How much does bed weigh? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dznucks · 08-18-2009, 02:23 PM

does anyone know how much a short wheel base bed weighs?
Or how many big fellas its going to take to get it off?

Rack Man · 08-18-2009, 02:40 PM

I took mine off by myself...but I wasn't worried about scratching it either.....I just slid it off the back, lowered to the ground and then stood it up on the tailgate end.....

Later, I had one buddy help me load it on the trailer....Then it took four guys to place it back on the frame after everything was painted..

I also see quite a few guys use an engine hoist to pull them off using some straps on all four corners...

Naterman35 · 08-18-2009, 02:42 PM

When it was empty me and two others lifted mine and sat it on a stand next to it.

eastcoastcivil · 08-18-2009, 02:47 PM

I'm 5'-7" and 150 lbs and my friend is 6'-2" about 195 lbs and we took a LWB box out of an enclosed trailor and placed it on my truck. I would say it weighs about 600 lbs and a SWB would be less?? I would say get yourself and 3 others just to be safe though. We Canadians eat alot of bacon. lol

Ackattack · 08-18-2009, 03:06 PM

I was going to guess about 300lbs for a Short bed

Jim_PA · 08-18-2009, 03:26 PM

I use an engine hoist and some straps in the stake pockets on good beds.

Junk beds and cabs, I just lift up the one side, and flop them off the frame.

69GMCLonghorn · 08-18-2009, 04:22 PM

I use DAY LABORERS!!!

HAHAHA
j/k...

mclairmo · 08-18-2009, 04:42 PM

Day Laborers is right, they are all over everywhere. Have them lift it, pay them $20 each and you are done.

*vegaschevy* · 08-18-2009, 05:18 PM

Quote:

Originally Posted by mclairmo

Day Laborers is right, they are all over everywhere. Have them lift it, pay them $20 each and you are done.

Your getting ripped off, $10 bucks an hour is the rate here

08-18-2009, 02:23 PM	#1
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	How much does bed weigh? does anyone know how much a short wheel base bed weighs? Or how many big fellas its going to take to get it off?

08-18-2009, 02:40 PM	#2
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: How much does bed weigh? I took mine off by myself...but I wasn't worried about scratching it either.....I just slid it off the back, lowered to the ground and then stood it up on the tailgate end..... Later, I had one buddy help me load it on the trailer....Then it took four guys to place it back on the frame after everything was painted.. I also see quite a few guys use an engine hoist to pull them off using some straps on all four corners... __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 08-18-2009 at 02:40 PM.

08-18-2009, 02:42 PM	#3
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: How much does bed weigh? When it was empty me and two others lifted mine and sat it on a stand next to it.

08-18-2009, 02:47 PM	#4
eastcoastcivil Registered User Join Date: Apr 2007 Location: New Brunswick, Canada Posts: 201	Re: How much does bed weigh? I'm 5'-7" and 150 lbs and my friend is 6'-2" about 195 lbs and we took a LWB box out of an enclosed trailor and placed it on my truck. I would say it weighs about 600 lbs and a SWB would be less?? I would say get yourself and 3 others just to be safe though. We Canadians eat alot of bacon. lol __________________ If your not living for something, your dieing for nothing...

08-18-2009, 03:06 PM	#5
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: How much does bed weigh? I was going to guess about 300lbs for a Short bed __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

08-18-2009, 03:26 PM	#6
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: How much does bed weigh? I use an engine hoist and some straps in the stake pockets on good beds. Junk beds and cabs, I just lift up the one side, and flop them off the frame. Last edited by Jim_PA; 08-18-2009 at 03:26 PM.

08-18-2009, 04:22 PM	#7
69GMCLonghorn Registered User Join Date: Dec 2006 Location: Porter Ranch, CA Posts: 978	Re: How much does bed weigh? I use DAY LABORERS!!! HAHAHA j/k...

08-18-2009, 04:42 PM	#8
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: How much does bed weigh? Day Laborers is right, they are all over everywhere. Have them lift it, pay them $20 each and you are done.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.