SBC Edelbrock Torker and SBC Valve Covers w/pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

terd ferguson · 08-27-2009, 04:34 PM

***THE TITLE IS WRONG. IT SHOULD READ EDELBROCK PERFORMER, NOT TORKER. I CAN'T EDIT THE TITLE. SORRY.***

I switched out my intake and valve covers so these are up for sale. First up is an Edelbrock Performer for the venerable Small Block Chevy engine. This one is dirty, but otherwise in excellent shape. All threads are good, none are stripped. There are no cracks or any damage to anything what so ever. It should clean up as good as new. $75 plus shipping. ***SOLD PENDING FUNDS***

Next is a set of rough SBC valve covers. These have the holes that are straight accross from each other NOT STAGGERED. First the good, the bases are perfectly flat and there are no cracks. The holes are all good. It comes with everything you see in the photos, oil cap, breather, grommet for YOUR pcv valve, and the baffles inside. Now the bad, the paint has chipped/peeled off in places. They were first painted orange, then black (how I got them) and there is a little pitting on the outside where the paint was missing but not too bad. Strip them and repaint for some decent looking stock covers or just run them as they are if you just need to get a project going. $25 plus shipping.

Payment must be a USPS Money Order or discreet cash. I prefer to ship USPS Priority Mail. It's inexpensive and reliable plus you get your stuff in two to three days. I will ship the same day the funds arrive. If you have any questions, please don't hesitate to ask. Thanks for looking and thanks for this great forum.

I love trades more than cash. Here's what I'm looking for...
Metalflake steering wheel
lower outer door patch panels ('60-'66 Chevy truck)
drivers door lower inner patch panel ('60-'63 Chevy truck)
'60-'66 Chevy truck straight fenders, holes are ok, big dents or dents in hard to get out places not ok
Or some other shiny stuff I can't live without.

joe231 · 08-28-2009, 03:58 PM

do you know the part number on that manifold?
Will you take $75 shipped to 73071?

terd ferguson · 08-28-2009, 05:32 PM

I'll see if it has a number on it.

terd ferguson · 08-28-2009, 05:40 PM

Edelbrock 2101 Performer Series intake manifold fits 1955-1986, 262-400 cu. in. Chevrolet V8s Non-EGR.

I'll do $75 shipped. USPS Money Order or discreet cash only.

joe231 · 08-28-2009, 06:18 PM

Oh, cool
it is the number on the back :doh:

what do you mean by discreet cash?
I will take it
pm coming your way

terd ferguson · 08-28-2009, 07:10 PM

PM inbound. Thanks.

joe231 · 08-28-2009, 08:45 PM

08-27-2009, 04:34 PM	#1
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	SBC Edelbrock Torker and SBC Valve Covers w/pics... **THE TITLE IS WRONG. IT SHOULD READ EDELBROCK PERFORMER, NOT TORKER. I CAN'T EDIT THE TITLE. SORRY. I switched out my intake and valve covers so these are up for sale. First up is an Edelbrock Performer for the venerable Small Block Chevy engine. This one is dirty, but otherwise in excellent shape. All threads are good, none are stripped. There are no cracks or any damage to anything what so ever. It should clean up as good as new. $75 plus shipping. SOLD PENDING FUNDS** Next is a set of rough SBC valve covers. These have the holes that are straight accross from each other NOT STAGGERED. First the good, the bases are perfectly flat and there are no cracks. The holes are all good. It comes with everything you see in the photos, oil cap, breather, grommet for YOUR pcv valve, and the baffles inside. Now the bad, the paint has chipped/peeled off in places. They were first painted orange, then black (how I got them) and there is a little pitting on the outside where the paint was missing but not too bad. Strip them and repaint for some decent looking stock covers or just run them as they are if you just need to get a project going. $25 plus shipping. Payment must be a USPS Money Order or discreet cash. I prefer to ship USPS Priority Mail. It's inexpensive and reliable plus you get your stuff in two to three days. I will ship the same day the funds arrive. If you have any questions, please don't hesitate to ask. Thanks for looking and thanks for this great forum. I love trades more than cash. Here's what I'm looking for... Metalflake steering wheel lower outer door patch panels ('60-'66 Chevy truck) drivers door lower inner patch panel ('60-'63 Chevy truck) '60-'66 Chevy truck straight fenders, holes are ok, big dents or dents in hard to get out places not ok Or some other shiny stuff I can't live without. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 08-28-2009 at 07:11 PM.

08-28-2009, 03:58 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... do you know the part number on that manifold? Will you take $75 shipped to 73071? __________________ *CHEVY ONLY* Last edited by joe231; 08-28-2009 at 04:02 PM.

08-28-2009, 05:32 PM	#3
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... I'll see if it has a number on it. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-28-2009, 05:40 PM	#4
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... Edelbrock 2101 Performer Series intake manifold fits 1955-1986, 262-400 cu. in. Chevrolet V8s Non-EGR. I'll do $75 shipped. USPS Money Order or discreet cash only. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-28-2009, 06:18 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... Oh, cool it is the number on the back :doh: what do you mean by discreet cash? I will take it pm coming your way __________________ *CHEVY ONLY*

08-28-2009, 07:10 PM	#6
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... PM inbound. Thanks. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

08-28-2009, 08:45 PM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: SBC Edelbrock Torker and SBC Valve Covers w/pics... __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.