Sheet metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Driveway Dreams · 08-28-2009, 01:06 AM

MAKE ME OFFERS PLEASE!!
The list:
1 86 Custom Deluxe radiator support $30
1 filler panel for below the grill $15 each
1 Suburban front bumper with impact strip $30
1 Suburban rear bumper with impact stip $30
1 set of stock spindles from my 86 c-10 1" rotors $25

I want these things gone. I have a set of fenders & hood from a 89-91 Jimmy. Original paint, peeling clear, straight panels, VERY minor rust. These are all from the Jimmy clip I just picked up. I am not going to use the sheet metal, so it is up for sale. The right fender has MINOR rust on the inner (see detailed picture). The rust is nothing major.

Driveway Dreams · 08-28-2009, 01:07 AM

Fenders include the inners. The side markers, however, are not included. Questions about these parts? Just ask.

*nekkidhillbilly* · 08-30-2009, 05:25 PM

id like to have but your way far away

Driveway Dreams · 08-30-2009, 06:30 PM

Sounds like a good excuse for a road trip.

Help pay for gas & I will get them part way to you.

Driveway Dreams · 09-02-2009, 05:06 PM

These are all off of an 89 Jimmy or my 86 C-10. The hood & fenders will fit Blazer, Jimmy, Burbs, & trucks. All prices are OBO, I need them gone. Will trade for SBC intake, carb, or distributor

The list that is left:
1 86 Custom Deluxe radiator support $30
1 filler panel for below the grill $15 each
1 Suburban front bumper with impact strip $30
1 Suburban rear bumper with impact stip $30
1 set of stock spindles from my 86 c-10 1" rotors $25

Driveway Dreams · 09-03-2009, 12:16 AM

Took some more pictures today. Here you go.

Driveway Dreams · 09-03-2009, 02:41 PM

The one white fender is taken. The others are available still though. Help a guy out!

Driveway Dreams · 09-06-2009, 11:36 PM

Bump. Offers?

Driveway Dreams · 09-11-2009, 11:58 PM

Make offers, please. I want to get these things gone. I don't have room for it all.

dammitmitchell · 09-12-2009, 12:16 AM

i could use the bumper bolts..
=-)

Driveway Dreams · 09-12-2009, 12:22 AM

Front bumper bolts? From the Burb bumper?

dammitmitchell · 09-12-2009, 11:14 AM

front and rear bumper bolts the chrome capped ones about 4 or 5 of them but hey i'll take a "lot" (set) they shouldnt be any different right?

Driveway Dreams · 09-12-2009, 01:54 PM

Let me see what all I have that I can part away from the bumpers. I will let you know.

Driveway Dreams · 09-22-2009, 01:29 PM

Bump. Still have these. Need them gone!

Driveway Dreams · 09-29-2009, 12:46 PM

The list:
1 86 Custom Deluxe radiator support $30
1 filler panel for below the grill $15 each
1 Suburban front bumper with impact strip $30
1 Suburban rear bumper with impact stip $30
1 set of stock spindles from my 86 c-10 1" rotors $25

*nekkidhillbilly* · 09-30-2009, 05:58 PM

Quote:

Originally Posted by Driveway Dreams

Sounds like a good excuse for a road trip.

Help pay for gas & I will get them part way to you.

well i just got a whole half ton with a perfect boby give to me

Driveway Dreams · 10-07-2009, 04:37 PM

Bump! Will trade for an intake, carb, and/or HEI distributor.

SBTork · 10-07-2009, 11:45 PM

I have a nice carter 600cfm electric choke carb i'd trade for some metal. I could use the fenders and hood. The bad part is i'd be hell for you to ship them here and im way further away than tempting to drive.

Driveway Dreams · 10-08-2009, 12:22 AM

You have any clue what they weigh? I would probably split shipping with you if you want to do that and it is reasonable enough.

SBTork · 10-08-2009, 01:28 AM

Quote:

Originally Posted by Driveway Dreams

You have any clue what they weigh? I would probably split shipping with you if you want to do that and it is reasonable enough.

Well, I can do some checking tomorrow. All I am really in need of are the fenders, I don't need a hood or the inner fenders. Ill get some aprox lb measurments and we can go from there. What's your zip code?

Driveway Dreams · 10-08-2009, 11:15 AM

80634

Driveway Dreams · 10-08-2009, 11:35 PM

I got a call from a local guy who came and bought my left fender, hood, & grill. So those are not available. But, Adam, I will PM you about your carb. I would like to figure it out some how with you.

Driveway Dreams · 10-25-2009, 12:30 AM

Bump still have a few things left. SEE POST #5.

sdime95 · 10-29-2009, 07:16 PM

hey i met you at the sept meet at the park do you still have
1 81-91 right fender (Dk Blue/Silver) with inner $25

if so i will come pick when the roads get a little better please pm me

Driveway Dreams · 10-29-2009, 11:21 PM

Its yours man! What else you need? I will PM you my number.

08-28-2009, 01:06 AM	#1
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Sheet metal MAKE ME OFFERS PLEASE!! The list: 1 86 Custom Deluxe radiator support $30 1 filler panel for below the grill $15 each 1 Suburban front bumper with impact strip $30 1 Suburban rear bumper with impact stip $30 1 set of stock spindles from my 86 c-10 1" rotors $25 I want these things gone. I have a set of fenders & hood from a 89-91 Jimmy. Original paint, peeling clear, straight panels, VERY minor rust. These are all from the Jimmy clip I just picked up. I am not going to use the sheet metal, so it is up for sale. The right fender has MINOR rust on the inner (see detailed picture). The rust is nothing major. Attached Images __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 11-03-2009 at 01:12 AM. Reason: $$

08-28-2009, 01:07 AM	#2
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Fenders include the inners. The side markers, however, are not included. Questions about these parts? Just ask. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 08-28-2009 at 01:18 AM.

08-30-2009, 05:25 PM	#3
nekkidhillbilly Account Suspended Join Date: Apr 2009 Location: hazard, ky Posts: 1,674	Re: Sheet metal id like to have but your way far away

08-30-2009, 06:30 PM	#4
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Sounds like a good excuse for a road trip. Help pay for gas & I will get them part way to you. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 08-30-2009 at 06:32 PM.

09-03-2009, 12:16 AM	#6
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Took some more pictures today. Here you go. Attached Images __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-02-2009, 05:06 PM	#5
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal These are all off of an 89 Jimmy or my 86 C-10. The hood & fenders will fit Blazer, Jimmy, Burbs, & trucks. All prices are OBO, I need them gone. Will trade for SBC intake, carb, or distributor The list that is left: 1 86 Custom Deluxe radiator support $30 1 filler panel for below the grill $15 each 1 Suburban front bumper with impact strip $30 1 Suburban rear bumper with impact stip $30 1 set of stock spindles from my 86 c-10 1" rotors $25 __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 11-02-2009 at 12:50 AM. Reason: need them gone

09-03-2009, 02:41 PM	#7
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal The one white fender is taken. The others are available still though. Help a guy out! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 09-03-2009 at 02:42 PM.

09-06-2009, 11:36 PM	#8
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Bump. Offers? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-11-2009, 11:58 PM	#9
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Make offers, please. I want to get these things gone. I don't have room for it all. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 09-12-2009 at 12:01 AM.

09-12-2009, 12:16 AM	#10
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Sheet metal i could use the bumper bolts.. =-) __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

09-12-2009, 12:22 AM	#11
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Front bumper bolts? From the Burb bumper? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-12-2009, 11:14 AM	#12
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Sheet metal front and rear bumper bolts the chrome capped ones about 4 or 5 of them but hey i'll take a "lot" (set) they shouldnt be any different right? __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

09-12-2009, 01:54 PM	#13
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Let me see what all I have that I can part away from the bumpers. I will let you know. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-22-2009, 01:29 PM	#14
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Bump. Still have these. Need them gone! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-29-2009, 12:46 PM	#15
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal The list: 1 86 Custom Deluxe radiator support $30 1 filler panel for below the grill $15 each 1 Suburban front bumper with impact strip $30 1 Suburban rear bumper with impact stip $30 1 set of stock spindles from my 86 c-10 1" rotors $25 __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 11-02-2009 at 12:51 AM.



Register or Log In To remove these advertisements.

10-07-2009, 04:37 PM	#17
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Bump! Will trade for an intake, carb, and/or HEI distributor. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-07-2009, 11:45 PM	#18
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Sheet metal I have a nice carter 600cfm electric choke carb i'd trade for some metal. I could use the fenders and hood. The bad part is i'd be hell for you to ship them here and im way further away than tempting to drive. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-08-2009, 12:22 AM	#19
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal You have any clue what they weigh? I would probably split shipping with you if you want to do that and it is reasonable enough. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-08-2009, 11:15 AM	#21
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal 80634 __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-08-2009, 11:35 PM	#22
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal I got a call from a local guy who came and bought my left fender, hood, & grill. So those are not available. But, Adam, I will PM you about your carb. I would like to figure it out some how with you. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-25-2009, 12:30 AM	#23
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Bump still have a few things left. SEE POST #5. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-29-2009, 07:16 PM	#24
sdime95 Registered User Join Date: Sep 2009 Location: Littleton, CO Posts: 33	Re: Sheet metal hey i met you at the sept meet at the park do you still have 1 81-91 right fender (Dk Blue/Silver) with inner $25 if so i will come pick when the roads get a little better please pm me __________________ 1984 Sierra 1/2 ton 4x4 swb 1987 Silverado 2wd swb 3/4 drop

10-29-2009, 11:21 PM	#25
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Sheet metal Its yours man! What else you need? I will PM you my number. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

Register or Log In To remove these advertisements.