Placeholder for DFW Mini-Meet WTB/WTS

[my67chevytruck]

This is a placeholder, for the soon to be scheduled DFW Mini-swapmeet and greet. Please Place WTB/ WTS items if you are planning to attend the DFW meet only.
link to the meeting thread :

http://67-72chevytrucks.com/vboard/s...d.php?t=354020

[bobvilla67]

Thanks Heath. Here is some of my WTB

the rear-most crossmember on the frame that has the hole for the taillight harness from a 2wd,if anyone has a frame they are cutting up.

Med-olive green glove box door in very good shape

67-70 front chrome bumper,have painted one to trade

72 driver side saddle arm rest

blue dash pad

[ratrod67]

I'm looking for a nice solid rustfree(as much as possible) rolling chassis. I already have a motor, tranny, wheels and tires, interior, ect. I just need a solid truck to put it all into. Must be 1/2 ton 2WD. Can be long or short bed. Good title and #'s is a MUST!

[lilred67]

Originally Posted by ratrod67

I'm looking for a nice solid rustfree(as much as possible) rolling chassis. I already have a motor, tranny, wheels and tires, interior, ect. I just need a solid truck to put it all into. Must be 1/2 ton 2WD. Can be long or short bed. Good title and #'s is a MUST!

do you need a cab with it or just a rolling chassis? i have a '71 1/2 ton 2wd lwb rolling chassis with/without a crappy cab. i have a clear '72 1/2 ton tx. title and vin plate!!!!!

[clos69]

Everyone...i am needing a 4row leakfree radiator for my non-ac blazer. I'll have a new Edle carb #1406 and a set of Heddman shortys for sale along with other mics stuff for sale or trade,thanks

[ratrod67]

Originally Posted by lilred67

do you need a cab with it or just a rolling chassis? i have a '71 1/2 ton 2wd lwb rolling chassis with/without a crappy cab. i have a clear '72 1/2 ton tx. title and vin plate!!!!!

Sorry I wasn't clear. I'm looking for a complete rustfree truck or truck body with no motor or transmission. If I find one with a motor that's fine but I have a fresh 540 and TH400 I plan on using. I just want something with MINIMAL rust and a straight bed floor.

[my67chevytruck]

Originally Posted by bobvilla67

Thanks Heath. Here is some of my WTB

the rear-most crossmember on the frame that has the hole for the taillight harness from a 2wd,if anyone has a frame they are cutting up.

Med-olive green glove box door in very good shape

I probably have the rear-most xmember, I will double check shortly.

[bobvilla67]

here are the parts I have for sale or trade.
the GMC grill is ok for a driver
gate is not bowed or rusted but has a small dent.
chrome rear bumper some dents
blk headliner good shape
72 pass side blk door panel,fair
blazer driver bedside
4x4 frame sections,spring hangers,crossmembers
72 blazer trailer hitch,not the receiver type.

let me now if anyone is interested and will bring to meet.

[Big-Blue]

BobVilla,
I may be interested in the grill. My Minnesota version leaves a little to be desired... Do you have any better pics of it?

What's the latest on when this is going to happen?

[14U2NV]

bobvilla67,

Still interested in the 72 blazer frame and bedside. I just left a message on your cellphone about meeting up to look at them.

Chad

[bobvilla67]

Big-blue,I can better pics on friday.Not sure if we have decided on the final location and time so we need everyone to chime in that will attend.Has anyone started a poll?

anyone else have parts they will post?you might have some parts one of us could use?

[Pastdue72]

I have a few parts from my 71.
Bench seat in my opinion in good shape. Have pics if interested.
Grill in driver quality. 2 or 3 minor dings and the insert has the piece broken where most reach in to open hood latch.
Gas tank from behind seat as well as two spares that mounted in bed fenders behind cab.
3 vent windows
drivers and passenger windows.
a couple sets of gauge clusters. One with plastic bezel slightly broken. All working before removed.

I am looking for a air ride compressor, a pair of inner fenderwells from fleetside in good condition, tailgate without rust, front bed panel minimal dents, and bed mount gas tank preferably alluminum.

[BB72CHEVKT]

Originally Posted by Pastdue72

I have a few parts from my 71.
Bench seat in my opinion in good shape. Have pics if interested.
Grill in driver quality. 2 or 3 minor dings and the insert has the piece broken where most reach in to open hood latch.
Gas tank from behind seat as well as two spares that mounted in bed fenders behind cab.
3 vent windows
drivers and passenger windows.
a couple sets of gauge clusters. One with plastic bezel slightly broken. All working before removed.

I am looking for a air ride compressor, a pair of inner fenderwells from fleetside in good condition, tailgate without rust, front bed panel minimal dents, and bed mount gas tank preferably alluminum.

What color is the seat? Was the gas tank from behind the seat in use when removed or had it been sitting with gas?

[clos69]

Originally Posted by Pastdue72

I have a few parts from my 71.
Bench seat in my opinion in good shape. Have pics if interested.
Grill in driver quality. 2 or 3 minor dings and the insert has the piece broken where most reach in to open hood latch.
Gas tank from behind seat as well as two spares that mounted in bed fenders behind cab.
3 vent windows
drivers and passenger windows.
a couple sets of gauge clusters. One with plastic bezel slightly broken. All working before removed.

I am looking for a air ride compressor, a pair of inner fenderwells from fleetside in good condition, tailgate without rust, front bed panel minimal dents, and bed mount gas tank preferably alluminum.

Jeremy,
Do you have any pics of the gauge bezels? I am mainly interested in the temp guage if it was working properly...pics and price please, thanks Carlos

[BB72CHEVKT]

Originally Posted by clos69

Everyone...i am needing a 4row leakfree radiator for my non-ac blazer. I'll have a new Edle carb #1406 and a set of Heddman shortys for sale along with other mics stuff for sale or trade,thanks

Sent PM about carb

[shaneschevys]

Originally Posted by bobvilla67

here are the parts I have for sale or trade.
the grill is ok for a driver
gate is not bowed or rusted but has a small dent.
chrome rear bumper some dents
blk headliner
72 pass side blk door panel,fair
1972 blazer 4x4 frame
blazer driver bedside
4x4 frame sections,spring hangers,crossmembers
72 blazer trailer hitch,not the receiver type.

let me now if anyone is interested and will bring to meet.

What do you want for the green tailgate? I have a buddy who just picked up a truck & needs a tailgate.

[FATE'S RIDE]

what do you want for carb?

[shaneschevys]

A few things I have to bring:
Tilt column
Tall tranny hump
Billet crank & water pump pulleys for a long water pump
Chrome upper alt bracket for long water pump
& more to be added later

I need a 72 only pass. door with no speaker hole or rust. Outer skin condition is not important.

[clos69]

Originally Posted by shaneschevys

A few things I have to bring:
Tilt column
Tall tranny hump
& more to be added later

I need a 72 only drivers door with no speaker hole or rust. Outer skin condition is not important.

Shane, how much you want for the tilt? Anything in trade?

[shaneschevys]

Originally Posted by clos69

Shane, how much you want for the tilt? Anything in trade?

I would like to get 250.00 for it. the main 2 things that i need are 72 passenger door & a dual plain 4 barrel aluminum intake for a small block.

[clos69]

Originally Posted by FATE'S RIDE

what do you want for carb?

PM sent

[dammitmitchell]

hello gentlemen, i have for grabs 2 extra sbc timing covers one with the "enlarged seal".. and a stock cam with low miles...\esed hood ninges.. r still in good condition.. i was just to lazy to clean up (you can HAVE THEM)
stock timing gear set.. (used, freebie)
basically i have extra parts u guys can have that i will bring...

>>>>>>>>>>>>>>>>>>
i could use a 8 boltx 15 in rim... just one.. so i can mount my extra tire as a spare...
it will be hard to clear the brakes with a 15 incher.. but i can really use it so im not scared of my lack of sparetire...

[bobvilla67]

Shane,pm returned
better pic of gate and grill

[muckyp]

I just bought a new project and need a good passenger door, swb bed and cowl.

[kevmic28]

I need a long stepside in decent rebuildable shape for a 70 GMC. I have a bench seat from a 70 GMC that is rought needs to be rebuilt but its free to anyone who wants it. Also could use a good 350 engine but will probably have mine rebuilt before the meet.