|
07-31-2009, 06:34 PM
|
#1 |
|
Registered User
Join Date: Nov 2006
Location: Arizona
Posts: 121
|
P/S idler arm swap?
I have a 66 short step I swapped the front cross member on from an 81 half ton. I need to find an idler arm that will work with the 81 center/drag link. What have you guys used? I did a search and came up empty. TIA!
|
|
|
|
07-31-2009, 06:42 PM
|
#2 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: P/S idler arm swap?
I used the later model idler arm too. Just clamp it into place and drill the two holes.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
07-31-2009, 07:32 PM
|
#3 |
|
Registered User
Join Date: Nov 2006
Location: Arizona
Posts: 121
|
Re: P/S idler arm swap?
So just eyeballing it get's it close enough??
|
|
|
|
|
07-31-2009, 08:27 PM
|
#4 |
|
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: P/S idler arm swap?
I've done two trucks that way without any problems. Just square it forward to back and level the center link in relation to the crossmember. Use C clamps to secure it to the frame and drill the two holes.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
08-01-2009, 11:12 PM
|
#5 | |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: P/S idler arm swap?
Just use your original idler and drag link as a reference. Take some measurements and position the newer one in the same position and then do as Tx Firefighter said, clamp it to the frame and drill your holes.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
08-02-2009, 12:16 AM
|
#6 |
|
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: P/S idler arm swap?
I just swapped a 71 crossmember and spindles under my 64, using all 71 tie rods and components including the 71 idler arm. And it is just like the boys have said before me , measure, clamp and drill away.
__________________
69 chevelle convertible 71-C-10 short-wide and low  64 C-10 custom shortbox "Bubba"s Recycling project" |
|
|
|
|
08-02-2009, 01:29 AM
|
#7 |
|
Registered User
Join Date: Nov 2006
Location: Arizona
Posts: 121
|
Re: P/S idler arm swap?
OK, thanks for the tips.
|
|
|
|
|
08-02-2009, 10:27 AM
|
#8 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: P/S idler arm swap?
I noticed that if you bolt up the steering box first it give you the right angle on the idler arm. Before I knew about the REZ kit I just drilled some holes and bolted up the steering box with some spacers. After I used the rez kit I had to redrill my idler arm again as it angled back about 1/2". I welded a piece of 1/8" metal to the back of the first hole I drilled and filled the hole back up and then drilled a new hole. can't have oblong holes holding the idler arm.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
