CPP Trailing Arm Crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 07-23-2009, 09:09 AM

I have a brand new never used trailing arm cross member that I bought a couple of years ago but never used. I still have all of the original hardware and instructions. I had bought it with the intentions of modifying it to work with my '83 truck but I have decided to make a custom tubular crossmember.
How about $150 plus shipping.
Please post a reply in this thread prior to sending a PM. Thanks

CPP P/N: 6372LDL
CPP Info:
"Specially designed for trucks with a 5" or more drop. This crossmember is made from 1/4" thick laser cut steel plate, the hoop design eliminates drive shaft interference on slammed trucks. The exhaust passages allow you to tuck your 3" dual exhaust up out of the way. It bolts up in the stock location and includes trailing arm mounts. No cutting or welding is required. Grade 8 hardware included and comes with a black powdercoat finish. Note: Works with one- or two-piece drive shafts."

**1971 GMC SHORTY** · 07-23-2009, 06:26 PM

how much shipped to 91340 thanks

ksbrktracer · 07-23-2009, 09:05 PM

how about shipped to 74112.........thanks

Wild83C10 · 07-23-2009, 09:41 PM

Quote:

Originally Posted by 1971 GMC SHORTY

how much shipped to 91340 thanks

I will do $190 shipped via UPS ground.

Wild83C10 · 07-23-2009, 09:43 PM

Quote:

Originally Posted by ksbrktracer

how about shipped to 74112.........thanks

I will do $180 shipped via UPS ground

*Shane* · 07-23-2009, 10:31 PM

quote shipping to 35613 please ...

Wild83C10 · 07-24-2009, 05:36 AM

Quote:

Originally Posted by Shane

quote shipping to 35613 please ...

$175 shipped

Wild83C10 · 07-24-2009, 09:28 PM

1971 GMC Shorty you interested?

If not what about you other guys?

ksbrktracer · 07-25-2009, 12:29 AM

PM sent with offer

51 68CHEVY · 07-25-2009, 09:57 PM

Where at in n.j. Are you for local pick up and do you have any trailing arms

*Shane* · 07-25-2009, 11:34 PM

Quote:

Originally Posted by Wild83C10

$175 shipped

I'll take it ... PM me your PayPal information and I'll send you some cash.

*Shane* · 08-04-2009, 10:05 PM

Got the crossmember today.

Thanks for the smooth & positive deal!

07-23-2009, 09:09 AM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	CPP Trailing Arm Crossmember I have a brand new never used trailing arm cross member that I bought a couple of years ago but never used. I still have all of the original hardware and instructions. I had bought it with the intentions of modifying it to work with my '83 truck but I have decided to make a custom tubular crossmember. How about $150 plus shipping. Please post a reply in this thread prior to sending a PM. Thanks CPP P/N: 6372LDL CPP Info: "Specially designed for trucks with a 5" or more drop. This crossmember is made from 1/4" thick laser cut steel plate, the hoop design eliminates drive shaft interference on slammed trucks. The exhaust passages allow you to tuck your 3" dual exhaust up out of the way. It bolts up in the stock location and includes trailing arm mounts. No cutting or welding is required. Grade 8 hardware included and comes with a black powdercoat finish. Note: Works with one- or two-piece drive shafts." __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

07-23-2009, 06:26 PM	#2
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: CPP Trailing Arm Crossmember how much shipped to 91340 thanks Last edited by 1971 GMC SHORTY; 07-23-2009 at 06:31 PM. Reason: missed spelled

07-23-2009, 09:05 PM	#3
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: CPP Trailing Arm Crossmember how about shipped to 74112.........thanks

07-23-2009, 10:31 PM	#6
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: CPP Trailing Arm Crossmember quote shipping to 35613 please ...

07-24-2009, 09:28 PM	#8
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: CPP Trailing Arm Crossmember 1971 GMC Shorty you interested? If not what about you other guys? __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

07-25-2009, 12:29 AM	#9
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: CPP Trailing Arm Crossmember PM sent with offer

07-25-2009, 09:57 PM	#10
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: CPP Trailing Arm Crossmember Where at in n.j. Are you for local pick up and do you have any trailing arms

08-04-2009, 10:05 PM	#12
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: CPP Trailing Arm Crossmember Got the crossmember today. Thanks for the smooth & positive deal!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.