SBC stuff and Chevy truck parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 08-29-2009, 01:57 PM

I have the following Small Block Chevy components for sale and a few other items. Please post in this thread if you would like to purchase or make an offer on anything. First come first serve. If you PM me and someone post in this thread for the same item I will have to give it to the person who posted. Thank you.

Moroso Tall Valve Covers/Water Pump Pulley for long style water pump. $20 plus shipping

Fiberglass Flex Fan with spacer. sold

Megs Tips, good condition, no pitting or rust. Sold

Dual Points Distributor. Sold

LCM stock replacement coil springs. SOLD

Headers: Sold

XM radio with home and car kit, everything included to connect and use. Sold

Some of these item will fit in the USPS priority flat rate boxes could be $8-$15 to ship the item.

BusinessProfessor · 08-29-2009, 07:43 PM

Wild,

I can use the flex fan and spacer. i am in Staten Island.

Wild83C10 · 08-29-2009, 09:47 PM

BusinessProfessor
Shipped to you via USPS priority mail would be $15.50
UPS:
$19.25

Your more then welcome to pick it up if your down in Monmouth County. Let me know.
Thanks

BusinessProfessor · 08-29-2009, 10:19 PM

Wild,

If you send me directions and address, I can come and pick it up. School-work doesn't start till the eighth of Sept.

George

JQE80 · 08-30-2009, 11:57 PM

How much do you think shipping would be for the headers to 45420?

Jarrid

Wild83C10 · 08-31-2009, 09:03 PM

Quote:

Originally Posted by JQE80

How much do you think shipping would be for the headers to 45420?

Jarrid

Sent you a PM

Wild83C10 · 09-02-2009, 05:15 PM

Flex Fan sold, thanks BusinessProfessor. It was good to meet you and good luck with the truck.

Wild83C10 · 09-02-2009, 09:00 PM

Headers sold, thanks Jarrid!

BusinessProfessor · 09-03-2009, 07:11 PM

Wild,

Thank you for your hospitality. I checked my fan and it is, indeed, a three bladed clutch fan. I enjoyed the ride from SI to NJ and the return. No traffic and I bought gas for 50 cents cheaper than in SI.

Wild83C10 · 09-06-2009, 10:40 PM

make offers!

Scootin 81 C20 · 09-07-2009, 09:27 PM

What size is the inlet on the megaphone tips?

JQE80 · 09-07-2009, 11:53 PM

Got the headers on Sat. look good thanks

Jarrid

Wild83C10 · 09-08-2009, 06:22 PM

Quote:

Originally Posted by Scootin 81 C20

What size is the inlet on the megaphone tips?

I believe they are 2.5", but could be 2.25". I will check tomorrow night when I am at the garage.

Wild83C10 · 09-08-2009, 06:23 PM

Quote:

Originally Posted by JQE80

Got the headers on Sat. look good thanks

Jarrid

Good to hear you got them.

Scootin 81 C20 · 09-08-2009, 08:23 PM

If they are 2" or 2.25", I may be interested in them.

Wild83C10 · 09-09-2009, 09:27 PM

The tips will fit on a 2.25" pipe.

Rollinsqrbdy · 09-13-2009, 10:09 PM

Still got the coils?

Wild83C10 · 09-14-2009, 09:49 PM

Yup still got the coils. The spiders might be upset if I move them though.

cor86 · 09-15-2009, 04:15 PM

I sent you a PM regarding the coil springs.

cor86 · 09-16-2009, 03:16 PM

I sent another PM about the coils.

cor86 · 09-16-2009, 09:21 PM

Coil springs paid for.

Wild83C10 · 09-16-2009, 10:43 PM

Yup springs are sold, thanks cor86.

cor86 · 09-22-2009, 01:56 PM

Springs came the other day. Look good and no problems. Fast shipping, too. Thanks a bunch.

Wild83C10 · 09-26-2009, 07:13 PM

PAckage Deal for the valve covers and water pump pulley, $20 for both plus shipping.

08-29-2009, 01:57 PM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	SBC stuff and Chevy truck parts I have the following Small Block Chevy components for sale and a few other items. Please post in this thread if you would like to purchase or make an offer on anything. First come first serve. If you PM me and someone post in this thread for the same item I will have to give it to the person who posted. Thank you. Moroso Tall Valve Covers/Water Pump Pulley for long style water pump. $20 plus shipping Fiberglass Flex Fan with spacer. sold Megs Tips, good condition, no pitting or rust. Sold Dual Points Distributor. Sold LCM stock replacement coil springs. SOLD Headers: Sold XM radio with home and car kit, everything included to connect and use. Sold Some of these item will fit in the USPS priority flat rate boxes could be $8-$15 to ship the item. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 09-26-2009 at 07:12 PM. Reason: update

08-29-2009, 07:43 PM	#2
BusinessProfessor Registered User Join Date: Jan 2009 Location: Staten Island, NY Posts: 109	Re: SBC stuff and Chevy truck parts Wild, I can use the flex fan and spacer. i am in Staten Island. __________________

08-29-2009, 09:47 PM	#3
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts BusinessProfessor Shipped to you via USPS priority mail would be $15.50 UPS: $19.25 Your more then welcome to pick it up if your down in Monmouth County. Let me know. Thanks __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 08-29-2009 at 09:47 PM.

08-29-2009, 10:19 PM	#4
BusinessProfessor Registered User Join Date: Jan 2009 Location: Staten Island, NY Posts: 109	Re: SBC stuff and Chevy truck parts Wild, If you send me directions and address, I can come and pick it up. School-work doesn't start till the eighth of Sept. George __________________

08-30-2009, 11:57 PM	#5
JQE80 Registered User Join Date: Jul 2001 Location: Dayton,OH Posts: 50	Re: SBC stuff and Chevy truck parts How much do you think shipping would be for the headers to 45420? Jarrid __________________ 79 c-10 big 10

09-02-2009, 05:15 PM	#7
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts Flex Fan sold, thanks BusinessProfessor. It was good to meet you and good luck with the truck. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-02-2009, 09:00 PM	#8
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts Headers sold, thanks Jarrid! __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-03-2009, 07:11 PM	#9
BusinessProfessor Registered User Join Date: Jan 2009 Location: Staten Island, NY Posts: 109	Re: SBC stuff and Chevy truck parts Wild, Thank you for your hospitality. I checked my fan and it is, indeed, a three bladed clutch fan. I enjoyed the ride from SI to NJ and the return. No traffic and I bought gas for 50 cents cheaper than in SI. __________________

09-06-2009, 10:40 PM	#10
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts make offers! __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-07-2009, 09:27 PM	#11
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: SBC stuff and Chevy truck parts What size is the inlet on the megaphone tips? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

09-07-2009, 11:53 PM	#12
JQE80 Registered User Join Date: Jul 2001 Location: Dayton,OH Posts: 50	Re: SBC stuff and Chevy truck parts Got the headers on Sat. look good thanks Jarrid __________________ 79 c-10 big 10

09-08-2009, 08:23 PM	#15
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: SBC stuff and Chevy truck parts If they are 2" or 2.25", I may be interested in them. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

09-09-2009, 09:27 PM	#16
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts The tips will fit on a 2.25" pipe. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-13-2009, 10:09 PM	#17
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: SBC stuff and Chevy truck parts Still got the coils? __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

09-14-2009, 09:49 PM	#18
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts Yup still got the coils. The spiders might be upset if I move them though. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time



Register or Log In To remove these advertisements.

09-15-2009, 04:15 PM	#19
cor86 Registered User Join Date: Mar 2009 Location: Warsaw, IN Posts: 93	Re: SBC stuff and Chevy truck parts I sent you a PM regarding the coil springs.

09-16-2009, 03:16 PM	#20
cor86 Registered User Join Date: Mar 2009 Location: Warsaw, IN Posts: 93	Re: SBC stuff and Chevy truck parts I sent another PM about the coils.

09-16-2009, 09:21 PM	#21
cor86 Registered User Join Date: Mar 2009 Location: Warsaw, IN Posts: 93	Re: SBC stuff and Chevy truck parts Coil springs paid for.

09-16-2009, 10:43 PM	#22
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts Yup springs are sold, thanks cor86. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-22-2009, 01:56 PM	#23
cor86 Registered User Join Date: Mar 2009 Location: Warsaw, IN Posts: 93	Re: SBC stuff and Chevy truck parts Springs came the other day. Look good and no problems. Fast shipping, too. Thanks a bunch.

09-26-2009, 07:13 PM	#24
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: SBC stuff and Chevy truck parts PAckage Deal for the valve covers and water pump pulley, $20 for both plus shipping. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

Register or Log In To remove these advertisements.