2pcs NOS Woodgrain Moulding For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Field and Son · 07-15-2009, 10:25 AM

I have a couple extra pcs here for sale. Ist piece is for an 8 ft box. It is the passenger side in front of wheel well opening piece. Nice new old stock that has the typical plastic markings from package that will need to be polished off. Nice straight piec. $45 delivered in the US.

2nd Shorter piece does not fit anywhere on my truck. It looks to be a drivers side bed piece for in front of wheel well. I would think this is for a short box truck. One long thin scratch on top of trim as you can see. Still a great driver quality piece. $25 delivered.

Check the part numbers to be sure it fits what you need.

Field and Son · 07-15-2009, 10:26 AM

Shorter pice pics

BB72CHEVKT · 07-15-2009, 11:46 AM

I will take the SWB piece if it is correct. Checking now.

BB72CHEVKT · 07-15-2009, 11:52 AM

I am out looking for passenger side.

Field and Son · 07-15-2009, 12:11 PM

BB72CHEVKT, would you like me to get you the measurements for this??

BB72CHEVKT · 07-15-2009, 02:53 PM

Quote:

Originally Posted by Field and Son

BB72CHEVKT, would you like me to get you the measurements for this??

No thanks wrong side for me.

**too much stuff** · 07-15-2009, 06:01 PM

Can i got measurements on the short piece? Are you sure that part number/package is correct? Thanks, Eric

OldSkool71 · 07-15-2009, 07:31 PM

If the short one is for SWB drivers side in front of rear wheel I will take it.

thanks, Ron

OldSkool71 · 07-15-2009, 07:38 PM

Found this previous posting...according to this both number are for LWB?

http://67-72chevytrucks.com/vboard/s...d.php?t=320236

Field and Son · 07-15-2009, 08:39 PM

I cant be sure that this small piece is in the correct package as I have only had for about 6 months and its history is unknown. It does appear to fit correctly on the left side of a box as the bend on end fits properly with the angled end going toward the back of the truck. It measures 27 3/8" across the top and 25 3/4" across the bottom. Maybe short bed, suburban, blazer?? I only know it definately does not fit anywhere on my longbed truck.

70LonghornCST · 07-15-2009, 08:53 PM

Try this link. It will show that what you have is a Left hand lower front of wheel lower molding in a right side wrapper: http://www.parts123.com/PartFrame.as...ROLET PARTS CO

**too much stuff** · 07-15-2009, 09:02 PM

It appears to be a short bed drivers side front. That will work for me. Do you have paypal? Eric

Field and Son · 07-15-2009, 09:05 PM

Eric, Sending info via PM....Jay

Small piece sold to Eric...

**HOTFUN** · 07-15-2009, 09:20 PM

Dang missed again. Eric you must watch this board every minute of the day. Anyway I'm still hunting for the passenger door moulding.
Mark

OldSkool71 · 07-16-2009, 07:20 PM

Quote:

Originally Posted by HOTFUN

Dang missed again. Eric you must watch this board every minute of the day. Anyway I'm still hunting for the passenger door moulding.
Mark

.....

07-15-2009, 10:25 AM	#1
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	2pcs NOS Woodgrain Moulding For Sale I have a couple extra pcs here for sale. Ist piece is for an 8 ft box. It is the passenger side in front of wheel well opening piece. Nice new old stock that has the typical plastic markings from package that will need to be polished off. Nice straight piec. $45 delivered in the US. 2nd Shorter piece does not fit anywhere on my truck. It looks to be a drivers side bed piece for in front of wheel well. I would think this is for a short box truck. One long thin scratch on top of trim as you can see. Still a great driver quality piece. $25 delivered. Check the part numbers to be sure it fits what you need. Attached Images

07-15-2009, 10:26 AM	#2
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 2pcs NOS Woodgrain Moulding For Sale Shorter pice pics Attached Images

07-15-2009, 11:46 AM	#3
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 2pcs NOS Woodgrain Moulding For Sale I will take the SWB piece if it is correct. Checking now. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 07-15-2009 at 11:46 AM.

07-15-2009, 11:52 AM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 2pcs NOS Woodgrain Moulding For Sale I am out looking for passenger side. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

07-15-2009, 12:11 PM	#5
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 2pcs NOS Woodgrain Moulding For Sale BB72CHEVKT, would you like me to get you the measurements for this??

07-15-2009, 06:01 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 2pcs NOS Woodgrain Moulding For Sale Can i got measurements on the short piece? Are you sure that part number/package is correct? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2009, 07:31 PM	#8
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: 2pcs NOS Woodgrain Moulding For Sale If the short one is for SWB drivers side in front of rear wheel I will take it. thanks, Ron __________________ -Ron-

07-15-2009, 07:38 PM	#9
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: 2pcs NOS Woodgrain Moulding For Sale Found this previous posting...according to this both number are for LWB? http://67-72chevytrucks.com/vboard/s...d.php?t=320236 __________________ -Ron- Last edited by OldSkool71; 07-15-2009 at 07:39 PM.

07-15-2009, 08:39 PM	#10
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 2pcs NOS Woodgrain Moulding For Sale I cant be sure that this small piece is in the correct package as I have only had for about 6 months and its history is unknown. It does appear to fit correctly on the left side of a box as the bend on end fits properly with the angled end going toward the back of the truck. It measures 27 3/8" across the top and 25 3/4" across the bottom. Maybe short bed, suburban, blazer?? I only know it definately does not fit anywhere on my longbed truck.

07-15-2009, 08:53 PM	#11
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 2pcs NOS Woodgrain Moulding For Sale Try this link. It will show that what you have is a Left hand lower front of wheel lower molding in a right side wrapper: http://www.parts123.com/PartFrame.as...ROLET PARTS CO __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 07-15-2009 at 08:54 PM.

07-15-2009, 09:02 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 2pcs NOS Woodgrain Moulding For Sale It appears to be a short bed drivers side front. That will work for me. Do you have paypal? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2009, 09:05 PM	#13
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 2pcs NOS Woodgrain Moulding For Sale Eric, Sending info via PM....Jay Small piece sold to Eric... Last edited by Field and Son; 07-15-2009 at 09:10 PM. Reason: sold

07-15-2009, 09:20 PM	#14
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,149	Re: 2pcs NOS Woodgrain Moulding For Sale Dang missed again. Eric you must watch this board every minute of the day. Anyway I'm still hunting for the passenger door moulding. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 factory #'s V8 stepside project '72 Cheyenne K20 50k original '72 CST Blazer K5 owned 30+yrs '73 Sierra swb 4x4 '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.