Members in the Atlanta Ga area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thecov71 · 07-13-2009, 08:44 AM

Looking for members in the Atlanta area that I could talk with and would like to see their projects so I know I'm doing things the right way. Thanks

chuckmc8 · 07-13-2009, 09:28 AM

sent pm

jsmithbm · 07-13-2009, 06:11 PM

Quote:

Originally Posted by chuckmc8

sent pm

I'm in Newnan, Have you checked out the State page?

PanelDeland · 07-13-2009, 06:50 PM

You might also check with member woogeroo.He used to get some "Meet and Greet " saturday lunches going.There are also quite a few shows in the Atlanta area.Check into the GSRA(Georgia Street Rod Association).

thecov71 · 07-13-2009, 07:11 PM

Hey guys wasn't ignoring anyone just had to get my son settled down.I have not looked into any of the shows yet I travel alot and also just moved to Ga.But looking forward to going and possiblly meeting some members.

jsmithbm · 07-13-2009, 07:21 PM

Quote:

Originally Posted by thecov71

Hey guys wasn't ignoring anyone just had to get my son settled down.I have not looked into any of the shows yet I travel alot and also just moved to Ga.But looking forward to going and possiblly meeting some members.

No problem.

Quote:

Originally Posted by PanelDeland

You might also check with member woogeroo.He used to get some "Meet and Greet " saturday lunches going.There are also quite a few shows in the Atlanta area.Check into the GSRA(Georgia Street Rod Association).

There is suppose to be a cruise in this weekend. Check the GA forum for details mayb thursday.
Thanks for the info as well on the GSRA>

ajcan · 07-14-2009, 05:36 PM

O.K Where is the GA forum?

AJ

jsmithbm · 07-14-2009, 05:56 PM

Quote:

Originally Posted by ajcan

O.K Where is the GA forum?

AJ

When at the Homepage for this website, scroll down towards the bottom. In the center of the page you will see the States listed. Click on GA and it will take you there. But i have included a link, so all you have to do is click on it.
http://67-72chevytrucks.com/vboard/f...play.php?f=153

ajcan · 07-14-2009, 07:04 PM

Thanks for the link.
When I saved this website to my favorites,I did so while on the page where you select which forum you wish to view.Therefor I don't see the front page.Thanks again.

AJ

jsmithbm · 07-14-2009, 07:06 PM

Quote:

Originally Posted by ajcan

Thanks for the link.
When I saved this website to my favorites,I did so while on the page where you select which forum you wish to view.Therefor I don't see the front page.Thanks again.

AJ

Sure no problem, I did the same the first time i save it as a favorite. Throw up some pics of the truck

ajcan · 07-14-2009, 07:20 PM

Here are a couple.
Nothing special 1970 C20 LWB.
One thing I can say for the truck is it has very little rust.
It has surface rust but only the rockers have 2 small holes.About pencil size and the core support is rotten.
Otherwise great.350 smokes but runs great.
Crate motor or rebuild next spring.
I will probably go crate as the motor in it is not original.
If the numbers matched I would build it.

AJ

thecov71 · 07-14-2009, 07:38 PM

Hey atleast all your panel's line up can't say that for mine.

jsmithbm · 07-14-2009, 08:28 PM

Nice looking truck!!!

leemer4 · 07-14-2009, 09:38 PM

I am here in Marietta, GA - Restoring a 72 short step from the ground up.

I'll get a photo up soon.

ajcan · 07-15-2009, 05:52 PM

Thanks for the compliment jsmith.

leemer4,can't wait to see the pictures.

AJ

69stepside4x4 · 07-15-2009, 08:59 PM

I'm over here in the Decatur/Oakhurst area, just behind Agnes Scott College and I work in midtown at GA Tech (I drive my '69 C10 4x4 to work daily).

ajcan · 07-15-2009, 09:23 PM

69stepside4x4,
My brother lives in Avondale and had my truck over the 4th of July holiday while I was in Florida.He drove my 70 every day and loved it.

AJ

leemer4 · 07-20-2009, 12:33 PM

Rolling 80% Done - Still to run exhaust, Fuel Tank & Lines

dznucks · 07-21-2009, 06:24 AM

I am in Smyrna.

I have a '69 SWB. Its my DD but its under construction. I am about to start my bag and Accuair install next month.

DuramaxC10 · 07-21-2009, 10:44 AM

Henry county here anyone in lagrange seen this truck

http://atlanta.craigslist.org/cto/1280362236.html

thecov71 · 07-21-2009, 02:33 PM

Hey Guys. I'm pretty new to the Georgia area and I'm going to be needing a machine shop pretty soon to do alittle head work and other things to my 305.Just wondering if anyone might have a favorite hookup.Thanks

dznucks · 01-14-2010, 11:26 AM

Lemer, nice build. Do you have an exhaust guy yet? I just had my exhaust redone at G&S muffler in marietta. I posted pics here.

http://67-72chevytrucks.com/vboard/s...d.php?t=380456

What engine are you using?

Hezie · 01-15-2010, 05:09 PM

Quote:

Originally Posted by thecov71

Hey Guys. I'm pretty new to the Georgia area and I'm going to be needing a machine shop pretty soon to do alittle head work and other things to my 305.Just wondering if anyone might have a favorite hookup.Thanks

Atlanta Speed Shop in Gainesville get's my stuff.

flashed · 01-16-2010, 12:20 AM

D and A machine shop in Canton is good too . I live in Canton Ga as well.

srea76 · 01-16-2010, 11:20 AM

would love to be closer to all you guys. I am down in southern Georgia about 3 1/2 hours south of ATL.

07-13-2009, 08:44 AM	#1
thecov71 Registered User Join Date: Jul 2009 Location: Snellville, Georgia Posts: 20	Members in the Atlanta Ga area Looking for members in the Atlanta area that I could talk with and would like to see their projects so I know I'm doing things the right way. Thanks

07-13-2009, 09:28 AM	#2
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Members in the Atlanta Ga area sent pm

07-13-2009, 06:50 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Members in the Atlanta Ga area You might also check with member woogeroo.He used to get some "Meet and Greet " saturday lunches going.There are also quite a few shows in the Atlanta area.Check into the GSRA(Georgia Street Rod Association). __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-13-2009, 07:11 PM	#5
thecov71 Registered User Join Date: Jul 2009 Location: Snellville, Georgia Posts: 20	Re: Members in the Atlanta Ga area Hey guys wasn't ignoring anyone just had to get my son settled down.I have not looked into any of the shows yet I travel alot and also just moved to Ga.But looking forward to going and possiblly meeting some members.

07-14-2009, 05:36 PM	#7
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: Members in the Atlanta Ga area O.K Where is the GA forum? AJ

07-14-2009, 07:04 PM	#9
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: Members in the Atlanta Ga area Thanks for the link. When I saved this website to my favorites,I did so while on the page where you select which forum you wish to view.Therefor I don't see the front page.Thanks again. AJ

07-14-2009, 07:20 PM	#11
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: Members in the Atlanta Ga area Here are a couple. Nothing special 1970 C20 LWB. One thing I can say for the truck is it has very little rust. It has surface rust but only the rockers have 2 small holes.About pencil size and the core support is rotten. Otherwise great.350 smokes but runs great. Crate motor or rebuild next spring. I will probably go crate as the motor in it is not original. If the numbers matched I would build it. AJ Attached Images

07-14-2009, 07:38 PM	#12
thecov71 Registered User Join Date: Jul 2009 Location: Snellville, Georgia Posts: 20	Re: Members in the Atlanta Ga area Hey atleast all your panel's line up can't say that for mine. Last edited by thecov71; 07-14-2009 at 07:38 PM.

07-14-2009, 08:28 PM	#13
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Members in the Atlanta Ga area Nice looking truck!!! __________________ Learning as I go! -------------------------------------

07-14-2009, 09:38 PM	#14
leemer4 Registered User Join Date: May 2009 Location: Marietta, GA Posts: 28	Re: Members in the Atlanta Ga area I am here in Marietta, GA - Restoring a 72 short step from the ground up. I'll get a photo up soon.

07-15-2009, 05:52 PM	#15
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: Members in the Atlanta Ga area Thanks for the compliment jsmith. leemer4,can't wait to see the pictures. AJ

07-15-2009, 08:59 PM	#16
69stepside4x4 Registered User Join Date: Mar 2005 Location: Atlanta, Georgia Posts: 32	Re: Members in the Atlanta Ga area I'm over here in the Decatur/Oakhurst area, just behind Agnes Scott College and I work in midtown at GA Tech (I drive my '69 C10 4x4 to work daily).

07-15-2009, 09:23 PM	#17
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: Members in the Atlanta Ga area 69stepside4x4, My brother lives in Avondale and had my truck over the 4th of July holiday while I was in Florida.He drove my 70 every day and loved it. AJ

07-20-2009, 12:33 PM	#18
leemer4 Registered User Join Date: May 2009 Location: Marietta, GA Posts: 28	Re: Members in the Atlanta Ga area Rolling 80% Done - Still to run exhaust, Fuel Tank & Lines Attached Images

07-21-2009, 06:24 AM	#19
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Members in the Atlanta Ga area I am in Smyrna. I have a '69 SWB. Its my DD but its under construction. I am about to start my bag and Accuair install next month.



Register or Log In To remove these advertisements.

07-21-2009, 10:44 AM	#20
DuramaxC10 Registered User Join Date: Jul 2009 Location: Mcdonough ,Ga Posts: 59	Re: Members in the Atlanta Ga area Henry county here anyone in lagrange seen this truck http://atlanta.craigslist.org/cto/1280362236.html

07-21-2009, 02:33 PM	#21
thecov71 Registered User Join Date: Jul 2009 Location: Snellville, Georgia Posts: 20	Re: Members in the Atlanta Ga area Hey Guys. I'm pretty new to the Georgia area and I'm going to be needing a machine shop pretty soon to do alittle head work and other things to my 305.Just wondering if anyone might have a favorite hookup.Thanks

01-14-2010, 11:26 AM	#22
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Members in the Atlanta Ga area Lemer, nice build. Do you have an exhaust guy yet? I just had my exhaust redone at G&S muffler in marietta. I posted pics here. http://67-72chevytrucks.com/vboard/s...d.php?t=380456 What engine are you using?

01-16-2010, 12:20 AM	#24
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Members in the Atlanta Ga area D and A machine shop in Canton is good too . I live in Canton Ga as well.

01-16-2010, 11:20 AM	#25
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Members in the Atlanta Ga area would love to be closer to all you guys. I am down in southern Georgia about 3 1/2 hours south of ATL.

Register or Log In To remove these advertisements.