'64-'66 Stainless Windshield Trim w/pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

terd ferguson · 08-06-2009, 06:40 PM

***SOLD PENDING FUNDS***

This is stainless windshield trim for the '64-'66 trucks. This is still really clean with one small ding up top near the middle. The ding is less than an inch and could be easily fixed with some patience and as long as you don't handle it like a gorilla. It's really not bad at all, just pushed down a tiny bit in that one spot. It's so minor you can barely see it in the pics, follow the light on the trim. Check out the pics...

The red arrow in the pics points to the ding. Everything else is perfect. The J hook is straight all the way around. The little clips to hide the seams are all there and perfect too. I barely cleaned it up for the pics. A little nevrdull will have this stuff blinding.

I need $125 shipped for this. Payment must be a USPS Money Order and shipping will be via USPS Priority Mail with Delivery Confirmation and appropriate Insurance. I'll ship the same day the funds arrive and send the buyer the Delivery Confirmation number for tracking purposes.

I love trades more than cash. I'm looking for a lower inner door patch panel for the driver side ('60-'63), lower outer door patch panels (2), new windshield rubber ('60-'63), metalflake steering wheel, or maybe something else I forgot I need.

Thanks for looking and thanks for this great forum.

terd ferguson · 08-08-2009, 04:58 PM

Alright, $100 shipped.

terd ferguson · 08-11-2009, 10:50 AM

Bump.

Make me an offer or trade me for a nice metalflake steering wheel, lower outer door patch panels, '60-'63 driver side inner lower door patch panel, chrome or stainless door sill trim, new '60-'63 windshield rubber, new '60-'63 door rubber, good fender driver or passenger, or a local welder to do some patch work.

Thanks again for looking.

terd ferguson · 08-14-2009, 10:10 AM

Bump. If it doesn't sell in a couple of days, it's going to auction.

1964C10 · 08-27-2009, 11:32 AM

Is it still available?

terd ferguson · 08-27-2009, 12:51 PM

Yes, it's still available.

1964C10 · 08-27-2009, 12:54 PM

I have a 64 long bed fleetside that originally didn't have it. It should fit right in as long as I get the correct rubber moulding right?

terd ferguson · 08-27-2009, 01:13 PM

Quote:

Originally Posted by 1964C10

I have a 64 long bed fleetside that originally didn't have it. It should fit right in as long as I get the correct rubber moulding right?

Yes, you'd need the windshield moulding with the slot in it for trim. Obviously, ou'd have to take your windshield out to install the rubber and trim. I don't know what order all that stuff gets installed though.

1964C10 · 08-27-2009, 05:45 PM

Cool, I'll take it! let me know how to pay.

terd ferguson · 08-27-2009, 08:09 PM

Quote:

Originally Posted by 1964C10

Cool, I'll take it! let me know how to pay.

PM inbound. Thanks very much.

08-06-2009, 06:40 PM	#1
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	'64-'66 Stainless Windshield Trim w/pics... *SOLD PENDING FUNDS* This is stainless windshield trim for the '64-'66 trucks. This is still really clean with one small ding up top near the middle. The ding is less than an inch and could be easily fixed with some patience and as long as you don't handle it like a gorilla. It's really not bad at all, just pushed down a tiny bit in that one spot. It's so minor you can barely see it in the pics, follow the light on the trim. Check out the pics... The red arrow in the pics points to the ding. Everything else is perfect. The J hook is straight all the way around. The little clips to hide the seams are all there and perfect too. I barely cleaned it up for the pics. A little nevrdull will have this stuff blinding. I need $125 shipped for this. Payment must be a USPS Money Order and shipping will be via USPS Priority Mail with Delivery Confirmation and appropriate Insurance. I'll ship the same day the funds arrive and send the buyer the Delivery Confirmation number for tracking purposes. I love trades more than cash. I'm looking for a lower inner door patch panel for the driver side ('60-'63), lower outer door patch panels (2), new windshield rubber ('60-'63), metalflake steering wheel, or maybe something else I forgot I need. Thanks for looking and thanks for this great forum. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 08-27-2009 at 08:13 PM.

08-08-2009, 04:58 PM	#2
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: '64-'66 Stainless Windshield Trim w/pics... Alright, $100 shipped. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-11-2009, 10:50 AM	#3
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: '64-'66 Stainless Windshield Trim w/pics... Bump. Make me an offer or trade me for a nice metalflake steering wheel, lower outer door patch panels, '60-'63 driver side inner lower door patch panel, chrome or stainless door sill trim, new '60-'63 windshield rubber, new '60-'63 door rubber, good fender driver or passenger, or a local welder to do some patch work. Thanks again for looking. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-14-2009, 10:10 AM	#4
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: '64-'66 Stainless Windshield Trim w/pics... Bump. If it doesn't sell in a couple of days, it's going to auction. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 09-16-2009 at 03:55 PM.

08-27-2009, 11:32 AM	#5
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: '64-'66 Stainless Windshield Trim w/pics... Is it still available? __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

08-27-2009, 12:51 PM	#6
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: '64-'66 Stainless Windshield Trim w/pics... Yes, it's still available. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-27-2009, 12:54 PM	#7
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: '64-'66 Stainless Windshield Trim w/pics... I have a 64 long bed fleetside that originally didn't have it. It should fit right in as long as I get the correct rubber moulding right? __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

08-27-2009, 05:45 PM	#9
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: '64-'66 Stainless Windshield Trim w/pics... Cool, I'll take it! let me know how to pay. __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.