Anyone need a proportioning valve? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffro788 · 08-26-2009, 04:59 PM

Hey guys, I hate to put this on here and not in parts but my computer wouldn't let me.
Does anyone need a new proportioning valve for 71-72 2wd c/10. Front discs and back drums?
I also have an old one I don't need.
I ordered the new one and the old was actually working, it was just a pain to bleed it correctly.

let me know if anyone is interested.

BCOWANWHEELS · 08-26-2009, 05:13 PM

I bow out as i dont want to break any board rules so i,ll pass

PanelDeland · 08-26-2009, 05:16 PM

The reason you couldn't post in the for sale section is that you are not a subscriber.It's a benefit used to induce members to help support the BB.In the begining there was a guy and he spent his hard earned money to start an internet BB,he worked hard and spent a lot of his free time developing a place for Chevy trucks nuts to enjoy.Finally the thing had grown so large that he needed help to keep it going.Thus a system of subscriptions was implemented.There are different levels for different prices and they are voluntary but each comes with benefits.
If you go to the top of the page there will be a sticky with info.

Longhorn Man · 08-26-2009, 06:44 PM

are you giving this away?

DJMAN · 08-26-2009, 07:28 PM

Quote:

Originally Posted by jeffro788

Hey guys, I hate to put this on here and not in parts but my computer wouldn't let me.
Does anyone need a new proportioning valve for 71-72 2wd c/10. Front discs and back drums?
I also have an old one I don't need.
I ordered the new one and the old was actually working, it was just a pain to bleed it correctly.

let me know if anyone is interested.

I'll take it. (the new one)

PM sent.

jeffro788 · 08-26-2009, 11:05 PM

hey guys, I am sorry if I broke the rules. I didn't realize how it worked, I am new to the site and forums in general. Still learning.

Richard8971 · 08-27-2009, 12:23 AM

Locked.

D

08-26-2009, 04:59 PM	#1
jeffro788 Registered User Join Date: May 2009 Location: Little Rock, AR Posts: 71	Anyone need a proportioning valve? Hey guys, I hate to put this on here and not in parts but my computer wouldn't let me. Does anyone need a new proportioning valve for 71-72 2wd c/10. Front discs and back drums? I also have an old one I don't need. I ordered the new one and the old was actually working, it was just a pain to bleed it correctly. let me know if anyone is interested.

08-26-2009, 05:13 PM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Anyone need a proportioning valve? I bow out as i dont want to break any board rules so i,ll pass __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 08-26-2009 at 09:37 PM.

08-26-2009, 05:16 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Anyone need a proportioning valve? The reason you couldn't post in the for sale section is that you are not a subscriber.It's a benefit used to induce members to help support the BB.In the begining there was a guy and he spent his hard earned money to start an internet BB,he worked hard and spent a lot of his free time developing a place for Chevy trucks nuts to enjoy.Finally the thing had grown so large that he needed help to keep it going.Thus a system of subscriptions was implemented.There are different levels for different prices and they are voluntary but each comes with benefits. If you go to the top of the page there will be a sticky with info. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

08-26-2009, 06:44 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Anyone need a proportioning valve? are you giving this away?

08-26-2009, 11:05 PM	#6
jeffro788 Registered User Join Date: May 2009 Location: Little Rock, AR Posts: 71	Re: Anyone need a proportioning valve? hey guys, I am sorry if I broke the rules. I didn't realize how it worked, I am new to the site and forums in general. Still learning.

08-27-2009, 12:23 AM	#7
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: Anyone need a proportioning valve? Locked. D __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.