250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 08-04-2009, 08:00 PM

I have some rare 6 cyl. part for sale. IT fits 250's and 292's.
aluminum valve cover vgc to ex. cond. 245.00 DELIVERED CONUS
I DO NOT TAKE PAYPAL UNDER NO CIRCUMSTANCES

bob in tn.
423 384 8938

Flat 67 · 10-18-2009, 01:49 AM

Can you post some pics.............Flat67?

Capt Kurt · 04-13-2010, 11:36 PM

Would you happen th have the alt and power stering bracket`s
I need some thanks

**425HP409** · 07-15-2010, 02:48 PM

Is the Manifold and Valve Cover still available?
Charles

BCOWANWHEELS · 07-15-2010, 03:02 PM

all i have left is a aluminum valve cover and a new set of split headers

**425HP409** · 07-15-2010, 05:50 PM

How much for the Valve Cover, and could you send a picture of it?

BCOWANWHEELS · 07-15-2010, 08:26 PM

I HAVE A NEW OLD STOCK 292 3 BLOT, 2 1/2" EXHAUST PIPE CAST IRON MANIFOLD for $250.00 and the valve cover is 245.00 DELIVERED CONUS

dabruce15 · 10-25-2010, 01:32 PM

You mentioned split headers in one of your posts. Are you still selling these? Thanks.

BCOWANWHEELS · 10-25-2010, 01:37 PM

Yes, headman, new never bolted to a engine. 3 into 1 style. $300.00+ shipping
bob

RJGeister · 10-29-2010, 10:38 PM

Bob,
Do you have pics of the valve cover and the header?
Rich

BCOWANWHEELS · 10-30-2010, 02:24 PM

The headers are in my shop rafters 16ft high and i,am down in my hip. If your serious and ok with 300.00 then i,ll get them down for pictures. As far as the valve cover i have pic,s of it but i need a email; address to send theem too.
Bob

BCOWANWHEELS · 05-03-2011, 03:54 PM

Ttt

08-04-2009, 08:00 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	250&292 i-6 parts, alum. Valve cover I have some rare 6 cyl. part for sale. IT fits 250's and 292's. aluminum valve cover vgc to ex. cond. 245.00 DELIVERED CONUS I DO NOT TAKE PAYPAL UNDER NO CIRCUMSTANCES bob in tn. 423 384 8938 __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 05-05-2011 at 08:30 PM.

10-18-2009, 01:49 AM	#2
Flat 67 Junior Member Join Date: Sep 2005 Location: Fresno,California Posts: 224	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Can you post some pics.............Flat67?

04-13-2010, 11:36 PM	#3
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Would you happen th have the alt and power stering bracket`s I need some thanks

07-15-2010, 02:48 PM	#4
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Is the Manifold and Valve Cover still available? Charles __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

07-15-2010, 03:02 PM	#5
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold all i have left is a aluminum valve cover and a new set of split headers __________________ I BELIEVE IN JOHN 3:16

07-15-2010, 05:50 PM	#6
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold How much for the Valve Cover, and could you send a picture of it? __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

07-15-2010, 08:26 PM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold I HAVE A NEW OLD STOCK 292 3 BLOT, 2 1/2" EXHAUST PIPE CAST IRON MANIFOLD for $250.00 and the valve cover is 245.00 DELIVERED CONUS __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 05-03-2011 at 03:54 PM.

10-25-2010, 01:32 PM	#8
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold You mentioned split headers in one of your posts. Are you still selling these? Thanks. __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

10-25-2010, 01:37 PM	#9
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Yes, headman, new never bolted to a engine. 3 into 1 style. $300.00+ shipping bob __________________ I BELIEVE IN JOHN 3:16

10-29-2010, 10:38 PM	#10
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Bob, Do you have pics of the valve cover and the header? Rich

10-30-2010, 02:24 PM	#11
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold The headers are in my shop rafters 16ft high and i,am down in my hip. If your serious and ok with 300.00 then i,ll get them down for pictures. As far as the valve cover i have pic,s of it but i need a email; address to send theem too. Bob __________________ I BELIEVE IN JOHN 3:16

05-03-2011, 03:54 PM	#12
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250&292 i-6 parts, alum. Valve cover & 292 (2 1/2" ) exhaust manifold Ttt __________________ I BELIEVE IN JOHN 3:16



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.