|
08-04-2009, 02:52 PM
|
#1 |
|
Junior Member
 Join Date: Aug 2009
Location: Manassas, Va
Posts: 60
|
Clutch fork problems
I have a '69 short bed 2WD truck. I got 350 small block with a muncie M21 trans. I got after market blowproof bellhousing but my stock truck clutch fork will not line up in center of hole for throwout bearing. Any suggestions here? If i need a different clutch fork what and where? Thanks guys!
|
|
|
|
08-04-2009, 03:00 PM
|
#2 |
|
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Clutch fork problems
67-69 Camaro, probably many passenger other passenger cars would work too.
There are 2 lengths of ball-stud lengths too. I did this 8 or 9 years ago, so the details are a little fuzzy. Did you use a dial indicator to align the bellhousing? |
|
|
|
|
08-04-2009, 07:59 PM
|
#3 |
|
Junior Member
Join Date: Aug 2009
Location: Manassas, Va
Posts: 60
|
Re: Clutch fork problems
Ok thanks. So a clutch fork from a 67-69 Camaro will work with my linkages and all?
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
