69SBW fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69inmich · 08-10-2009, 10:28 AM

I am selling my 69 short bed . dont have time to finish and lost storage. Truck was taken apart 18 years ago, because of rust starting, Got put to the side and left for 18 years. It was a Texas truck till mid 80s then driven in mich as a daily driver.Heres the list

Bed : taken apart 100 % and rust repaired. Cut out few spolts on lips and welded new metel in. welded up bed post holes and tail lights . Flushed tailgate.. the inner and outer bedside are seperated , the floor had a little repair done and is in nice shape. all molding hole are welded up.. for the most part the bed is all bare metel.

Front clip is still on the truck and apears to be rust free all but the core support, its rusted under the batt. tray ,

The cab is in need of rockers and corners and mounts with I have . The pass. door is sweet the drivers has a little rust on the corner inside Not bad at all.

The truck starts and runs after sitting all this time. I was impressed
New radiator , brake master and batt. Located in michigan. Call 734 649 9293 for info and pics,, I dont grt to this board to often Thanks 2500.00 obo

69inmich · 08-10-2009, 10:35 AM

Its a staight 6, 3 on da tree sorry about Also have rallys that go with the truck 3 6 lugs and two 5 lugs with ring and caps , all have been sand blasted

**DREW67** · 08-10-2009, 12:06 PM

How are the cab supports?

**lks dcvn** · 08-10-2009, 12:18 PM

Will this be parted out if it doesn't sell complete - interested in pricing for the bed/tailgate...

69inmich · 08-10-2009, 12:42 PM

Quote:

Originally Posted by DREW67

How are the cab supports?

The front are weak but I have new

69inmich · 08-10-2009, 12:43 PM

Quote:

Originally Posted by lks dcvn

Will this be parted out if it doesn't sell complete - interested in pricing for the bed/tailgate...

No not planing to part it out at this time. I dont have the time

72BlckButy · 08-10-2009, 01:38 PM

Sorry to hear you won't be able to keep working on the project.

If you decide to part it out, I would be interested in a few different parts.

Good luck with the sale!

69inmich · 08-10-2009, 02:02 PM

This is 70k mile truck it needs to be finished,and driven It only needs frt. brake line and seat to be a driver.very solid truck

bowtie43 · 08-10-2009, 08:44 PM

also interested in box if you part thanks

69inmich · 08-10-2009, 09:53 PM

Quote:

Originally Posted by bowtie43

also interested in box if you part thanks

Someone need to come buy it and part it out, I do not have the time or the heart to part it out

72BlckButy · 08-11-2009, 08:23 PM

bttt....

69inmich · 08-13-2009, 05:00 PM

bump for a last ditch sale,, 2250.00
I will deliver for 80 cents a mile up to 400 miles

JDCUSTOMS · 08-13-2009, 08:52 PM

Ill buy the bed sides for 500 bucks cash money

69inmich · 08-13-2009, 11:14 PM

Quote:

Originally Posted by JDCUSTOMS

Ill buy the bed sides for 500 bucks cash money

no thanks

eamatatc · 08-15-2009, 12:57 AM

Id like to make a deal with you. please call 734 417 7743 not for me but to help you out. After 10 am please.

69inmich · 08-17-2009, 09:00 PM

I did replace all the brake lines front to back, tuned the motor up and drove it to my shop 5 miles away. still need to sell. Will help with delivery as much as possibly. Bump one last time.

bowtie43 · 08-17-2009, 09:11 PM

how much you want for the bed floor alone

69inmich · 08-17-2009, 09:24 PM

Quote:

Originally Posted by bowtie43

how much you want for the bed floor alone

2250.00 and you can have the rest of the truck for free lol... I am not parting it out. If it dont sell soon I will have to find a place to store it.

bowtie43 · 08-17-2009, 09:30 PM

aw thats a hell of a deal but i'm gonna have to pass lol thanks

**DANTIP** · 09-09-2010, 01:25 PM

Is the truck still available?

cypressbog · 09-09-2010, 01:44 PM

What is this doing on the 67-72 parts board if your not parting? Should be on the correct board.

**fine69** · 09-09-2010, 03:41 PM

Quote:

Originally Posted by cypressbog

What is this doing on the 67-72 parts board if your not parting? Should be on the correct board.

He is right.

Please move this to the Trucks For Sale section.

If not moved in 24 hours it will be deleted.

08-10-2009, 10:28 AM	#1
69inmich Registered User Join Date: Jun 2009 Location: milan mi Posts: 17	69SBW fleetside I am selling my 69 short bed . dont have time to finish and lost storage. Truck was taken apart 18 years ago, because of rust starting, Got put to the side and left for 18 years. It was a Texas truck till mid 80s then driven in mich as a daily driver.Heres the list Bed : taken apart 100 % and rust repaired. Cut out few spolts on lips and welded new metel in. welded up bed post holes and tail lights . Flushed tailgate.. the inner and outer bedside are seperated , the floor had a little repair done and is in nice shape. all molding hole are welded up.. for the most part the bed is all bare metel. Front clip is still on the truck and apears to be rust free all but the core support, its rusted under the batt. tray , The cab is in need of rockers and corners and mounts with I have . The pass. door is sweet the drivers has a little rust on the corner inside Not bad at all. The truck starts and runs after sitting all this time. I was impressed New radiator , brake master and batt. Located in michigan. Call 734 649 9293 for info and pics,, I dont grt to this board to often Thanks 2500.00 obo Attached Images Last edited by 69inmich; 08-10-2009 at 12:00 PM. Reason: addind pics

08-10-2009, 10:35 AM	#2
69inmich Registered User Join Date: Jun 2009 Location: milan mi Posts: 17	Re: 69SBW fleetside Its a staight 6, 3 on da tree sorry about Also have rallys that go with the truck 3 6 lugs and two 5 lugs with ring and caps , all have been sand blasted Attached Images Last edited by 69inmich; 08-10-2009 at 01:53 PM. Reason: add pics

08-10-2009, 12:06 PM	#3
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: 69SBW fleetside How are the cab supports? __________________ DREW67

08-10-2009, 12:18 PM	#4
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: 69SBW fleetside Will this be parted out if it doesn't sell complete - interested in pricing for the bed/tailgate...

08-10-2009, 01:38 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 69SBW fleetside Sorry to hear you won't be able to keep working on the project. If you decide to part it out, I would be interested in a few different parts. Good luck with the sale! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-10-2009, 02:02 PM	#8
69inmich Registered User Join Date: Jun 2009 Location: milan mi Posts: 17	Re: 69SBW fleetside This is 70k mile truck it needs to be finished,and driven It only needs frt. brake line and seat to be a driver.very solid truck

08-10-2009, 08:44 PM	#9
bowtie43 Registered User Join Date: Mar 2009 Location: mcbain, michigan Posts: 14	Re: 69SBW fleetside also interested in box if you part thanks

08-11-2009, 08:23 PM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 69SBW fleetside bttt.... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-13-2009, 05:00 PM	#12
69inmich Registered User Join Date: Jun 2009 Location: milan mi Posts: 17	Re: 69SBW fleetside bump for a last ditch sale,, 2250.00 I will deliver for 80 cents a mile up to 400 miles

08-13-2009, 08:52 PM	#13
JDCUSTOMS Registered User Join Date: May 2009 Location: san diego california Posts: 15	Re: 69SBW fleetside Ill buy the bed sides for 500 bucks cash money

08-15-2009, 12:57 AM	#15
eamatatc Registered User Join Date: Jul 2008 Location: Ypsilanti, Michigan Posts: 3	Re: 69SBW fleetside Id like to make a deal with you. please call 734 417 7743 not for me but to help you out. After 10 am please.

08-17-2009, 09:00 PM	#16
69inmich Registered User Join Date: Jun 2009 Location: milan mi Posts: 17	Re: 69SBW fleetside I did replace all the brake lines front to back, tuned the motor up and drove it to my shop 5 miles away. still need to sell. Will help with delivery as much as possibly. Bump one last time.

08-17-2009, 09:11 PM	#17
bowtie43 Registered User Join Date: Mar 2009 Location: mcbain, michigan Posts: 14	Re: 69SBW fleetside how much you want for the bed floor alone __________________ 1969 3/4 4X4 sold 1985 3/4 2wd beater sold 1971 1/2 4x4 shortbox cheyenne 350 auto traded for 1971 3/4 ton 4x4 flat black 350/4 speed traded for 1976 jimmy 350 auto 4x4 35 mickey thompsons -The Snowbogger

08-17-2009, 09:30 PM	#19
bowtie43 Registered User Join Date: Mar 2009 Location: mcbain, michigan Posts: 14	Re: 69SBW fleetside aw thats a hell of a deal but i'm gonna have to pass lol thanks __________________ 1969 3/4 4X4 sold 1985 3/4 2wd beater sold 1971 1/2 4x4 shortbox cheyenne 350 auto traded for 1971 3/4 ton 4x4 flat black 350/4 speed traded for 1976 jimmy 350 auto 4x4 35 mickey thompsons -The Snowbogger

09-09-2010, 01:25 PM	#20
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,888	Re: 69SBW fleetside Is the truck still available?



Register or Log In To remove these advertisements.

09-09-2010, 01:44 PM	#21
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 69SBW fleetside What is this doing on the 67-72 parts board if your not parting? Should be on the correct board.

Register or Log In To remove these advertisements.