|
08-12-2009, 09:12 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Hamilton, Ontario
Posts: 41
|
Hello from Ontario...
Hows it going? Adding another forum to the long list, so I'd thought I'd drop in and introduce myself.
I'm Zach. I'm 23 and work as a mechanic in Ontario, Canada. I've been a Ford guy most of my life, but I've always had a sweet spot for C-10's. My very first vehicle was a '79 C-10 that I spent every dime I had to get, only to have it lose all compression and end up sitting in my driveway for a couple years. It was sold, I was sad, but I moved on to other vehicles and other projects, most of my time was spent with modifying late 80's ford Crown Victorias, and I even went Japanese for a while. Nothing could replace that truck though... So, one day I was bored, so I started browsing the classic car section of Kijiji for no reason other than to kill some time, and then there it was. Funny story, I actually ran into the previous owner of this truck while at hockey earlier in the year, he caught me outside drooling over it. He had bought the '75 cab allready chopped with the floors/cab corners and rockers replaced, and used an '81 frame/bed that had allready been lowered with all Belltech stuff, and built it from the frame up. The build is a little rough around the edges (for example, the centre console is made out of an old flower planter), but it should be coming apart this winter to have everything re-done. This up-coming weekend I will be starting the teardown, and then the fun will begin. Aiming to have it completed for next spring.... Anyways, enjoy the pictures (even though they are crummy, my camera is dying), there will be alot more coming....  Truck that started it all  The new project....   Some of the body panel fitments are off as you can see, and the drivers side door pins need replacing..      The tired, craptacular 305. If its not to far worn out, it will be getting a minor rebuild over the winter so I can use it next season until I can save up enough for a crate engine... [img]http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs136.snc1/5840_232583285386_896360386_8237167_5952455_n.jpg[/img I'd like to raise it up a bit in the front so I can get some fender liners back in, looks weird without them...  Crummy interior shot, featuring mystery buckets, flower planter centre console and massive shifter for the tired TH350. Interior is the first thing that is getting torn apart... Well, thats it for now. All suggestions, opinions and thoughts, good or bad, are welcome. Stay tuned for more in the coming months... |
|
|
|
08-12-2009, 11:32 PM
|
#2 |
|
Senior Member
 
Join Date: Nov 2008
Location: Fannystelle, Manitoba, Canada
Posts: 849
|
Re: Hello from Ontario...
Welcome, nice project you have there.
__________________
Jean-Marc Lacasse 57 GMC 55 GMC 55 Belair 99 S10 http://67-72chevytrucks.com/vboard/s...d.php?t=316140 http://67-72chevytrucks.com/vboard/s...d.php?t=806011 |
|
|
|
|
08-12-2009, 11:48 PM
|
#3 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: Hello from Ontario...
Welcome from California. I don't usually like the chopped tops, but that doesn't look too bad. Not lovin' the shifter, though.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
|
08-13-2009, 12:13 AM
|
#4 |
|
Registered User
Join Date: Jun 2006
Location: Bel Air, Maryland
Posts: 4,853
|
Re: Hello from Ontario...
Welcome to the board from Maryland!!
__________________
The place where you made your stand never mattered. Only that you were there... and still on your feet.
Stephen King |
|
|
|
|
08-13-2009, 12:15 AM
|
#5 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Hello from Ontario...
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
08-13-2009, 12:24 AM
|
#6 |
|
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: Hello from Ontario...
Welcome from FT Worth TX.
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed  Member of the patina club |
|
|
|
|
08-13-2009, 07:28 AM
|
#7 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Hello from Ontario...
 to the board from Mid-MO!!!You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
08-13-2009, 03:12 PM
|
#8 |
|
Step Brother
Join Date: Sep 2007
Location: K-town
Posts: 4,029
|
Re: Hello from Ontario...
Welcome from Knoxville Tn......
|
|
|
|
|
08-13-2009, 05:02 PM
|
#9 |
|
They call me the Breeze...
Join Date: Jul 2007
Location: New York
Posts: 2,251
|
Re: Hello from Ontario...
Welcome from NY!
__________________
Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin |
|
|
|
|
08-13-2009, 05:06 PM
|
#10 |
|
Registered User
Join Date: Jul 2009
Location: benwood,wva
Posts: 53
|
Re: Hello from Ontario...
Welcome from WVa.
|
|
|
|
|
08-14-2009, 03:21 PM
|
#11 |
|
Step Brother
Join Date: Sep 2007
Location: knoxville TN
Posts: 1,950
|
Re: Hello from Ontario...
FROM KNOXVILLE TN!!!
__________________
 Joe
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
