers.On some areas where it was tight quarters I used double ought steel wool to clean/prep the surface.It still looks as good as it did the day I finished it. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

06-28-2009, 07:19 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Interior is finally done! Looking good man. It's great feeling knowing you did it yourself. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

06-28-2009, 07:31 PM	#11
MrBlue Registered User Join Date: May 2009 Location: Laporte, IN Posts: 167	Re: Interior is finally done! NICE Job! I really like the colors and the speaker install gives me some ideas. How long did it take you to do the job? Thanks MrBlue

06-28-2009, 07:42 PM	#12
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Interior is finally done! Okay...I'm confused. What is up with that trans tunnel piece? I have never seem one that looks like that. I thought they were all just short or tall hump. Did you make that and if so then why? Thanks! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

06-28-2009, 09:58 PM	#13
1967C20 Junior Member Join Date: Jun 2007 Location: China Grove, NC Posts: 122	Re: Interior is finally done! That looks awesome, man. Love the steering wheel. __________________ "A man's got to know his limitations." - Dirty Harry _______________________________________________ 1967 C20 Custom Camper, 327, Powerglide, PS, PB, No-Spin Locker

06-28-2009, 10:08 PM	#14
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Interior is finally done! nice work! __________________ The first '67 The current '67 '63 Biscayne

06-28-2009, 11:56 PM	#16
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Interior is finally done! Yeah.....looks great I just want to know if he rolled those beads or what's going on and why. I'm waiting............ ;oD __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!



Register or Log In To remove these advertisements.

06-29-2009, 12:01 AM	#17
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Interior is finally done! Looks good,,,,, Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

06-29-2009, 01:04 AM	#18
sson20s Registered User Join Date: Aug 2008 Location: el mirage,arizona Posts: 284	Re: Interior is finally done! looks good congrats __________________ 2 many ,want to finish 1

06-29-2009, 04:30 AM	#19
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Interior is finally done! Nice work! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-29-2009, 05:24 AM	#20
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Interior is finally done! Really nice job __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

06-29-2009, 08:02 AM	#21
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Interior is finally done! Feels Great when you accomplish a task!!! Very nice... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

06-29-2009, 08:47 AM	#22
Ear Candy Registered User Join Date: May 2009 Location: Burlington, NC Posts: 49	Re: Interior is finally done!

06-29-2009, 09:02 AM	#23
arm51 beer me Join Date: Jun 2009 Location: west frankfort illinois Posts: 129	Re: Interior is finally done! looks good __________________ 1969 c10 currently on hold because of a darn f**d 1986 f150 1986 silverado-my dads truck that i'm fixin up ill keep my freedom my guns my money my religion and you can keep your CHANGE-hank williams jr

06-29-2009, 09:53 AM	#24
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Interior is finally done! Prostreet - the trans tunnel is stock, I didn't do any metal work on it. The depressions almost appear to be something the factory did to strenthen the cab floor a bit. My truck was from the Fremont plant so perhaps they did things a bit different there than in some of the other plants? I could tell it was a stock floor as the seam glue matched throughout the cab and there were no welds/stock green color throughout...I used the small hump carpet and it fit pretty darn good. The truck is a 1/2 ton "custom camper" fleetside with a 307 v8/th350/3.07 gears - which seems like an odd camper combo to me, perhaps the original owner made the factory create something different.

06-29-2009, 10:02 AM	#25
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Interior is finally done! That is really weird. I'd like to, with your permission, take that one pick and to a thread to ask if anyone else has seen that. It looks like a low hump that someone flattened out. Hmmmm......don't get me wrong. This interior is sweet. That just caught my eye! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video! Last edited by prostreetC-10; 06-29-2009 at 10:04 AM.

Register or Log In To remove these advertisements.