Frame Cleaning Solution found!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69_C10 · 07-20-2009, 10:04 AM

Greetings Gearhead Collegues...
While tearing down my baby I was dreading the ineviatble frame cleaning and detailing. I read a couple of threads about oven cleaner from the dollar store. I was in extreme doubt about using this on my frame and the power it would have aginst 40 years worth of grease oil, grime, salt, etc, etc.

This stuff works wonders!!! I had a very thick build up of "funk" all over the frame from leaks from everywhere literally. I caoted the entire frame with the oven cleaner..(3 cans) and let it sit and work for 1 1/2 hours. I fired up my pressure washer and actually sprayed the frame clean!!! I was in awe at the power of the oven cleaner. Now I'm down to business on blasting my frame and finishing it off by primer and paint.

All of that cost me $3.00 and a little water. I figure some guys projects might be at the same status as mine and looking for a cheap frame cleaning solution and wanted to pass along for what it's worth.

Keep the projects going..

**kev2809** · 07-20-2009, 10:14 AM

nice, you take any pics by any chance?

au03z71 · 07-20-2009, 11:16 AM

Sounds like a winner! Any particular brand of oven cleaner?

*Shane* · 07-20-2009, 11:22 AM

the cheaper the brand the better ... Dollar General store brand works awesome ... be sure to wear gloves and eye protection

SCOTI · 07-20-2009, 11:58 AM

Quote:

Originally Posted by Shane

.....be sure to wear gloves and eye protection

Definitely true words of wisdom. Outside breeze will easily carry this stuff. If it gets in your eyes or on your skin, you'll be very uncomfortable for several minutes @ the minimum.

au03z71 · 07-20-2009, 12:15 PM

Quote:

Originally Posted by SCOTI

Definitely true words of wisdom. Outside breeze will easily carry this stuff. If it gets in your eyes or on your skin, you'll be very uncomfortable for several minutes @ the minimum.

That's a fact. It's not too easy on paint jobs either.

69_C10 · 07-20-2009, 08:36 PM

Hi Gents,
I took a couple of after pics when I used the oven cleaner. I didn't have the forethought to take any before pics but, believe me, it was absolutely funkified with grease, grime, and nastiness. The oven cleaner is from the Dollar Store and is nothing short of amazing. 1 application did the trick (3 cans) did the entire frame. Followed by a pressure washer and presto, ready to blast, prime and paint.

Thanks,
Mark Ingle
Asheville, NC

originalJD · 07-22-2009, 01:10 PM

Yes, this stuff works wonders. I recently used it on my latest project thinking it could never work and it did better that anything else I've tried. And gloves are an absolute MUST to use. My finger tips especially around my nails were soooo chemical burnt it was rediculous. I always have to learn the hard way it seems.

royo · 07-22-2009, 02:28 PM

Try not to get it on aluminum for very long

retodd7711 · 07-22-2009, 07:58 PM

Also works great for de-greasing motors.
Does a kick azz job on a dirty BBQ grille too!

*Shane* · 07-22-2009, 08:17 PM

Never had it to be harmful to aluminum ... the anodizing on the other hand will be removed.

Skirkpat · 07-22-2009, 11:22 PM

I would suggest at the very least a dust mask, but next time I am getting out the paint respirator...I got a good lungfull the other day,it's not alot of fun. But I did get the engine bay clean"er"

72BlckButy · 07-22-2009, 11:36 PM

There's also Simple Green... it works!

highschoolbuilder · 07-28-2009, 11:52 AM

Does. It workfor. Rust?

69_C10 · 07-28-2009, 09:02 PM

Quote:

Originally Posted by highschoolbuilder

Does. It workfor. Rust?

It left the rough rusty spots but, you'll be impressed with it.

highschoolbuilder · 07-29-2009, 01:07 AM

I have a good amount of surface rust. Any tips?

my67chevytruck · 08-01-2009, 12:10 AM

Quote:

Originally Posted by highschoolbuilder

I have a good amount of surface rust. Any tips?

sand, and then paint with por-15

highschoolbuilder · 08-01-2009, 05:21 PM

as in sand it? or sand blast it?

POPO1984 · 08-01-2009, 08:53 PM

Sand Blast would be the best

highschoolbuilder · 08-02-2009, 11:55 PM

okay any thread you can direct me to that would help on the art of sand blasting? haha

au03z71 · 08-03-2009, 07:15 AM

Quote:

Originally Posted by highschoolbuilder

okay any thread you can direct me to that would help on the art of sand blasting? haha

I'd do a search for one. It seems like somebody posts one up in the paint and body section on a monthly basis. Also, there is a nozzle that you can put on a pressure washer that basically acts as a jet-pump and you can use it to sand-blast just about anything. The only down-side to it is wasted sand...but sand is relatively cheap.

69_C10 · 08-04-2009, 10:04 AM

Quote:

Originally Posted by highschoolbuilder

okay any thread you can direct me to that would help on the art of sand blasting? haha

Hi highschoolbuilder, I was going to buy a sandblaster and learn this myself but, when I looked into te cost of the blaster, sand, and making a huge mess to clean up afterward. I called some shops and found that they would actually blast and prime the frame for a third of what I would spend doing myself. No brainer right??

Food for thought....good luck on your project.

highschoolbuilder · 08-04-2009, 01:46 PM

what type of shop should i look for and what price should i look to spend?

69_C10 · 08-04-2009, 03:34 PM

Quote:

Originally Posted by highschoolbuilder

what type of shop should i look for and what price should i look to spend?

Just to give you an idea, to blast my frame he was going to charge between $150 and $200. That was the best deal I found. Most shops was going to charge between $80 and $90 per hour. I like the flat rate better, no surprises at time to pay you know.

highschoolbuilder · 08-04-2009, 03:44 PM

okay. sounds good. can they just paint it with a black gloss after the prime. and if so will it be that much more expensive? and can they do just the back of the frame. i know it sounds weird but im doing a daily driver build and i took off the bed to replace the bed and im just doing that part right now.

07-20-2009, 10:04 AM	#1
69_C10 Doing it my damn self..... Join Date: Jan 2008 Location: Asheville, NC Posts: 82	Frame Cleaning Solution found!!!! Greetings Gearhead Collegues... While tearing down my baby I was dreading the ineviatble frame cleaning and detailing. I read a couple of threads about oven cleaner from the dollar store. I was in extreme doubt about using this on my frame and the power it would have aginst 40 years worth of grease oil, grime, salt, etc, etc. This stuff works wonders!!! I had a very thick build up of "funk" all over the frame from leaks from everywhere literally. I caoted the entire frame with the oven cleaner..(3 cans) and let it sit and work for 1 1/2 hours. I fired up my pressure washer and actually sprayed the frame clean!!! I was in awe at the power of the oven cleaner. Now I'm down to business on blasting my frame and finishing it off by primer and paint. All of that cost me $3.00 and a little water. I figure some guys projects might be at the same status as mine and looking for a cheap frame cleaning solution and wanted to pass along for what it's worth. Keep the projects going.. __________________ Mark... *Project 69 Stepside*...http://67-72chevytrucks.com/vboard/s...d.php?t=290761 69 C10 Stepper - Current Build 94 Silverado - Driver 05 Hummer H2 - Unique Whip

07-20-2009, 10:14 AM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Frame Cleaning Solution found!!!! nice, you take any pics by any chance?

07-20-2009, 11:16 AM	#3
au03z71 Registered User Join Date: Jul 2006 Location: alabama Posts: 647	Re: Frame Cleaning Solution found!!!! Sounds like a winner! Any particular brand of oven cleaner?

07-20-2009, 11:22 AM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Frame Cleaning Solution found!!!! the cheaper the brand the better ... Dollar General store brand works awesome ... be sure to wear gloves and eye protection

07-20-2009, 08:36 PM	#7
69_C10 Doing it my damn self..... Join Date: Jan 2008 Location: Asheville, NC Posts: 82	Re: Frame Cleaning Solution found!!!! Hi Gents, I took a couple of after pics when I used the oven cleaner. I didn't have the forethought to take any before pics but, believe me, it was absolutely funkified with grease, grime, and nastiness. The oven cleaner is from the Dollar Store and is nothing short of amazing. 1 application did the trick (3 cans) did the entire frame. Followed by a pressure washer and presto, ready to blast, prime and paint. Thanks, Mark Ingle Asheville, NC Attached Images __________________ Mark... *Project 69 Stepside*...http://67-72chevytrucks.com/vboard/s...d.php?t=290761 69 C10 Stepper - Current Build 94 Silverado - Driver 05 Hummer H2 - Unique Whip

07-22-2009, 01:10 PM	#8
originalJD James Join Date: May 2008 Location: Dayton, WA Posts: 455	Re: Frame Cleaning Solution found!!!! Yes, this stuff works wonders. I recently used it on my latest project thinking it could never work and it did better that anything else I've tried. And gloves are an absolute MUST to use. My finger tips especially around my nails were soooo chemical burnt it was rediculous. I always have to learn the hard way it seems. __________________ Never crush'em. Restor'em or recycle'em. The payoff is always worth it in the end. http://viewmorepics.myspace.com/inde...lbumId=1709080 http://s258.photobucket.com/albums/h...e_top_view_all

07-22-2009, 02:28 PM	#9
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: Frame Cleaning Solution found!!!! Try not to get it on aluminum for very long __________________ nickle and dime

07-22-2009, 07:58 PM	#10
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: Frame Cleaning Solution found!!!! Also works great for de-greasing motors. Does a kick azz job on a dirty BBQ grille too! __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

07-22-2009, 08:17 PM	#11
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Frame Cleaning Solution found!!!! Never had it to be harmful to aluminum ... the anodizing on the other hand will be removed.

07-22-2009, 11:22 PM	#12
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Frame Cleaning Solution found!!!! I would suggest at the very least a dust mask, but next time I am getting out the paint respirator...I got a good lungfull the other day,it's not alot of fun. But I did get the engine bay clean"er" __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

07-22-2009, 11:36 PM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Frame Cleaning Solution found!!!! There's also Simple Green... it works! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-28-2009, 11:52 AM	#14
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! Does. It workfor. Rust?

07-29-2009, 01:07 AM	#16
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! I have a good amount of surface rust. Any tips?

08-01-2009, 05:21 PM	#18
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! as in sand it? or sand blast it?

08-01-2009, 08:53 PM	#19
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: Frame Cleaning Solution found!!!! Sand Blast would be the best __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84



Register or Log In To remove these advertisements.

08-02-2009, 11:55 PM	#20
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! okay any thread you can direct me to that would help on the art of sand blasting? haha

08-04-2009, 01:46 PM	#23
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! what type of shop should i look for and what price should i look to spend?

08-04-2009, 03:44 PM	#25
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Frame Cleaning Solution found!!!! okay. sounds good. can they just paint it with a black gloss after the prime. and if so will it be that much more expensive? and can they do just the back of the frame. i know it sounds weird but im doing a daily driver build and i took off the bed to replace the bed and im just doing that part right now.

Register or Log In To remove these advertisements.