|
08-27-2009, 10:45 PM
|
#1 |
|
Registered User
 Join Date: Aug 2009
Location: Anchorage Alaska
Posts: 28
|
I need new headers
Can anyone recommend a good set of headers? I have an 82 C10 with a 350.
long story short; I had no choice but to roll over a speed bump yesterday and my passenger side header suffered the consequences. My headers are really rusty and weren't in great shape anyhow so I'm not too broken up about it. I don't even know what I currently have as far as brand goes. Last edited by B13B3R; 08-27-2009 at 10:47 PM. |
|
|
|
08-27-2009, 11:16 PM
|
#2 |
|
I have car A.D.D.
Join Date: Feb 2009
Location: Greeley, Northern Colorado
Posts: 4,147
|
Re: I need new headers
I have been told by a couple exhaust shops that the Flowtech brand headers that Checker/O'Reiley parts stores sell, are pretty good. And, very affordable. But I have also seen some of the guys on here mention before that you have to be carefull about how tall the headers are, so you don't smash them again. And, if I remember right, some guys are running Chevelle headers?
__________________
-Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. |
|
|
|
|
08-28-2009, 11:43 PM
|
#3 |
|
At the body shop.
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,202
|
Re: I need new headers
I bought dougs d 310 they dont hang below any thing at all. perfect fit to
 Pricey but worth it
__________________
" That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 08-29-2009 at 12:04 AM. |
|
|
|
|
08-29-2009, 12:55 PM
|
#4 | |
|
Registered User
Join Date: Sep 2004
Location: Elkins, West Virginia
Posts: 2,542
|
Re: I need new headers
Quote:
check out this old post i made where i ask a similar question about different headers that would fit a lowered truck....lots of good info and part numbers  http://67-72chevytrucks.com/vboard/s...evelle+headers
__________________
1987 350 TBI lowered 5/7 |
|
|
|
|
|
08-29-2009, 05:23 PM
|
#5 |
|
At the body shop.
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,202
|
Re: I need new headers
Also the patriot H8021-1 fit really nice too.. Summit says they fit camaros but i had them on my 73 with a sbc they fit
|
|
|
|
|
08-30-2009, 06:30 AM
|
#6 |
|
Registered User
Join Date: Aug 2009
Location: Anchorage Alaska
Posts: 28
|
Re: I need new headers
So I got a pair of these L&L nickel plated headers from a guy locally today, they are used but look to be in awesome shape. I have only gotten as far as getting the old headers off and cleaning up the heads for the new pair, I forgot to get gaskets so I will have to finish up tomorrow.
After getting my old headers off I discovered that they are Hedman 69090's. I will post pictures Monday of how smashed they are by the collector. |
|
|
|
|
08-30-2009, 06:37 AM
|
#7 |
|
Registered User
Join Date: Aug 2009
Location: Anchorage Alaska
Posts: 28
|
Re: I need new headers
OK, I lied, here is a pic now. The damaged header doesn't look as bad off of the truck as it did on but I think the new unsmashed ones should help performance a bit, and they are not covered in rust.
Is anyone else running these L&L headers? I'm curious how they are since I won't know for at least a day. |
|
|
|
|
08-30-2009, 12:04 PM
|
#8 |
|
Registered User
Join Date: Mar 2009
Location: TN
Posts: 410
|
Re: I need new headers
I have a set of Hedmans on mine, been on there for 10 years now with no problems and only rust around the collector because I neglected the truck a little bit.
I'm going to fully restore mine sometime next year and expect to sandblast and repaint the Hedmans that are on it because they fit so well.
__________________
'69 Dodge Charger R/T 440, 727, 3.55 Sure Grip '68 Plymouth Road Runner 383, 727, 3.23 Sure Grip '89 Dodge Diplomat ex cop car 408, 727, 3.55 Sure Grip '77 Dodge Monaco ex cop car 440, 727, 2.71 '79 Dodge 'Lil Red Express pickup 360, 727, 3.55 Sure Grip '12 Dodge Challenger SRT8 392, M6, 3.92 '85 Chevrolet C-10 SWB 2wd 305, TH350, 2.73 |
|
|
|
|
08-30-2009, 07:21 PM
|
#9 |
|
Registered User
Join Date: Aug 2009
Location: Alpharetta, GA
Posts: 32
|
Re: I need new headers
I've got a set of Jeg's branded longtubes. They are 16-gauge construction. I haven't had an issue with leaking at all since I put them in.
__________________
http://sites.google.com/site/project77site/home |
|
|
|
|
08-30-2009, 09:02 PM
|
#10 |
|
Registered User
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
|
Re: I need new headers
I'm running 3/4 length dynomax headers on the '78. They fit well and allow you to tuck the exhaust up so you cant see it under the truck.
I posted pics and part numbers on here when I built the motor about 5-6 years ago. I have no idea what the part number is now though....
__________________
Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded  '03 burb. Family cruiser http://upstategmtrucks.com/ |
|
|
|
|
08-30-2009, 10:14 PM
|
#11 |
|
Registered User
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
|
Re: I need new headers
i like my hedman elite's.no collector gaskets.there great.
__________________
" Never look up a dead dogs butt."
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
